Sharif Digital Repository

ZnO/gC 3 N 4 hybrid nanofibers containing different concentrations of gC 3 N 4 nanosheets were prepared using electrospinning technique; this was followed by annealing at 460 forC for one hour in a box furnace. Based on scanning electron microscopy (SEM) image analysis, the mean diameter of the nanofibers was measured to be ~ 55 nm. Fourier transform infrared (FTIR) spectroscopy confirmed the presence of ZnO and gC 3 N 4 in the prepared nanofibers. The photocatalytic activity of the nanofibers was examined under UV photoirradiation, showing that the ZCN0.5 nanofibers containing 0.5 wt% of gC 3 N 4exhibited the highest performance, as compared to other photocatalysts. The observed improvement... 

The Multi-walled carbon nanotube (MWCNT)/WO3 nanocomposite thin films with different MWCNT's weight percentages were prepared by sol-gel method as visible light induced photoanode in water splitting reaction. Weight percentage of MWCNT in the all nanocomposite thin films was confirmed by TGA/DSC analysis. According to XPS analysis, oxygenated groups at the surface of the MWCNT and stoichiometric formation of WO3 thin films were determined, while the crystalline structure of the nanocomposite samples was studied by XRD indicating (0 0 2) peak of MWCNT in the monoclinic phase of WO3. The influence of different weight percentage (wt%) of MWCNT on WO3 photoactivity showed that the electron... 

Energy and environment crises motivated scientists to develop sustainable, renewable, and clean energy resources mainly based on solar hydrogen. For this purpose, one main challenge is the low cost flexible substrates for designing earth abundant efficient cocatalysts to reduce required water oxidation overpotential. Here, a systematic morphological and electrochemical study has been reported for cobalt oxide/hydroxide nanoflakes simply electrodeposited on four different commercially available substrates, titanium, copper sheet, steel mesh, and nickel foam. Remarkable dependence between the used substrate, morphology, and electrocatalytic properties of nanoflakes introduced flexible porous... 

TiO2/ZnO and ZnO/TiO2 nanolayer thin films were synthesized using sol-gel method. Optical analysis revealed high transmittance of the films in the visible range with almost the same bandgap energy for the both systems. XPS technique shows stoichiometric formation of TiO2 and ZnO on the surface of TiO2/ZnO and ZnO/TiO2 layers, respectively. According to AFM observations and its data analysis, the TiO2/ZnO films exhibited a higher surface roughness and more effective interfaces with electrolyte during redox reactions. Based on photoelectrochemical measurements, TiO2/ZnO nanolayer photoanode possesses a lower charge transfer resistance and higher transient time for charge carriers (e- and h+)... 

In this study, the effects of TiO2 addition on the physical and photoelectrochemical properties of ZnO thin films have been investigated. The (TiO2)x-(ZnO)1-x nanocomposite thin films were dip-coated on both glass and indium tin oxide (ITO)-coated conducting glass substrates with various values of x, specifically 0, 0.05, 0.1, 0.25 and 0.5. Optical properties of the samples were studied by UV-vis spectrophotometry in the range of 300-1100 nm. The optical spectra of the nanocomposite thin films showed high transparency in the visible region. The optical bandgap energy of the (TiO2)x-(ZnO)1-x films increased slightly with increasing values of x. The crystalline structure of the nanocomposite... 

In this study, pure TiO2 and Au:TiO2 nanocomposite thin films are both synthesized using sol-gel and RF reactive co-sputtering methods. Physical and photoelectrochemical properties of the thin films deposited by each method are compared. The optical density spectra and scanning electron microscopy images of the Au:TiO2 films reveal formation of gold nanoparticles in the all nanocomposite films synthesized by two methods. Moreover, the optical bandgap energy of the thin films decreases with addition of Au nanoparticles. X-ray photoelectron spectroscopy indicates that the presence of gold in metallic state and the formation of TiO2 is stoichiometric. The photoelectrochemical properties of the... 

