Loading...
Search for: najafi--mehrdad
0.145 seconds

    Multi-level decomposition approach for problem solving and design in software engineering

    , Article Proceedings of the Annual Southeast Conference, 24 March 2011 through 26 March 2011 ; March , 2011 , Pages 249-254 ; 9781450306867 (ISBN) Najafi, A ; Niu, N ; Najafi, F ; Sharif University of Technology
    2011
    Abstract
    In general, decomposition methods can facilitate the process of solving sophisticated and heterogonous problems in the area of software development and engineering. These approaches are assisting to decompose problems based on different disciplines, characteristics and functionalities that is results into increasing the computational efficiency (e.g. parallel processing/computing) and accelerate the software changing process, software modifications and error tracking. Essentially, these approaches contribute to the degree of modularity to decompose a complex problem into different sub-problems and to focus on local objectives. There are different approaches that are used to decompose a... 

    A mathematical analysis of the mechanism of ultrasonic induced fluid percolation in porous media: Part I

    , Article Proceedings - SPE Annual Technical Conference and Exhibition, 20 September 2010 through 22 September 2010 ; Volume 7 , September , 2010 , Pages 5833-5856 ; 9781617389641 (ISBN) Najafi, I ; Sharif University of Technology
    2010
    Abstract
    This work concerns with experimentally and analytically investigation of free gravity drainage process in porous media under the influence of ultrasonic wave radiation. Glass beads ranges from 70 to 100 mesh sizes were packed and used in the tests. The working fluids consist of distilled water, kerosene and Doroud and Paidar crude oils as wetting and air as non-wetting phase. The measured oil recovery data along with Hagoort (1984) backward methodology were used to determine and to compare the relative permeability of wetting phases in presence and absence of ultrasonic radiation. In addition the relative permeability of non-wetting phases for both cases were calculated from inverse modeling... 

    Flight envelope expansion in landing phase using classic, intelligent and adaptive controllers [electronic resource]

    , Article Journal of aircraft ; 2006, Vol. 43, No. 1 Malaek .S. M. B ; Izadi, Hojjat Allah ; Pakme, Mehrdad
    Abstract
    An expanding flight envelope in the landing phase of a typical jet transport aircraft in presence of strong wind shears using a learning capable control system (LCCS) is investigated. The idea stems fromhuman beings functional architecture that gives them the ability to do more as they age and gain more experience. With the knowledge that classical controllers lack sufficient generality to cope with nonlinear as well as uncertain phenomenon such as turbulent air, the focuse is on different types of intelligent controllers due to their learning and nonlinear generalization capabilities as candidates for the landing flight phase. It is shown that the latter class of controllers could be used... 

    An efficient graphyne membrane for water desalination

    , Article Polymer ; Volume 175 , 2019 , Pages 310-319 ; 00323861 (ISSN) Mehrdad, M ; Moosavi, A ; Sharif University of Technology
    Elsevier Ltd  2019
    Abstract
    Desalination of sea saline water seems a successful solution to supply clean water. For desalination, novel nanoporous membranes have been proposed as a substitute for the classic reverse osmosis (RO) membranes. The one-atom-thick graphyne membrane has shown great potential in water desalination. By applying functional groups (FGs) into the pores of the monolayer graphyne membranes, the water permeability and the ion rejection were passively increased. The effects of applying various FGs such as Hydrogen, Fluorine, Carboxyl and Amine, effect of the salt concentration, the applied pressure, and the effective diameter of the graphyne pores were determined by molecular dynamics (MD)... 

    Optimal Design of the Heliostat Field in the Solar Central Receiver Systems

    , M.Sc. Thesis Sharif University of Technology Piroozmand, Pasha (Author) ; Boroushaki, Mehrdad (Supervisor)
    Abstract
    In a solar central system plant about 40% of energy losses occurs in the heliostat field. Furtheremore, half of the investment costs for construction of the plant is related to the heliostat field. Therefore, an optimal design of the heliostat field is necessary for reduction of levelized cost of energy in solar tower power plants. In this study, in order to optimally design the heliostat field, first energy performance of the helistat field in one year is simulated. Solar power and sun’s position at each moment of the day is determined by mathematical relations. Then, loss factors in the field are modelled and heliostat field layout is designed by an algorithm. Finally, by using PSO... 

