Sharif Digital Repository

“Entrepreneurship ecosystem” is defined as the elements – individuals, organizations or institutions – apart from the individual entrepreneur that are conducive to, or inhibitive of, the choice of a person to become an entrepreneur, or the probabilities of his or her success following launch. Entrepreneurial businesses operate locally or regionally and are therefore subject to local or regional contextual influence. Moreover particularly in larger countries there can exist significant variation in industry structure and economic base across regions, emphasizing the importance of regional focus. Adopting appropriate policies at the regional level need to have a deep and accurate... 

Today, the pace of information generation, fast processing and instant decision-making is increasing. In this regard, one of the main needs in the field of data management and processing is stream data processing. Today's world needs new methods to deal with and analyze these data. Two of the most challenging aspects of data streams are (i) concept drift, i.e. evolution of data stream over time, which requires the ability to make timely decisions against the high speed of receiving new data; (ii) limited memory storage and the impracticality of using memory due to the large amount of data. Clustering is one of the common methods for processing data streams, without having basic knowledge... 

In this study, we explore the dynamics of the stock market using an agent-based simulation platform. Our approach involves creating a multi-strategy market where each agent considers both fundamental and technical factors when determining their strategy. The agents vary in their approach to these factors and the time interval they use for technical analysis. Our findings indicate that investing heavily in reducing the value–price gap was a successful strategy, even in markets where there were no trading forces to reduce this gap. Furthermore, our results remain consistent across various modifications to the simulation’s structure  

Although existing literature on organizational culture and its change process contains meaningful and rich theories but our studies show that there is no perfect and detailed framework on linking organizational culture change and corporate entrepreneurship culture. In addition to that, Gamification –defined as taking the game design elements into non-game contexts– is a fruitful and academically rich research area. Fortunately an idea proposed recently to explain a method for enhancements in organizational culture in general, and in corporate entrepreneurship culture in particularby Yavari and Jafarian based on using game mechanisms. In their paper "A Gamification-Based Method for Corporate... 

In this research, a powder containing magnesium-aluminate spinel particles is prepared based on co-precipitation method and 5% , 10%, 15% and 20% zirconia-contained composites are produced as second phase from the synthesized powder. The raw materials used in the synthesis comprise hexa-hydrated magnesium nitrate, nona-hydrated aluminum nitrate, ammonium bicarbonate, 28% ammonium solution and distilled water. The properties of the powder is then investigated using STA, XRD and SEM tests. Also, XRD and SEM analyses as well as triple point flexural strength and Vickers hardness tests are carried out in order to investigate the effect of adding zirconia to the powders. The variations of the... 

The purpose of this thesis is the construction of hard and tough Zirconia bodies from economical raw materials using minimum sintering time and temperature.
Stabilizers cause tetragonal particles to be remained in cubic phase. Most additives are Ca, Ce, Mg and Y ions the whole of which are rare earth elements and make solid solutions with Zirconia.
In this project different percents of CaO, MgO, CeO2, and Y2O3 were mixed with ZrO2 and they were sintered after granulation, cold pressing and Cold Isostatic Pressing. Using jar milling and fast milling, the particle size of purchased ZrO2 was reduced to 0.7 um. The whole needed additives were purchased with particle size below 300 nm.... 

In this process transparent polycrystalline alumina ceramic was provided by submicron alumina gel casting and spark plasma sintering. The monomer system in this process including met acrylamide and methylene bis acrylamide was chosen as a monomer and cross linker. These two agents comprise 5%wt of the precursor with the ratio of 3 to 1 respectively. With the optimization of Dolapix CE64 as a dispersant and providing the suspension with 76%wt, a greenware with the density of 56.3% wt was obtained. Differential thermal analysis of green body showed that the existing monomers are removed by the time the body reaches 550°C. In order to access high real in-line transmittance, the microstructure... 

In recent years lithium-air batteries captured worldwide attention because of their high energy density. Solid state electrolytes is one of the main components of lithium-air batteries. Lithium almunium titanium phosphate(LATP) is a nasicon type ion conduction which may be of great potential as solid electrolyte. The object of this thesis was the preparation of LATP solid electrolyte which can be used in a lithium-air battery. To reach this goal LATP powder was synthesized using a solution-based method and an appropriate crystallization temperature was selected based on obtained results of X-ray diffraction analysis. In the next step solid electrolytes was prepared under different pressing... 

The goal of the present study is to analyze the effect of CaF2 and nano-TiO2 as additives on formulation and properties of common dental glass-ceramics. To achieve the goal, a glass system based on SiO2-Al2O3-Li2O-K2O-P2O5-ZnO-ZrO2 was considered to produce glass-ceramic samples and the additives, nano-TiO2 and CaF2, with the 0.5, 1, and 1.5 %Wt was added to the system. After the melting process, the glass samples poured in the water and ferrite was produced. In the next step, the ferrite was milled and pressed. In the heat treatment step, the samples were treated in the temperature range of 650-850°C in order to gain lithium disilicate glass-ceramics. In the last step, the chemical... 