In this investigation, the effect of annealing temperature and concentration of gold nanoparticles on the photoelectrochemical properties of sol-gel deposited Au : TiO2 nanocomposite thin films is studied. Various gold concentrations have been added to the TiO2 thin films and their properties are compared. All the deposited samples are annealed at different temperatures. The optical density spectra of the films show the formation of gold nanoparticles in the films. The optical bandgap energy of the Au : TiO2 films decreases with increasing Au concentration. The crystalline structure of the nanocomposite films is studied by x-ray diffractometry indicating the formation of gold nanocrystals in... 

Due to rapid population growth, industrialization, and urbanization, both discharged wastewaters are rich in various pollutants, and energy crises are two of the world's leading challenges. Simultaneous photocatalysis to produce H2 from wastewater treatment is a promising approach for addressing both global environmental and energy problems at the same time. As a step toward achieving this goal, designing visible-light-active photocatalysts has been an appealing approach in dual-functional photocatalytic reactions via heterojunction formation and cocatalyst utilization. In this study, organic pollutants, namely dyes, drugs, and biomass, will be examined to produce hydrogen from these... 

Oil viscosity plays a key role in reservoir simulation and production forecasting, as well as planning thermal enhanced oil recovery methods and these make its accurate determination necessary. In this communication, the most frequently used oil viscosity correlations are evaluated using a large databank of Iranian oil reservoirs which were measured using a Rolling Ball viscometer (Ruska, series 1602). To evaluate the performance and accuracy of these correlations, statistical and graphical error analyses have been used simultaneously. Three of the most accurate correlations for each region, including dead oil viscosity, viscosity below bubble point, viscosity at bubble point and the... 

NiAl-TiC composites were synthesised by volume combustion (VC) method from elemental powders to improve the mechanical properties and high temperature performance of nickel aluminide. Synthesised specimens with porous nature were characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) analysis. XRD results showed that NiAl was dominant phase and other phases like Al 3 Ni 2 (in NiAl + 5 wt-% TiC, NiAl + 10 wt-% TiC specimens) and AlNi 3 (in equimolar NiAl-TiC) were present in specimens. Synthesised specimens of NiAl, NiAl + 5 wt-% TiC, NiAl + 10 wt-% TiC, NiAl + 15 wt-% TiC and equimolar NiAl-TiC achieved Vickers... 

Spherical nano-microcarriers generally perform targeted delivery of drugs to blood vessels with lesions. Recently, some studies have shown the importance of the non-spherical nature of nano-microcarriers in their movement toward the target wall inside blood arteries. Non-spherical particles tend to collide and adhere to the target wall due to their high interaction level with the artery wall. However, detailed kinematic studies have yet to be carried out to optimize nano-microcarriers’ shape based on their delivery rate to the target wall inside the artery. In addition, it is important to note that the flow of fluid in vessels can have diverse patterns that may affect the movement of drug... 

A series of reduced graphene oxide/ZnxCd1-xS (RGO/ZnxCd1-xS) nanocomposites (0 < x < 1) with different ratios of Zn/Cd were synthesized via a facile hydrothermal route under optimized experimental conditions and were carefully characterized by various techniques. Because very little is known about the morphology, specific surface area, and crystal phase effects of RGO/ZnxCd1-xS crystals on their photoresponsivity, field-emission scanning electron microscopy (FE-SEM), BET surface area analysis and X-ray diffraction (XRD) data were studied to investigate their effects on photoactivity. Based on the results, a crystal phase transition from a cubic phase in RGO/Zn0.9Cd0.1S to a hexagonal... 

Supercapacitors store charge by ion adsorption or fast redox reactions on the surface of porous materials. One of the bottlenecks in this field is the development of biocompatible and high-rate supercapacitor devices by scalable fabrication processes. Herein, a Ti-rich anatase TiO2 material that addresses the above-mentioned challenges is reported. Tubular nanolettuces were fabricated by a cost-effective and fast anodization process of Ti foil. They attained a large potential window of 2.5 V in a neutral electrolyte owing to the high activation energy for water splitting of the (1 0 1) facet. Aqueous and all-solid-state devices showed diffusion time constants of 46 and 1700 ms, as well as... 

