Sharif Digital Repository

The effect of the corona wind on the natural convection at a rectangular channel was investigated experimentally. The results indicate that the natural convection in the absence of electric/corona wind at obtuse angles outperforms than acute angles and keeps improving by increasing the angle. However, the efficiency of the electric/corona wind at acute angles is higher than obtuse angles. Generally, in the presence of electric/corona wind, heat transfer coefficient was increased. The effect of the electric/corona wind was decreased by raising heat flux. This mainly stems from the fact that the temperature gradient raises the thermal boundary layer and reduces the secondary flow power.... 

Zeolite-based Ag/AgBr and Ag/AgBr/TiO 2 photocatalysts were prepared by sol-gel and deposition methods and were characterized. Their photocatalytic activities were evaluated by inactivation of Escherichia (E.) coli and the photodegradation of Acid Blue 92 and potassium permanganate. The composites containing Ag/AgBr showed the antibacterial activity in the dark by releasing Ag ions into the medium. The results for inactivation of E. coli indicated that Ag/AgBr/TiO 2 modified photocatalyst had better antibacterial activity than Ag/AgBr/zeolite, while zeolite and TiO 2/zeolite did not show any antibacterial activity under visible light and dark conditions. Photodecolarization rate was affected... 

Due to the avascular nature of articular cartilage, damaged tissue has little capacity for spontaneous healing. Three-dimensional scaffolds have potential for use in tissue engineering approach for cartilage repair. In this study, bovine cartilage tissue was decellularized and chemically crosslinked hybrid chitosan/extracellular matrix (ECM) scaffolds were fabricated with different ECM weight ratios by simple freeze drying method. Various properties of chitosan/ECM scaffolds such as microstructure, mechanical strength, swelling ratio, and biodegradability rate were investigated to confirm improved structural and biological characteristics of chitosan scaffolds in the presence of ECM. The... 

Separation of particles or cells has various applications in biotechnology, pharmaceutical and chemical industry. Inertial cell separation, in particular, has been gaining a great attention in the recent years since it has exhibited a label-free, high-throughput and efficient performance. In this work, first, an inertial contraction–expansion array microchannel device, capable of passively separating two particles with diameters of 4 and 10 μm, was numerically studied. Then, the validated model was combined with curved geometries in order to investigate the effect of curve features on the separation process. The overall purpose was to investigate the interaction between the two different... 

The widespread growth of Big Data and the evolution of Internet of Things (IoT) technologies enable cities to obtain valuable intelligence from a large amount of real-time produced data. In a Smart City, various IoT devices generate streams of data continuously which need to be analyzed within a short period of time; using some Big Data technique. Distributed stream processing frameworks (DSPFs) have the capacity to handle real-time data processing for Smart Cities. In this paper, we examine the applicability of employing distributed stream processing frameworks at the data processing layer of Smart City and appraising the current state of their adoption and maturity among the IoT... 

This paper proposes a multi-objective optimum approach for the participation of the propulsion system in mitigating the All-Electric Ship (AES) power system fluctuations. This strategy optimally balances the propellers torque/speed change and the energy storages charge/discharge rate to obtain an economically-efficient operating point. The method aims to minimize the propeller mechanical fatigue and the battery loss of life (LoL) according to their investment costs, while other operational constraints are considered. For this purpose, a novel index, called the Propulsion System Cooperation Coefficient (PSCC), is developed. This index adjusts the magnitude of the propeller speed/torque... 

In this paper, we divide a wide frequency range into multiple subbands and in each subband detect whether in a primary user (PU) is active or not. We assume that PU signal at each subband and the additive noise are white zeromean independent Gaussian random processes with unknown variances. We also assume that at least a minimum given number of subbands is vacant of PU signal and propose an invariant Generalized Likelihood Ratio (GLR) detector. The concept of the grouping of subbands allows faster spectrum sensing of a subset of subbands which may be occupied by a specific PU. Also, we evaluate trade-offs involved in the proposed algorithms by simulation. © 2009 IEEE  

The spectrum sensing of a wideband frequency range is studied by dividing it into multiple subbands. It is assumed that in each subband either a primary user (PU) is active or absent in a additive white Gaussian noise environment with an unknown variance. It is also assumed that at least a minimum given number of subbands are vacant of PUs. In this multiple interrelated hypothesis testing problem, the noise variance is estimated and a generalised likelihood ratio detector is proposed to identify possible spectrum holes at a secondary user (SU). Provided that it is known that a specific PU can occupy a subset of subbands simultaneously, a grouping algorithm which allows faster spectrum... 

Zeolite-based Ag/AgBr and Ag/AgBr/TiO2 photocatalysts were prepared by sol–gel and deposition methods and were characterized. Their photocatalytic activities were evaluated by inactivation of Escherichia (E.) coli and the photodegradation of Acid Blue 92 and potassium permanganate. The composites containing Ag/AgBr showed the antibacterial activity in the dark by releasing Ag+ ions into the medium. The results for inactivation of E. coli indicated that Ag/AgBr/TiO2 modified photocatalyst had better antibacterial activity than Ag/AgBr/zeolite, while zeolite and TiO2/zeolite did not show any antibacterial activity under visible light and dark conditions. Photodecolarization rate was affected... 