Magnesia-Doloma refractories has advantages such as stability in alkaline environments, clean steel production, resistance to acid slag, good cement kiln coating flexibility, low production cost. It also has some weaknesses such as low resistance to thermal shock and quick hydration. In the present study using Birjand Mines Magnesite powders and Dolomites from Zefreh, Esfahan, Magnesia-Doloma clinkers were pressed under the pressure 90 MP and prepared at 1650⁰C in furnace under air atmosphere. The effect of adding 0, 2, 4, 6, and 8% of the Microparticles and Nanoparticles of α-Alumina on microstructure, physical properties, hydration resistance and Thermal shock resistance was studied. Phase... 

TiO2 has been considered the most promising photocatalyst for the degradation of pollutants in air or water; however, it shows poor absorption of visible light and requires ultraviolet (UV) light for activation. We have successfully synthesized a visible-light-active carbon and nitrogen and yttrium tridoped TiO2 catalyst. In this study, Nanocrystalline photocatalysts of TiO2 doped with yttrium, codoped with carbon and nitrogen and tridoped with carbon and nitrogen and yttrium were prepared by the sol–gel method and investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy ( DRS), Scanning electron microscopy (SEM/EDS) and... 

The main purpose of this research was simultaneous doping of carbon and nickel in the structure of barium strontium titanate, in order to investigate its dielectric and optical properties. Powders and films of BST, was synthesized by the sol-gel method in six different compositions: without any dopant, 0.04mol nickel dopant, 0.04mol nickel dopant accompanied by different amounts of carbon (0.01, 0.02, 0.03 and 0.04 mol). Suspensions were dip coated on alumina and quartz substrates. Structural features and chemical bonds, were studied through thermal analysis, XRD, FT-IR, FESEM and AFM. For electrical and optical properties, LCR-meter and UV-Vis were used. XRD and FESEM proved that nickel... 

This study investigates the effect of titanium dioxide and magnesium oxide additives on hydroxyapatite synthesized by sol-gel and composite with the predominant phase of hydroxyapatite by in situ method to improve mechanical properties. Scaffold samples were synthesized with nanometer-sized hydroxyapatite and composite powder particles by gel casting and sintered at 1200 ° C. Then, to evaluate the synthesized powders, simultaneous thermal analysis (STA), X-ray diffraction test, FTIR test, FESEM, EDS, and MAP analysis were used. Also, to evaluate the mechanical properties of the scaffolds, a compressive test was used, and to evaluate the scaffolds' density, the Archimedes method was used.... 

To reduce material consumption needed in production as well as avoiding thousands of tons of contaminations produced by spent materials in the battery industry, recycling was taken into consideration. In this study silica was recycled from spent lead-acid battery separators by the pyrolysis process. silica along with high-density polyethylene (HDPE), can be used as supporting material for fabricating form-stable phase change materials (FSPCM). FSPCMs are of great ability to be used as thermal energy storage (TES) in different parts of a building e. g. wallboards to reduce energy consumption. In this line, an eutectic mixture of lauric acid, palmitic acid and paraffin with the melting point... 

In this project, the nanostructured titanium oxide with heaily doping of oxides of cerium and tin was synthesized using the sol-gel process and its properties were studied. To synthesize TiO2, titanium tetraisopropoxide precursor was used. Cerium nitrate and aqueous tin chloride precursors were utilized for cerium and tin synthesis. Then, they were mixed with Titania precursor causing a severe doping. After that, a gel was produced and it was aged and eventually, it was dried and calcined. XRD and SEM were used to determine the phase and particle size SEM and XRD results showed that doping had great impact on TiO2 crystals. The approximate size of nanoparticles was calculated using... 

Magnesia-doloma refractories are alkaline products made by combining sintered or fused dolomite and magnesite. These refractories contain 50-80 wt% magnesium and a higher percentage of magnesium oxide, provides desirable properties such as improved refractoriness and resistance to air moisture absorption. Magnesia-doloma refractories have significant weaknesses, including rapid hydration due to the presence of CaO and MgO phases. These refractories are also primarily used with carbon additives in the industry, where increasing the carbon weight percentage in these refractories weakens their strength and some of mechanical properties. In the present study, the effect of adding carbon... 

In this research, the additive effect of mullite and spinel nanoparticles on aluminum-based composites has been investigated in order to improve mechanical properties. Composite samples with synthesized mullite powder particles and spinel with the sizes of 80 nm and 200 microns respectively with values of (1.5, 3, 4.5) percent and spinel particles with values of (3, 6, 9) percent as phase The reinforcement, whose particles are preheated to 200°C and inside the aluminum foils, due to better wetting time with the background, was added to the background phase by the vortex casting method, and the temperature was cast at 750°C. . Then, in order to check the prepared powders and the...