    Simulation and Multi-Objective Optimization of a Solar Micro CCHP Using Intelligent Techniques

    , M.Sc. Thesis Sharif University of Technology Younesi, Ali (Author) ; Boroushaki, Mehrdad (Supervisor)
    Abstract
    Today, due to the scarcity of fossil energy resources, security of energy supply, and increasing environmental concerns, we need to develop new technologies to promote energy-saving and reduce greenhouse gas emissions. One of the suitable options for this purpose is to use the simultaneous production of electric power, cooling, and heating. Meanwhile, trigeneration systems that provide part of their energy needs from the sun, due to the free solar energy source and low environmental impact, can be an ideal technology for clean and safe scattered production. The present study has suggested a trigeneration system of cooling, heating, and power generation based on the organic Rankin cycle and... 

    Optimal Design of Induction MHD Generator for Electrical Power Generation from Exhaust of the Gas Turbine Power Plants

    , M.Sc. Thesis Sharif University of Technology Barzegar, Iran (Author) ; Boroushaki, Mehrdad (Supervisor)
    Abstract
    Today, due to increasing electricity consumption and demand, the use of conventional systems such as thermal, hydro and nuclear power plants is not enough to convert energy. Over the past century, scientists have sought to discover new technologies for exploiting different forms of energy and converting them into high-efficiency electrical energy. One of these ways is to use the phenomenon of magnetohydrodynamics (magnetic fluid dynamics) to convert thermal energy directly into electrical energy. Magnetohydrodynamics is a theoretical field that studies the dynamics of fluids with electrical conductivity. Induction magneto-hydrodynamic generators use ionized hot plasma (a quasi-neutral gas of... 

    Modeling and Optimal Design of a Solar Chimney Power Plant

    , M.Sc. Thesis Sharif University of Technology Gharagozlou, Ali (Author) ; Boroushaki, Mehrdad (Supervisor)
    Abstract
    The power generation system of this type of power plants operates on the air flowing through the power plant’s chimney and colliding with the turbine blades within the chimney. When the solar collector warms the nearby air and thus expands the air by absorbing the sunlight, a difference is created in the density. Then, this difference in the density creates the phenomenon of buoyancy, making the air pass to the top of the chimney through the collector.This study simulated and optimized a solar chimney power plant. The simulation and optimization were performed based on the information of Manzanares Solar Chimney Power Plant in Spain (located in 150 km from the south of Madrid). It was... 

    Intelligent Control of Hybrid Vehicles based on the Simultaneous Optimization of Fuel Consumption and Pollution Emission

    , M.Sc. Thesis Sharif University of Technology Mamouri, Ali (Author) ; Boroushaki, Mehrdad (Supervisor)
    Abstract
    The issue under discussion in this paper is to optimize the fuel consumption of the Toyota Prius hybrid car. In order to solve this problem, the ADVISOR design model used by NREL in the Matlab / Simulink environment has been used. Various parts of this model are described. The optimization performed on this issue is based on the emotional controller. This controller works by simulating learning in animals based on encouraging and punishing them. With the introduction of the controller, the model and its inclusion in the fuel consumption control and its implementation have achieved good results. In the initial state and the controller in the model, the fuel consumption was 4.9 liters per 100... 

    Active Control of Drag Force in Automobile in Order to Reduce Fuel Consumption

    , M.Sc. Thesis Sharif University of Technology Mehrafsar, Moein (Author) ; Boroushaki, Mehrdad (Supervisor)
    Abstract
    In this thesis, an attempt has been made to provide a smart and innovative system to optimize fuel consumption in cars by using the combination of engineering sciences, aerospace, and machine learning. Considering the current challenges of societies, the economic importance of saving fuel, as well as recent developments in the fields of machine learning and reinforcement learning, this research tries to improve the performance of cars in order to minimize the air resistance force of car bodies. In this regard, deep neural networks have been used to learn the dynamics of aerodynamic forces and reinforcement learning algorithms, especially DDPG (Deep Deterministic Policy Gradient), have been... 

