Loading...
Search for:
nategh--s
0.109 seconds
Total 11001 records
Dislocation network formation during creep in Ni-base superalloy GTD-111
, Article Materials Science and Engineering A ; Volume 339, Issue 1-2 , 2003 , Pages 103-108 ; 09215093 (ISSN) ; Sajjadi, S. A ; Sharif University of Technology
2003
Abstract
The Ni-base superalloy GTD-111 is used as a blading material in the first stage blades of high power gas turbines. The creep-rupture properties of the cast superalloy were studied over a wide range of temperatures and stresses. The observations of dislocation structures during steady-state creep confirmed that the creep mechanism was different in the high and low stress regions. The results showed that in the high stress region, shear mechanisms including stacking fault formation and anti-phase boundary creation were operative and in the low stress region, a by-passing mechanism occurred by either looping or dislocation climb and glide. With increasing exposure time in the high-temperature...
Microstructural evaluation and fracture mechanisms of failed IN-738LC gas turbine blades
, Article Case Studies in Engineering Failure Analysis ; Volume 1, Issue 2 , April , 2013 , Pages 85-94 ; 22132902 (ISSN) ; Khoshmanesh, R ; Nategh, S ; Davami, P ; Sharif University of Technology
2013
Effect of preweld microstructure on HAZ liquation cracking of rene 80 superalloy
, Article Materials Science and Technology ; Volume 23, Issue 5 , 2007 , Pages 547-555 ; 02670836 (ISSN) ; Kokabi, A. H ; Nategh, S ; Sharif University of Technology
2007
Abstract
The objective of this work was to study the microstructure of as cast, solution treated and overaged Rene 80 superalloy before and after welding treatment. Studies focused on identifying heat affected zone (HAZ) liquation cracking mechanism and the effect of preweld microstructure on it. The formation of HAZ liquation cracking or microfissuring is found to be strongly dependent on constitutional liquation of grain boundary precipitates. These liquated precipitates in the as cast state contain MC carbides and particularly γ/γ' eutectic islands. While in the overaged condition they consist of the MC carbides and borides. Also HAZ grain boundary liquation and subsequent resolidification occur...
Influence of filler wire and wire feed speed on metallurgical and mechanical properties of MIG welding–brazing of automotive galvanized steel/5754 aluminum alloy in a lap joint configuration
, Article International Journal of Advanced Manufacturing Technology ; Volume 82, Issue 9-12 , 2016 , Pages 1495-1506 ; 02683768 (ISSN) ; Paidar, M ; Khodabandeh, A ; Nategh, S ; Sharif University of Technology
Springer-Verlag London Ltd
2016
Abstract
In this research, the galvanized steel with thickness of 2 mm was joined to the 5754 aluminum alloy with thickness of 3 mm by the cold metal transfer MIG welding–brazing process. The effect of the filler wires (AlSi3Mn, AlSi5, and AlSi12) and wire feed speeds (4.7, 5, and 5.3 m/min) on metallurgical and mechanical properties have been discussed. According to the experimental results, thickness of intermetallic compound (IMC) layer which was formed along the interface during the MIG welding–brazing was varied by changing of parameters. In addition, the results indicated that by increasing of the wire feed speed, the thickness of IMC layer at first decreased and then increased. Results...
Zero-sum Flows in Graphs
,
M.Sc. Thesis
Sharif University of Technology
;
Akbari, Saeed
(Supervisor)
Abstract
For an undirected graph G, a zero-sum flow is an assignment of non-zero real numbers on the edges of G such that the total sum of all edges incident with any vertex of G is zero. A zero-sum k-flow for a graph G is a zero-sum flow with labels from the set {±1, . . . , ±(k ? 1)}. In this thesis for a graph G, a necessary and sufficient condition forthe existence of zero-sum flow is given. It has been conjectured that if a graph G has azero-sumflow, then it has a zero-sum 6-flow. Also, it has been proved that this conjectureand Bouchet’s Conjecture for bidirected graphs are equivalent. It is shown that the con-jecture is true for 2-edge connected bipartite graphs, and every r-regular graph...
