Sharif Digital Repository

In the sleep mode, a Mobile Subscribe Station (MSS) sleeps for a sleep interval and wakes up at the end of this interval in order to check buffered packet(s) at Base Station (BS) destined to it. If there is no packet, the MSS increases the sleep window up to the maximum value or keeps it unchanged and sleeps again. In this paper, we study the effect of presence of multi service connections with different power saving classes (PSCs) on power consumption for IEEE 802.16e nodes while operating in the sleep mode. Using multi service connections may result in overlapping of availability and unavailability intervals and reducing the effectiveness of power saving mode of the subscriber. © 2007 IEEE... 

In oil and gas fields, it is a common practice to flow liquid and gas mixtures through choke valves. In general, different types of primary valves are employed to control pressure and flow rate when the producing well directs the natural gas to the processing equipment. In this case, the valve normally is affected by elevated levels of flow (or velocity) as well as solid materials suspended in the gas phase (e.g., fine sand and other debris). Both surface and subsurface chokes may be installed to regulate flow rates and to protect the porous medium and surface facilities from unusual pressure instabilities.In this study a reliable, novel, computer based predictive model using Least-Squares... 

One of the significant challenges in urbanization is the air pollution. This highlights the need of the green city concept with reconsideration of houses, factories, and traffic in a green viewpoint. The literature review confirms that this reconsideration for green space has a positive effect on the air quality of large cities and to reduce the air pollution. The purpose of this study is to evaluate the annual vegetation changes in the green space of Mashhad, Iran as a very populated city in the middle east to study the air pollution. To investigate the relationship between the air pollution and vegetation, the Landsat 8 satellite images for summer seasons of 2013–2019 were used to extract... 

One of the significant challenges in urbanization is the air pollution. This highlights the need of the green city concept with reconsideration of houses, factories, and traffic in a green viewpoint. The literature review confirms that this reconsideration for green space has a positive effect on the air quality of large cities and to reduce the air pollution. The purpose of this study is to evaluate the annual vegetation changes in the green space of Mashhad, Iran as a very populated city in the middle east to study the air pollution. To investigate the relationship between the air pollution and vegetation, the Landsat 8 satellite images for summer seasons of 2013–2019 were used to extract... 

Controlling evaporation plays an essential role in arid and semi-arid water resources systems where it accounts for a considerable amount of reservoirs outflow. In this study, we have evaluated evaporation reduction efficiency of different kinds of self-assembled nano-thickness films. The films consist of six different combinations of stearyl and cetyl alcohols with additives such as jojoba oil, stearic acid, and calcium hydroxide. The study lasted from July to August and utilized two pairs of class A evaporation pans: one pair was semi-floating on Chitgar lake water surface while the other one was located on the shore. The experimental results showed that a monolayer containing 3:1 stearyl... 

In this paper, we study the effect of non-Poisson traffic patterns on energy consumption for IEEE 802.16e nodes while operating in the sleep mode. In the sleep mode, a Mobile Subscribe Station (MSS) sleeps for a sleep interval and wakes up at the end of this interval in order to check buffered packet(s) at Base Station (BS) destined to it. If there is no packet, the MSS increases the sleep window up to the maximum value and sleeps again. For a more general traffic pattern (rather than Poisson), we evaluate the average power consumption. Based on our analysis, we conclude that traffic pattern plays an important role in power consumption. ©2007 IEEE  

The global COVID-19 pandemic has affected the world’s population by causing changes in behavior, such as social distancing, masking, restricting people’s movement, and evaluating existing medication as potential therapies. Many pre-existing medications such as tocilizumab, ivermectin, colchicine, interferon, and steroids have been evaluated for being repurposed to use for the treatment of COVID-19. None of these agents have been effective except for steroids and, to a lesser degree, tocilizumab. Ivermectin has been one of the suggested repurposed medications which exhibit an in vitro inhibitory activity on SARS-CoV-2 replication. The most recommended dose of ivermectin for the treatment of... 

In this project, the protective effect of Biebersteinia multifida root extract (BMRE) against corrosion of 1018 low carbon steel (1018LCS) in HCl solutions was appraised by assessing weight loss, electrochemical impedance spectroscopy (EIS), and polarization at 25 °C. The maximum inhibitory efficacy for the concentration of 1 g/l of the BMRE was 92.8% at 25 °C after 2 h and increased to 95.3% after 24 h of immersion. Polarization experiments have shown that the extract in acidic solutions can act as a mixed corrosion inhibitor. The corrosion inhibitory efficacy of BMRE decreased with increasing temperature, and at all temperature settings studied, the adsorption of BMRE molecules on 1018 LCS... 

