Sharif Digital Repository

In the first work, a stable composite film of silver nanoparticles decorated on reduced graphene oxide is easily prepared. The surface morphology of the modified electrode is characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques. The electrochemical behavior of TNZ on the surface of the modified electrode is investigated by using linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS). The prepared modified electrode acts as a highly sensitive platform for the voltammetric determination of tinidazole (TNZ). Voltammetric investigations demonstrated that, in comparison to the glassy carbon electrode individually coated with... 

Photocatalysts are compounds that can perform oxidation and reductions in the presence of light. One of the most known applications for photocatalyst is degrading organic contaminants in wastewater and making them harmless to the environment.In this project, a magnetic photocatalyst based on Fe3O4@ZnO/N-RGO has been synthesized and characterized with FT-IR, FE-SEM and EDS, XRD, and TGA. Moreover, photocatalytic dye degradation reactions for Rhodamine B, Methylene Blue, and Methyl Orange have been investigated and compared in the presence of Fe3O4@ZnO/N-RGO, Fe3O4@ZnO/RGO, Fe3O4@ZnO, and ZnO. Furthermore, the performance of the photocatalyst has been studied for 5 consecutive reactions and... 

Increasing in size and complexity of digital designs has made manufacturing process more complex and enforces more complexity in verification of designs. This makes it essential to address critical verification issues at the early stages of design cycle. Such a complicated designs needs to be tested for fabrication faults as well as functional faults. Several attempts have been made to raise the quality of testing methods with automatic test pattern generation (ATPG) and design for testability (DFT) methods in logic and lower levels. Although these techniques try to increase the testability of a circuit considerably, but there are always some overheads in area, power and performance.... 

Acceptance of new technologies in an industrial field generally takes a long time, and needs accelerators and facilitators to be thoroughly and truly understood, accepted, and then implemented. One of the most useful accelerators is Feasibility Study, which help the specialists to be confident that the whole technical and economic aspects of the issue are considered in an overall view and the technology is totally feasible and beneficial.Managed Pressure Drilling which was introduced as a new technology to drilling industry internationally in 2003 and developed rapidly till now, is one of the most useful technologies in the oil and gas wells drilling industry, and helps the Operator... 

Due to the development of electronics, technology has entered new levels of integration on a single chip, called the System-on-Chip (SoC) design. Currently a SoC may contain various Intellectual Property (IP) cores with different interface protocols. For typical SoC communication, designers implement numerous standards such as Avalon from Altera and AMBA from ARM. These standards have different topologies with their own properties and are suitable for specific applications, But the challengeable problem is testing interconnects between cores. In testing process, important elements of a bus that should be tested are interconnections between cores (wires), multiplexers, arbiters, decoders, and... 

Implementation of various incentive-based demand response strategies has great potential to decrease peak load growth and customer electricity bill cost. Using advanced metering and automatic demand management makes it possible to optimize energy consumption, to reduce grid loss, and to release generation capacities for the sake of providing sustainable electricity supply, and reducing electricity bills for the customers. With these objectives, this thesis examines the previously suggested load scheduling programs in both residential and industrial sectors, and proposes new practical strategies for load management. This thesis has mainly focuses on three subdivisions of load management... 

The main purpose of this thesis is to analyze the total productive maintenance based on computerized maintenance management system. At first, a detailed study on total productive maintenance is performed and then the requirements of this maintenance strategy are specified. Also, a computerized maintenance management system is defined which can help total productive maintenance to reach to its requirements. Finally, a conceptual model and entity-relationship model for computerized maintenance management system data base has been created  

In this thesis, DC transmission of offshore wind farms is studied thoroughly. Various system configurations that are introduced in the literatures are discussed and their control scheme for normal conditions and grid faults are studied. Then, the HVDC transmission based on voltage source converter, located between a local offshore ac grid and the onshore ac system is investigated as the most practical choice. The HVDC linke circuit elements are calculated and the control strategies of the offshore and onshore converters are introduced. DFIGs are considered to be the best choice for the offshore wind turbine generators. Then, the system is simulated and the frequency of the offshore grid is... 

The main aim of this thesis is to develop the technical knowledge of designing and making active ingredients of domestically produced drugs, decreasing the costs, independency in producing these products, and checking outflow of currency. It also aims to reduce the financial challenges of patients who have to pay huge amounts for such drugs. Conducting research in the field of reverse engineering and using its definition, and attempt in made to get knowledge into the stages of product development process, to determine the technical standards associated with each stage, to recognize how knowledge is shared during this process, and to present some methods of establishing the infrastructure... 

Increase in growing concerns over environmental pollution and depletion of fossil fuel resources motivate the need for cleaner energy technologies and stimulate research in facilitating renewable energy systems. In recent years, photovoltaic systems have attracted great attention since they remove the need for energy storage systems and intermediate processess for energy conversion. However, high capital cost, low efficiency and low energy density per area of these systems, as compared with other technologies hinder its industrial use. To surmount these bottlenecks and improve technical performance of PV systems, it is crucial to optimize configuration of convertor connection and to improve... 

One of the main objectives in operating a power system is to maintain the system voltage properly to avoid equipment damage and transfer power efficiently. Automatic control of transmission network voltage provides significant improvements in security, quality and efficiency of power system operation. This thesis investigates coordinated voltage control of power systems in normal, alert and emergency states. The aim is to propose a comprehensive framework for real-time operation of practical power systems, ensuring secure operation of the system in the normal state and after occurrence of sever contingencies.
At the first, a new coordinated voltage control scheme is proposed to ensure... 

Today, organizations are surrounded by basic and continuous changes such as declining organizational resources, reduction of the production cycles, and the need for rapid adaption. Those organizations remain competitive while maintaining their productivity, that have following characteristics: accurately plan and assess their knowledge resources, create and absorb beneficial knowledge, store and organize their knowledge, disseminate knowledge to needed areas, and use knowledge in practice and decision making, to improve their products/services as well as their performance. Therefore, the human capital has been considered as knowledge owners and the most important organizational resource, on... 

Feyarabend’s philosophy of science is against method and rule such that he believes that “anything goes”. However, he sometimes applies the term “progress”. Reviewing his publications shows that from his point of view, progress is qualitative and relative. So, unlike other philosophers of science Feyarabend ignores the clarification of the concept; subsequently, his applications of the term “progress” are somewhat ambiguous. However, by studying his philosophy, one may realize what should be done to achieve progress in any sense. The affirmative aspect of Feyerabend’s philosophy, while highlights the social and ethical elements, considering his humanitarian outlook as well as his special... 

Increasing population and competition for producing various productions and also more consumption in recent decades, result in producing more wastes. Therefore effective and continuous waste management is essential for monitoring the process (from the wastes generation source to the waste disposal) and establishing the efficient strategies to reduce wastes. One of the major sources of waste generation is hospitals that cause lots of environmental problem unless they are managed properly.Recycling is an important element of waste management that can reduce costs by innovative and proper management. The purpose of this research is identification of recyclable plastic items and estimates the... 

Lack of financial sources for production and performing projects has been an effective issue in all governmental and non-governmental organizations. So, using a structure with capability of detecting and forecasting all expenses and costs, and being able to convert the mass of data into useful and instrumental reports for managerial decision such as estimating total cost, selecting the syntax of production and etc is obvious for recourse management of every organization. Among the various components of the cost engineering system, cost management system by recording and allocating cost is an important issue in efficiency of every cost engineering system.In this thesis, Automotive Industrial...