Research on Influences of Coating on Low Cycle Fatigue Properties of Ni-Base Superalloy René 80
, Ph.D. Dissertation Sharif University of Technology ; Nategh, Saeed (Supervisor)
Abstract
In this thesis, based on the taking-off and landing of aircraft with GE 21-J85 turbine, the low cycle fatigue (LCF) test for superalloy used in first stage blades is considered. The LCF tests were performed on both coated and uncoated Rene 80 which are used in GE 21-J85 turbine at R = (min/max) = 0, strain rate of 2 10-3 s-1 and 760oC, 871oC and 982oC. To produce specimens, an investment casting method was used so that adequate amount of polycrystalline round bars could be obtained. The specimens were all homogenized and solution treated. After the inspection, some specimens were coated with pack cementation method in CODEP-B powder in H2 atmosphere. The coated and uncoated specimens all...
Morphological features of silicon rich phase in powder thixoformed spray atomized hyper-eutectic Al-Si alloy
, Article Semi-Solid Processing of Alloys and Composites 10 - Selected, peer reviewed papers from the 10th International Conference on Semi-Solid Processing of Alloy and Composites, S2P 2008, Aachen, 16 September 2008 through 18 September 2008 ; Volume 141-143 , 2008 , Pages 493-498 ; 10120394 (ISSN); 9771012039401 (ISBN) ; Aashuri, H ; Nategh, S ; Foroughi, A ; Narimannezhad, A ; Khosravani, A ; Sharif University of Technology
Trans Tech Publications Ltd
2008
Abstract
Microstructural evolution of the spray atomized and powder thixoformed hyper-eutectic A390 aluminum alloy was investigated. The spray atomized powder revealed homogeneous and very fine silicon particles distribution, due to the rapid solidification of the alloy. The semi-solid powders were extruded into a closed die cavity through a hole for the plastic deformation of the powder particles. A drop forge of 45kg weight at different heights was used in this investigation. Remarkable rearrangement and growth of the silicon rich phase was revealed in the final stage
Join of two graphs admits a nowhere-zero 3-flow
, Article Czechoslovak Mathematical Journal ; Vol. 64, Issue. 2 , 2014 , pp. 433-446 ; ISSN: 00114642 ; Aliakbarpour, M ; Ghanbari, N ; Nategh, E ; Shahmohamad, H ; Sharif University of Technology
2014
Abstract
Let G be a graph, and λ the smallest integer for which G has a nowherezero λ-flow, i.e., an integer λ for which G admits a nowhere-zero λ-flow, but it does not admit a (λ − 1)-flow. We denote the minimum flow number of G by Λ(G). In this paper we show that if G and H are two arbitrary graphs and G has no isolated vertex, then Λ(G ∨ H) ⩽ 3 except two cases: (i) One of the graphs G and H is K2 and the other is 1-regular. (ii) H = K1 and G is a graph with at least one isolated vertex or a component whose every block is an odd cycle. Among other results, we prove that for every two graphs G and H with at least 4 vertices, Λ(G ∨ H) ⩽ 3
Influence of Rejuvenation Treatment on Microstructure and Creep Properties of Damaged IN738LC Superalloy
, Ph.D. Dissertation Sharif University of Technology ; Nategh, Saeed (Supervisor) ; Ekrami, Ali Akbar (Supervisor)
Abstract
The goal of the present study is to investigate the effect of rejuvenation treatment on microstructure and creep properties of damaged IN738LC superalloy. Virgin alloy was damaged by interrupted creep tests at 926°C and 170 MPa for 100, 200 and 250 hours. The results obtained showed that damaging the virgin alloy by interrupted creep tests resulted in microstructural deterioration (consisting of coarsening of ' precipitates, formation of continuous films of ' on grain boundary regions and formation of transition zone around MC carbides) and, consequently, degradation of creep properties. Rejuvenation treatment was carried out with the purpose of healing the damaged alloy and restoration of...
The relationship between an EFL teacher's gender and students' willingness to communicate
, Article International Journal of Communication and Linguistic Studies ; Volume 10, Issue 4 , 2013 , Pages 17-29 ; 23277882 (ISSN) ; Pakzadian, S. S
Common Ground Publishing
2013
Abstract
Learning a foreign language encompasses a process of trial and error that can lead to the progression of the learner's interlanguage, meaning that the learners make use of their language knowledge that receives feedback and brings about progress through diagnosis of the problems and being corrected by the teacher. Therefore, there exists a need to analyze the underlying reasons causing the students to remain taciturn with a low willingness to communicate (WTC) during a language class. There has been much work done investigating the role of the learner's stable personal characteristics (traits) along with their situational changes at a specific time (states) that influence the student's...