In this paper, vehicle longitudinal velocity during the braking process is estimated by measuring the wheels speed. Here, a new algorithm based on the unknown input Kalman filter is developed to estimate the vehicle longitudinal velocity with a minimum mean square error and without using the value of braking torque in the estimation procedure. The stability and convergence of the filter are analysed and proved. Effectiveness of the method is shown by designing a real experiment and comparing the estimation result with actual longitudinal velocity computing from a three-axis accelerometer output  

In this paper, a novel structure for a dual-gated graphene nanoribbon field-effect transistor (GNRFET) is offered, which combines the advantages of high and low dielectric constants. In the proposed Two Different Insulators GNRFET (TDI-GNRFET), the gate dielectric at the drain side is a material with low dielectric constant to form smaller capacitances, while in the source side, there is a material with high dielectric constant to improve On-current and reduce the leakage current. Simulations are performed based on self-consistent solutions of the Poisson equation coupled with Non-Equilibrium Green's Function (NEGF) formalism in the ballistic regime. We assume a tight-binding Hamiltonian in... 

Despite the advantages of employing an electric propulsion system in All-Electric Ships (AES), additional power fluctuation sources have emerged in the ship power system as a result. Since the propellers are the primary power consumers in the AES, these fluctuations may significantly affect its power system power quality. Thus, for optimal performance of the ship power system, these fluctuations need to be rigorously investigated at the design level of vessels. Waves collision is one of the critical conditions where propellers inject power fluctuations into the ship power system. Therefore, a comprehensive model is essential to analyze the propellers in-and-out-of-water effect on the ship... 

In recent years, utilizing the electrical propulsion system in the marine industry has become widely popular. Control of the propeller has been a high-priority design challenge in this industry. One of the essential issues in propeller control is the speed control of the ships. A suitable control strategy for the propeller should be economically-efficient while ensuring stability, reliability, and power quality of the ship's power system. This article proposes an improved propeller control strategy for increasing/decreasing the ship's speed. This scheme consists of two strategies: a maximum acceleration strategy and an efficient operation strategy. The maximum acceleration strategy aims to... 

Ship motions affect the propulsion system, which causes fluctuations in the power system. Mutually, the power system variations impact the ship velocity by generating speed changes in the propeller. Therefore, interconnecting the ship hydrodynamic and power system has paramount importance in designing and analysing an all-electric ship (AES). The lack of an integrated model that can be evaluated in various operating conditions, such as manoeuvring, is evident. This paper explores the required perceptions for the power system and hydrodynamic analysis of an AES. Then, an integrated theoretical model comprising both the ship motion and power system is proposed. In addition to providing an... 

This article proposes two novel power management strategies (PMSs) to enhance the electrical power quality in twin-screw all-electric ships (AESs) during vessel-wave encountering. Soothing PMS (SPMS) focuses on mitigating power fluctuations of the propulsion system since it has significant impacts on the power system in extreme conditions. For this purpose, the PMS modifies propellers' speed based on the in-and-out-of-water effect loss factor (LF) in wave collisions. This method does not require typical equipment, such as energy storage systems (ESSs), to moderate the variations. Hence, it decreases the ESS demand capacity and maintenance costs at the design and operation levels. An... 

Waves encountering can cause significant ship motions and affect the photovoltaic power generation capacity in All-Electric Ships (AES) during extreme conditions. In this paper, a comprehensive strategy is proposed to examine the impact of modern vessels' movements on the PV system output and the ship power quality during various operating scenarios. The proposed theoretical model-based technique determines ship angles in a wave collision and assesses sun-related angles concerning the vessel motions. Based on the panel angles, the solar irradiance and the PV system power variations can be derived. The developed method can simultaneously evaluate the effect of ship motions on the photovoltaic... 

In the most popular distributed stream processing frameworks (DSPFs), programs are modeled as a directed acyclic graph. Using this model, a DSPF can benefit from the parallelism capabilities of distributed clusters. Choosing a reasonable number of vertices for each operator and mapping the vertices to the appropriate processing resources significantly affect the overall system performance. Due to the simplicity of the current DSPF schedulers, these frameworks perform poorly on large-scale clusters. In this paper, we present a heterogeneity-aware scheduling algorithm that finds the proper number of the vertices of an application graph and maps them to the most suitable cluster node. We begin... 

Time domain analysis of multilayer graphene nano ribbon (MLGNR) interconnects, based on transmission line modeling (TLM) using a six-order linear parametric expression, has been presented for the first time. We have studied the effects of interconnect geometry along with its contact resistance on its step response and Nyquist stability. It is shown that by increasing interconnects dimensions their propagation delays are increased and accordingly the system becomes relatively more stable. In addition, we have compared time responses and Nyquist stabilities of MLGNR and SWCNT bundle interconnects, with the same external dimensions. The results show that under the same conditions, the...