Sharif Digital Repository

Given the growth of the world's population along with the increase in the percentage of urban population by 2050, the way of responding to food consumption will change in the future. Controlled Environment Agriculture will largely account for future food supply. Vertical Farming is one of these systems. But despite the efficiency of these systems in terms of land and water and also not being affected by weather conditions, the main challenge in these systems is the consumption of energy use per unit of crop production. The cost of energy is about 25 to 40 percent of the total costs. The purpose of this study is to develop an integrated dynamic model for the determination of vertical farm... 

Viewpoints of various interest groups should be addressed in any public service appraisal. Urban public transportation development and services have diverse impacts on users, operators and the community. The impacts can be characterized by a wide range of perspectives including: efficiency, effectiveness, efficacy, economic, social and environmental dimensions. Deployment of quantitative techniques, such as multicriteria decision making methods, would facilitate such a multidimensional analysis and appraisal. The objective of the study summarized herein was to shed some light on the perceived attributes pertinent to the Tehran regular transit service appraisal. The major services include... 

The goal of this research is to study the effect of local microcracking due to step by step pressure loading on the durability properties of geopolymer concrete. To better understand the behavior of GGBS-based GPC under different pressure stress levels, some experiments such as water permeability and water absorption conducted on the samples at each state of damage. Also, non-destructive tests such as ultrasonic waveform and pulse velocity (UPV) was used to quantify the extent of damage at each step. GGBFS and a blend of sodium silicate solution and 10 molar sodium hydroxide solution with SSSH⁄ ratio of 2 were used for production of GPC samples. GPC, OGPC and OPC samples with water to binder... 

Resolvers, due to their robust structure, are widely used in automation systems. Among the types of resolvers, the accuracy of the Wound Rotor (WR) resolver in the occurrence of common mechanical errors is higher than other types of resolvers. therefore, in this thesis, an AFWRR is studied to improve the performance. Increasing the number of poles in WR resolvers is a good solution for increasing the accuracy of these electromagnetic position sensors. However, high-speed WR resolvers due to employing fractional slot windings suffer from rich sub-harmonics in the induced voltages. A common solution for suppressing the undesirable sub-harmonics is using multi-layer winding with appropriate... 

Washing a dead person’s body and dressing the corpse prior to burial is an act of love and necessity in many religions. Since the deceased loses all bodily functions at time of death, cleaning the body to eliminate odors is generally a hard and unpleasant task for many to perform. It has also been reported that tens of thousands of microbes are present on every square centimeter of a human corpse which is always a health risk to the persons performing the task. Among Islamic nations, preparation of the corpse is usually carried out in washing rooms (Ghassalkhaneh) of cemeteries in large cities. This preparation consists of two important operations namely as washing of the corpse (Ghosl)... 

Inventory control has been always considered important due to its prominent role in managing and better application of resources in the field of operational systems. Ordering system or review stock policy in supply chain management can be mentioned as one of the inventory control study fields of management. A lot of researches have been done in investigating ordering system in supply chain under certainty conditions; however, since the real world is full of uncertainties, parameters such as demand cannot be predicted exactly and we encounter with ambiguity. In this case, using crisp (exact) values can cause to decide wrongly (a wrong decision). On the other hand, due to absence of sufficient... 

Control of many mechanical systems such as satellites lies on the control of space robots. Control of space robots has many theoric complexities because of the presence of non-holonomic constraints due to angular momentum conservation. Unlike fixed-base robots, any movement of space robots manipulator has a reaction on the robot base and moves it. Thus manipulator’s movement toward desired configuration rotates the robot base and as a result appropriate attitude may not be attained. Therefore an appropriate path is required to achieve the desired configuration and the base attitude reaches its desired value. In this thesis, first the dynamic of space robots and the interaction between the... 

This thesis proposes two methods for backtesting VaR models. The first is the combination of saddlepoint technique with Berkowitz backtesting and the second is based on maximum loss which uses Fischer-Tippet theorem to backtest VaR models. Monte Carlo simulation studies show that the power of these new backtests, especially the latter which is easy to use, is not less than complex Backtests that are well-known for their accuracy  

Using accelerators inside high speed servers can reduce execution time of applications and total power usage of the system. Sharing accelerator between virtual machines of a server decrease both cost and power, however it won’t provide the gained speedup of using dedicated accelerator for each virtual machines. Creation of an appropriate set of accelerators required for virtual machines, management of accesses to the accelerator, prioritizing and scheduling of requests and reconfiguration type of accelerator are the most important challenges that this project has been dealt with. The main objective of this project is implementing the necessary infrastructure to share an FPGA-based... 

In recent years world countries faced with the ageing aircraft fleet problem which increased the repair and maintenance costs of these aircrafts. The non-destructive inspection methods are common inspection methods of old aircrafts. To do this, the aircraft must test with a certain time scheduled inspection programme in a hangar. This method not only increased the repair and maintenance costs but also affects the flight schedule. To overcome this problem, the structural health monitoring can use to online monitoring the structure and when it needs for repair, the aircraft send to hanger. So, repair and maintenance costs minimize while the flight schedule less affected. One of the structural... 

Laboratory studies to investigate the effects of different saline concentrations (such as sodium chloride or calcium chloride) on the soil water retention behavior of clayey soils and their volumetric changes have received much attention recently. However, many previous studies have investigated these effects in only one path of the SWRC (wetting or drying path) and the effects of saline concentration on hydraulic hysteresis have not been considered. In addition, researchers have frequently studied these effects on SWRC on clay samples, and little research has been done on collapsible soils. Therefore, the most important purpose of this study is to investigate the effects of increasing... 

Level crossing sampling is a sampling method in which a sample is taken whenever signal crosses predefined and specific levels. In this dissertation, some recommendations are made in order to increase the sampler’s performance in the sampling, data compression, and reconstruction stages.The IMATMirror algorithm is introduced in the sample reconstruction stage. This algorithm is derived from the IMAT reconstruction method. However, additional data processing is done in each iteration, causing the reconstructed signal to satisfy some properties of the Level-Crossing samples.In order to solve the problem of level crossing sampling of extremely bursty signals (ECG signals for example), a sampler... 

Fretting fatigue occurs at the point of contact of two parts that are under dynamic loading. During this phenomenon, due to the force applied at the contact point, deformation occurs and causes slip-stick zones, which intensifies the effect of surface degradation and crack nucleation happens earlier. In this research, the improvement of fretting fatigue life under combined loading by induction of compressive residual stresses by laser pinning process in the sample has been investigated. The laser shock peening process is a method by which residual stress is created in the sample and can improve fatigue life. The material used is 316L stainless steel, which has many industrial applications....