    Development of sol-gel-derived multi-wall carbon nanotube/hydroxyapatite nanocomposite powders for bone substitution

    , Article Journal of Composite Materials ; Vol. 48, issue. 4 , February , 2014 , pp. 483-489 ; ISSN: 00219983 Hooshmand, T ; Abrishamchian, A ; Najafi, F ; Mohammadi, M ; Najafi, H ; Tahriri, M ; Sharif University of Technology
    2014
    Abstract
    Carbon nanotubes with unique physical and mechanical properties have shown great potential for biological applications, including tissue engineering and mimicking the structure and properties of human bones. In the present work, sol-gel synthesized nanocomposite powder of multi-wall carbon nanotube/hydroxyapatite characterized using field-emission scanning electron microscopy, transmission electron microscope, X-ray diffraction, Fourier transform infra-red spectroscopy and thermal analyses. The results show homogenous dispersion of nanotube in well-crystallized hydroxyapatite ceramic matrix. Scanning electron microscopy and transmission electron microscope observations show the sodium... 

    Evaluation of relationship among filler amount, degree of conversion, and cytotoxicity: approaching performance enhancement novel design for dental Bis-GMA/UDMA/TEGDMA composite

    , Article International Journal of Polymeric Materials and Polymeric Biomaterials ; Volume 66, Issue 16 , 2017 , Pages 844-852 ; 00914037 (ISSN) Najafi, H ; Akbari, B ; Najafi, F ; Abrishamkar, A ; Ramedani, A ; Yazdanpanah, A ; Sharif University of Technology
    2017
    Abstract
    Dental composites of A2 color using Bis-GMA, urethane dimethacrylate and triethyleneglycol dimethycrylate resins (70/20/10), and silica filler (70 wt%, 75 wt%, and 80 wt%), a hybrid of nano- and microsilica particles, are made and subjected to the following tests: Fourier transform infrared spectroscopy (FTIR), particle size analyzer, scanning electron microscope (SEM), and also cytotoxicity. FTIR results show that an increase in filler amount yields to a decrease in degree of conversion. Therefore, there should be a compromise between degree of conversion and the filler amount. SEM images manifest the uniformity of silica particles. It is shown from the cytotoxicity tests that as the... 

    The Impact of Human Capital on Labour Productivity in Manufacturing Sectors of Iran

    , M.Sc. Thesis Sharif University of Technology Narimani, Meysam (Author) ; Sepahvand, Mehrdad (Supervisor)
    Abstract
    This research has been surveyed the impact of intermediate skilled and high skilled human labor force on the productivity of manufacturing sectors by the Nelson & Phelps and also Lucas approaches. first model is related to the level of productivity and the second model is related to the growth of it. We has been prepared the needed statistics from the raw figures of iran statistics center. regression analysis has been done on the basis of panel data model by the use of stata software. the results show that not good efficiency to optimize technology factor of Cobb-Douglas model although it shows higher marginal labor productivity of high skilled human labor force. we has proposed some... 

    Design of a Wide Band Power Amplifier for Power DAC

    , M.Sc. Thesis Sharif University of Technology Hassani, Keyvan (Author) ; Sharifbakhtiar, Mehrdad (Supervisor)
    Abstract
    Today’s radio transmitters must be able to send information in several standards. One problem involved in these wide band electronic systems lies in its end part, ie power amplifier. To have a broad band width either switching must be made among several power amplifiers with narrow band width (tuned) or the transistor part of power amplifier must be the same and single and selection be made only among matching networks. In this thesis, a power amplifier with broad band width without requiring a matching network has been designed and laid out. Also considering the low breakdown voltage of the gate oxide of the today’s standard CMOS transistors, it is very difficult to get a high output power... 

    Design of a HEV’s Controller Using Learning-based Methods

    , M.Sc. Thesis Sharif University of Technology Zare, Aramchehr (Author) ; Boroushaki, Mehrdad (Supervisor)
    Abstract
    Hybrid electric vehicles (HEV) are proving to be one of the most promising innovations in advanced transportation systems to reduce air pollution and fossil fuel consumption. EMS is one of the most vital aspects of the HEV powertrain system. This research aims to design an optimal EMS under the condition of meeting the goals of drivability control, fuel consumption reduction, and battery charge stability. The current EMS is based on the classical rule-based method derived from fuzzy logic, which guides to the suboptimal solution in episodic driving cycles. Previous experiences in implementing Reinforcement Learning (RL) suffer from late convergence, instability in tracking the driving... 