An automated simple algorithm for realistic pore network extraction from micro-tomography images
, Article Journal of Petroleum Science and Engineering ; Vol. 123, issue , 2014 , pp. 164-171 ; ISSN: 09204105 ; Jamshidi, S ; Salehi, S
2014
Abstract
Using 3-D scanned data to analyze and extract pore network plays a vital role in investigation of porous media's characteristics. In this paper, a new simple method is developed to detect pores and throats for analyzing the connectivity and permeability of the network. This automated method utilizes some of the common and well-known image processing functions which are widely accessible by researchers and this has led to an easy algorithm implementation. In this method, after polishing and quality control of images, using city-block distance function and watershed segmentation algorithm, pores and throats are detected and 3-D network is produced. This method can also be applied on 2-D images...
Discrimination of heart arrhythmias using novel features in heart rate phase space
, Article Computing in Cardiology ; Volume 40 , Sept , 2013 , Pages 1035-1038 ; 23258861 (ISSN); 9781479908844 (ISBN) ; Rezaei, S ; Salavatian, S
2013
Abstract
In this paper, we try to recognize and distinguish different groups of arrhythmia using novel features which have been obtained from the heart rate's phase space in recent years. For this purpose, we used Triangular Phase Space Mapping (TPSM) and Parabolic Phase Space Mapping (PPSM). For recognition, we used three groups of 15 subjects using the Physionet database (Arrhythmia, Congestive Heart Failure (CHF), and Atrial Fibrillation (AF)) with Normal Sinus Rhythm (NSR). The obtained features discriminate arrhythmia from NSR by p
An intelligent hybrid classification algorithm integrating fuzzy rule-based extraction and harmony search optimization: Medical diagnosis applications
, Article Knowledge-Based Systems ; Volume 220 , 2021 ; 09507051 (ISSN) ; Abdullah, S ; Akhavan Niaki, S. T ; Banihashemi, S ; Sharif University of Technology
Elsevier B.V
2021
Abstract
Uncertainty is a critical factor in medical datasets needed to be overcome for increasing diagnosis efficiency. This paper proposes an intelligent classification algorithm comprising a fuzzy rule-based approach, a harmony search (HS) algorithm, and a heuristic algorithm to classify medical datasets intelligently. Two fuzzy approaches, as well as orthogonal and triangular fuzzy sets, are first utilized to define the attributes of data. Then, an HS algorithm is integrated with a heuristic to generate fuzzy rules to select the best rules in the fuzzy rule-based systems. Moreover, to improve the performance of the proposed classification approach, a three-phase parameter tuning approach is...
Performance evaluation of shared hosting security methods
, Article Proc. of the 11th IEEE Int. Conference on Trust, Security and Privacy in Computing and Communications, TrustCom-2012 - 11th IEEE Int. Conference on Ubiquitous Computing and Communications ; 2012 , Pages 1310-1315 ; 9780769547459 (ISBN) ; Arshad, S ; Khoshkdahan, S ; Sharif University of Technology
2012
Abstract
Shared hosting is a kind of web hosting in which multiple websites reside on one webserver. It is cost-effective and makes the administration easier for websites' owners. However, shared hosting has some performance and security issues. In default shared hosting configuration, all websites' scripts are executed under the webserver's user account regardless of their owners. Therefore, a website is able to access other websites' resources. This security problem arises from lack of proper isolation between different websites hosted on the same webserver. In this survey, we have examined different methods for handling mentioned security issue. Also we evaluated the performance of mentioned...
The behaviour of an artificially cemented sandy gravel
, Article Geotechnical and Geological Engineering ; Volume 23, Issue 5 , 2005 , Pages 537-560 ; 09603182 (ISSN) ; Hosseini, S. M ; Toll, D. G ; Yasrebi, S. S ; Sharif University of Technology
2005
Abstract
The major section of the city of Tehran, Iran has been developed on cemented coarse-grained alluvium. This deposit consists of gravely sand to sandy gravel with some cobbles and is dominantly cemented by carbonaceous materials. In order to understand the mechanical behaviour of this soil, a series of undrained triaxial compression tests and unconfined compression tests were performed on uncemented and artificially cemented samples. Portland cement type I was used as the cementation agent for preparing artificially cemented samples. Uncemented samples and lightly cemented samples (1.5% cement) tested at high confining pressure showed contractive behaviour accompanied with positive excess pore...