Providing solar hydrogen as a clean energy resource is one of the human challenges for future. Controlling oxygen vacancies as well as surface morphology in metal oxide semiconductors enables developing PEC H2production in some understood ways. Here, the influence of simple change in annealing atmosphere, air and pure oxygen, on photoresponse of nanocrystalline WO3has been studied completely. Results revealed that such slight change in annealing procedure increases effective surface interface and donor density by 77 and 72%, respectively. These effects and also retarding recombination of photogenerated electro-hole pair resulted in photocurrent enhancement under solar like illumination more... 

Due to the limited resources of fossil fuels, energy supply–demand management and planning especially in the supply-side of the energy system have increasingly become very important. This article assesses Iran’s energy system in order to find the main causes of the considerably high energy intensity in the country compared with similar economies in size and production. Accordingly, fundamental policies and strategies are proposed in order to manage the recognized bottlenecks. The conclusions suggest strongly that not only the fossil-based energy system, but also incompatible patterns of production and consumption in the reference energy system as well as the use of conventional technologies... 

Global environmental pollution and energy supply demand have been regarded as important concerns in recent years. Metal oxide semiconductor photocatalysts is a promising approach to apply environmental remediation as well as fuel generation from water splitting and carbon dioxide reduction. ZnO nanostructures have been shown promising photocatalytic activities due to their non-toxic, inexpensive, and highly efficient nature. However, its wide band gap hinders photo-excitation for practical photocatalytic applications under solar light as an abundant, clean and safe energy source. To overcome this barrier, many strategies have been developed in the last decade to apply ZnO nanostructured... 

Graphitic carbon nitride (g-C3N4) is a metal-free conjugated polymer constructed from two-dimensional sheets with a bandgap energy of 2.7 eV, which makes it an applicable and efficient visible-active photocatalyst for H2 production. In the present study, the basic concepts and principles of photocatalytic water splitting have been discussed, and a guide for the selection of appropriate photocatalysts, focusing on the g-C3N4 nanomaterials, has been proposed. Our approach is mainly concentrated on evaluating two factors, namely the solar-to-hydrogen (STH) conversion and apparent quantum yield (AQY) for different photocatalysts, to provide an in-depth analysis and a framework for solar H2... 

In this study, UV‐Vis-NIR photodetectors based on decorated ZnO nanofibers (NFs) with optimized coverage of Au nanoparticles (NPs) fabricated via combined simple electrospinning and sputtering techniques are introduced. The effect of different coverages of Au NPs resulted from different Au nominal layer thicknesses on the morphology and optical properties of the ZnO fibers are investigated through various characterization methods. It is discovered that 4 nm Au nominal thickness provides the highest UV on/off ratio (~460), responsivity (~332 A/W), detectivity (~2.93×10 11 Jones) as well as faster rise and decay times as compared to pure ZnO nanofibers. A broad spectral response from UV to NIR... 

Semiconductor-based photocatalysis is an efficient approach for degradation of organic pollutants. In this context, ZnO/g-C3N4 composite nanofibers containing carbonaceous species with different concentrations of g-C3N4 nanosheets (x = 0.25, 0.5, 1, 2, 10 wt%) noted as ZnO/carbon/(x wt%) g-C3N4 are prepared by electrospinning technique. For preparation of the composite nanofibers, bulk g-C3N4 is exfoliated to nanosheets, and then it is mixed with polyvinyl alcohol and appropriate zinc acetate content followed by electrospinning process. Thermal annealing of the as spun zinc acetate/poly(vinyl alcohol)/g-C3N4 nanosheets sample under N2 atmosphere leads to the formation of carbonaceous species... 

Viscosity of crude oil is a fundamental factor in simulating reservoirs, forecasting production as well as planning thermal enhanced oil recovery methods which make its accurate determination necessary. Experimental determination of reservoir oil viscosity is costly and time consuming. Hence, searching for quick and accurate determination of reservoir oil viscosity is inevitable. The objective of this study is to present a reliable, and predictive model namely, Least-Squares Support Vector Machine (LSSVM) to predict reservoir oil viscosity. To this end, three LSSVM models have been developed for prediction of reservoir oil viscosity in the three regions including, under-saturated, saturated...