    Optimal Design of Permanent Magnet Vernier Generator for Wind Power Plants Application

    , M.Sc. Thesis Sharif University of Technology Esmailoghli, Habib (Author) ; Boroushaki, Mehrdad (Supervisor)
    Abstract
    In recent decades, renewable energy resources (especially wind power as the fastest-growing energy source) have increasingly been employed for providing electrical energy all over the world given to the rising energy demands, reduction in non-renewable fossil fuels as well as severe restrictions applied to the utilization of these fuels because of their contribution in environmental pollution, generating greenhouse gas emissions, and consequently earth warming. The main factors in the development of wind energy systems to date are the easy access to this energy source in all seasons and its cost-effectiveness compared to other counterparts. One of the key components utilized for converting... 

    Design and Implementation of a Linear, 1 Watt, High Efficiency Power Amplifier with Controllable Output Power for UHF-RFID Application

    , M.Sc. Thesis Sharif University of Technology Sadeghi, Sanaz (Author) ; Sharifbakhtiar, Mehrdad (Supervisor)
    Abstract
    Design and implementation of an efficient, 1 Watt, linear power amplifier (PA) with CMOS technology for UHF-RFID applications is presented in this thesis. Poor quality factor of inductors, high substrate noise and low breakdown voltage of CMOS, makes the implementation of Watt-level PAs challenging on this technology. Also the trade-off between linearity and efficiency, further hardens achieving an efficient high power linear PA. So the literature was reviewed first to come up with the appropriate structure of a linearized efficient PA. Afterwards, the structure was reformed and optimized for the application mentioned above with reasonable stability margins. Baseband relevant blocks were... 

    A Multi-Objective Robust Optimization Model for Logistics Planning in the Earthquake Response Phase [electronic resource]

    , Article Transportation Research Part E: Logistics and Transportation Review, Elsevier ; Volume 49, Issue 1, January 2013, , Pages 217–249 Najafi, M. (Mehdi) ; Eshghi, Kourosh ; Dullaert, Wout ; Sharif University of Technology
    Abstract
    Usually, resources are short in supply when earthquakes occur. In such emergency situations, disaster relief organizations must use these scarce resources efficiently to achieve the best possible emergency relief. This paper therefore proposes a multi-objective, multi-mode, multi-commodity, and multi-period stochastic model to manage the logistics of both commodities and injured people in the earthquake response. Also, a robust approach is developed and used to make sure that the distribution plan performs well under the various situations that can follow an earthquake. Afterwards, it proposes a solution methodology according to hierarchical objective functions and uses it to illustrate the... 

    Numerical investigation of flow pattern and hydrodynamic forces of submerged marine propellers using unsteady boundary element method

    , Article Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment ; Volume 233, Issue 1 , 2019 , Pages 67-79 ; 14750902 (ISSN) Najafi, S ; Abbaspoor, M ; Sharif University of Technology
    SAGE Publications Ltd  2019
    Abstract
    In this study, a numerical model of unsteady potential flow around submerged marine propellers has been developed. The boundary element approach in combination with time stepping method to model free wake dynamics has been implemented. An important feature of this method in the simulation of pressure-dominant problems is a proper balance between time and accuracy in the numerical process. Another advantage of time stepping method is that there is no need to define wake geometry before modeling. Due to inherent instability of boundary integral equations, a smoothing function to damp the effect of singularities is imposed to the solution. The main innovative idea of this work is that the... 

    Numerical study of propulsion performance in swimming fish using boundary element method

    , Article Journal of the Brazilian Society of Mechanical Sciences and Engineering ; Volume 39, Issue 2 , 2017 , Pages 443-455 ; 16785878 (ISSN) Najafi, S ; Abbaspour, M ; Sharif University of Technology
    Springer Verlag  2017
    Abstract
    In this paper, hydrodynamic simulation of fish-like swimming for two types of aquatic animals including tuna fish and giant danio is presented. We employ an unsteady three-dimensional inviscid boundary element method including time stepping algorithm to capture the wake sheet and flow features around swimming fish in a straight course. At each time step, an unsteady Bernoulli equation was used to find the pressure distribution and thrust generated by the animal. To couple fluid solver with kinematic equations of flexible body, undulating motions of backbone were defined using a prescribed continuous function. Although the flexible motion mechanism controls the fish swimming but no structural...