An imperialist competitive algorithm approach for multi-objective optimization of direct coupling photovoltaic-electrolyzer systems
, Article International Journal of Hydrogen Energy ; Vol. 39, Issue 33 , 11 November , 2014 , pp. 18743-18757 ; ISSN: 03603199 ; Sayedin, F ; Khavas, S. S
2014
Abstract
In the context of sustainable clean hydrogen production pathways, photovoltaic-electrolyzer systems are one of the most promising alternatives for acquiring hydrogen from renewable energy sources. In fact, determining the optimal set of design and operating variables are always a key issue while coupling directly renewable electricity sources to PEM electrolyzers. Few previous studies have attempted to find the optimal size and operational condition of directly coupled photovoltaic-electrolyzer (PV/El) systems in order to maximize the hydrogen production or to minimize energy transfer loss between photovoltaic devices and the electrolyzer. Nevertheless an easy and efficient approach still...
Kalman filter based packet loss replacement in presence of additive noise
, Article 2012 25th IEEE Canadian Conference on Electrical and Computer Engineering: Vision for a Greener Future, CCECE 2012 ; 2012 ; 9781467314336 (ISBN) ; Ghorshi, S ; Tahaei, A
2012
Abstract
A major problem in real-time packet-based communication systems, is misrouted or delayed packets which results in degraded perceived voice quality. If packets are not available on time, the packets are considered as lost. The easiest solution in a network terminal receiver is to replace silence for the duration of lost speech segments. In a high quality communication system, to avoid degradation in speech quality due to packet loss, a suitable method or algorithm is needed to replace the missing segments of speech. In this paper, we introduce an adaptive filter for replacement of lost speech segment. In this method Kalman filter as a state-space based method will be used to predict the...
Investigation of Mesh Sensitivity Influence to Determine Crack Characteristic by Finite Element Methods
, Article Journal of Failure Analysis and Prevention ; Volume 16, Issue 3 , 2016 , Pages 506-512 ; 15477029 (ISSN) ; Mirjavadi, S. S ; Asli, S. A ; Sharif University of Technology
Springer New York LLC
2016
Abstract
In this research, an extended finite element model has been investigated. Investigation of opening and closure stress always has been one of the difficult parameters to analysis of results; therefore, the utilization of finite element methods would be a good and logical alternative for this purpose. In addition, linear elastic fracture criteria are used for validation of numerical results from the simulation. In this work, a detailed analysis of the influence of different parameters in the results of a specific specimen with a semi-elliptical tooling groove in terms of closure and opening stress is presented, and the impact of optimum element size in fracture characteristic in various load...
Investigation of the effect of nanosilica on rheological, thermal, mechanical, structural, and piezoelectric properties of poly(vinylidene fluoride) nanofibers fabricated using an electrospinning technique
, Article Industrial and Engineering Chemistry Research ; Volume 56, Issue 44 , 2017 , Pages 12596-12607 ; 08885885 (ISSN) ; Ahmad Ramazani, S. A ; Talebi, S ; Fattahpour, S ; Hasany, M ; Sharif University of Technology
2017
Abstract
The effects of different nano-SiO2 contents on the rheological properties of poly(vinylidene fluoride) (PVDF) solution and mechanical, thermal, structural, and piezoelectric properties of composite nanofibers were investigated. Results showed an increase in fiber diameter (∼125 to 350 nm) and ∼450% increase in tensile strength as the content of nano-SiO2 particles increased. The degree of crystallinity decreased by 19% as the nano-SiO2 content increased by 2% (w/w). Further investigation demonstrated that silica could significantly improve the piezoelectric properties of PVDF nanofibers as the output voltage showed an increase in the presence of silica attributed to change in the crystalline...
A method for real-time safe navigation in noisy environments
, Article 2013 18th International Conference on Methods and Models in Automation and Robotics, MMAR 2013, Miedzyzdroje ; 2013 , Pages 329-333 ; 9781467355063 (ISBN) ; Kamali, E ; Niknezhad, M. R ; Monfared, S. S. M. S ; Sharif University of Technology
2013
Abstract
The challenge of finding an optimized and reliable path dates back to emersion of mobile robots. Several approaches have been developed that have partially answered this need. Satisfying results in previous implementations has led to an increased utilization of sampling-based motion planning algorithms in recent years, especially in high degrees of freedom (DOF), fast evolving environments. Another advantage of these algorithms is their probabilistic completeness that guarantees delivery of a path in sufficient time, if one exists. On the other hand, sampling based motion planners leave no comment on safety of the planned path. This paper suggests biasing the Rapidly-exploring Random Trees...