In this paper, we study the effect of some traffic patterns on energy consumption for IEEE 802.16e nodes while operating in the sleep mode. In the sleep mode, a Mobile Subscribe Station (MSS) sleeps for a sleep interval and wakes up at the end of this interval in order to check buffered packet(s) at Base Station (BS) destined to it. If there is no packet, the MSS increases the sleep window up to the maximum value and sleeps again. For a more general traffic pattern, we evaluate the average power consumption. Based on our analysis, we conclude that traffic pattern plays an important role in power consumption. ©2007 IEEE  

A novel intelligent semi-active control system for an eleven degrees of freedom passenger car's suspension system using magnetorheological (MR) damper with neuro-fuzzy (NF) control strategy to enhance desired suspension performance is proposed. In comparison with earlier studies, an improvement in problem modeling is made. The proposed method consists of two parts: a fuzzy control strategy to establish an efficient controller to improve ride comfort and road handling (RCH) and an inverse mapping model to estimate the force needed for a semi-active damper. The fuzzy logic rules are extracted based on Sugeno inference engine. The inverse mapping model is based on an artificial neural network... 

Using CNG as an additive for gasoline is a proper choice due to higher octane number of CNG enriched gasoline with respect to that of gasoline. As a result, it is possible to use gasoline with lower octane number in the engine. This would also mean the increase of compression ratio in SI engines resulting in higher performance and lower gasoline consumption. Over the years, the use of simulation codes to model the thermodynamic cycle of an internal combustion engine have developed tools for more efficient engine designs and fuel combustion. In this study, a thermodynamic cycle simulation of a conventional four-stroke spark-ignition engine has been developed. The model is used to study the... 

With the declining energy resources and increase of pollutant emissions, a great deal of efforts has been focused on the development of alternatives for fossil fuels. One of the promising alternative fuels to gasoline in the internal combustion engine is natural gas [1-5]. The application of natural gas in current internal combustion engines is realistic due to its many benefits. The higher thermal efficiency due to the higher octane value and lower exhaust emissions including CO2 as a result of the lower carbon to hydrogen ratio of the fuel are the two important feature of using CNG as an alternative fuel. It is well known that computer simulation codes are valuable economically as a cost... 

Gaining insight into possible vibratory responses of dynamical systems around their stable equilibria is an essential step, which must be taken before their design and application. The results of such a study can significantly help prevent instability in closed-loop stabilized systems by avoiding the excitation of the system in the neighborhood of its resonance. This paper investigates nonlinear oscillations of a rotary inverted pendulum (RIP) with a full-state feedback controller. Lagrange’s equations are employed to derive an accurate 2-DoF mathematical model, whose parameter values are extracted by both the measurement and 3D modeling of the real system components. Although the governing... 

A suction-controlled ring device has been developed to continuously measure the coefficient of lateral soil pressure in deformable unsaturated soil samples from the at-rest to the active condition under application of increasing vertical pressure and controlled matric suction. The device incorporates a thin aluminum specimen ring equipped with horizontal strain gages for recording the lateral soil strains. In addition, a sensor recording water volume changes is utilized to continuously monitor the degree of saturation of the soil sample during tests. The matric suction within the soil texture is controlled using the axis translation technique. In order to verify the performance of the ring... 

We introduce a new smooth, non-toxic, biocompatible method for cross-linking of gum tragacanth (GT), a polysaccharide of natural origin, in order to serve as a new supporting matrix for immobilization systems. The modified gum is used as a matrix for the catalysis of the conversion of benzyl penicillin to 6-aminopenicillanic acid (6-APA) by means of Escherichia coli ATCC11105 with penicillin G acylase (PGA) activity. The results show that GT beads can not only serve as a proper matrix for immobilization, but show enhanced hydrolysis rate and stability compared to other immobilization systems used for this reaction. This signifies the potential of GT as a biocompatible matrix for... 

The Class-E power amplifier has been widely studied and formulated in the literature. Although the majority of reported inductive coupling wireless power transfer (WPT) systems use a class-E power amplifier for driving the primary coil, still there is a lack of a comprehensive study on class-E circuit dedicated to WPT, providing a set of closed form design equations for proper class-E operation. This paper presents the required design equations needed to design a 'true' class-E circuit for WPT applications. Equations for the series-tuned secondary coil WPT system are presented, as well as two different design procedures for the parallel-tuned secondary coil. The derived equations have been... 

Pole Side Impact Tes is one out of three crash tests described by Euro NCAP standard for star rating of a vehicle and is required for assessing the Adult Occupant Protection. In this paper the goal is to determine the crashworthiness of side doors and B pillar in a Pole Side Impact Test based on Euro New Car Assessment Program (Euro-NCAP) using computer and simulation method. In this matter, a vehicle model has been prepared and meshed using Hypermesh and CATIA. The velocity of 29 km/h has been assigned to the vehicle which was on top of a cart while the pole has been assigned as a rigid static object based on Euro NCAP requirements specifically. Results show that different amounts of energy... 

To assess a car under the Euro New Car Assessment Program (Euro-NCAP), Adult Occupant Protection is one out of three parameters which need to be calculated with a weight factor of 50% while the other parameters, Child Occupant Protection and Pedestrian Occupant Protection, have a weight factor of 20%. The Pole Side Impact Test, beside two other tests, Side and Front Impact, is also required to calculate the Adult Occupant Protection. It shows how important the Pole Side Impact Test is and what an effective role it has in the car rating assessment. In this paper, the objective is to evaluate the effect of thickness on the energy absorbed by the side doors and the B pillar and its...