Sharif Digital Repository

Additive manufacturing (AM) has gained significant attention in recent years as a novel approach to fabricate three-dimensional parts. Its advantages, including high speed, low-cost production for small-scale batches, and greater design freedom, have made it a competitive alternative to traditional manufacturing methods. However, the application of AM for components subjected to fretting fatigue requires careful evaluation. Fretting fatigue is a major cause of failure in turbines, particularly at the contact interface between turbine blade roots and disk. In this study, the influence of AM and post-processing treatments on the fretting fatigue life of Ti-6Al-4V alloy was investigated. Five... 

One of the most important problems in machine learning is investigating the performance of the learning algorithms, and especially deep neural networks, on adversarial examples, which are generated by imperceptibly perturbing input images, so that cause the model make a wrong prediction. Not only this line of research is important for making deep neural networks dependable, but also can help with understanding the fundamental limitations of deep neural networks, and the nature of their operation, which can in turn provide researchers with valuable insights into artificial intelligence. In this research work, we have tried to approach the topic with a mainly theoretical mindset. The method we... 

Existing face forgery detection methods mainly focus on certain features of images, such as features related to image noise, local textures or frequency statistics of images for forgery detection. This makes the extracted representations and the final decision depend on the data in the database and makes it difficult to detect forgery with unknown manipulation methods. Solving this challenge, which is called the generalization challenge in artificial intelligence literature, has become the main goal of researchers in this field. In this thesis, the focus is on extracting effective features for success in forgery detection and preventing the performance of the forgery detection network from... 

In recent years, deep learning has experienced rapid and remarkable advancements, demonstrating exceptional performance in various applications such as computer vision, natural language processing, and autonomous vehicles. These models are continually evolving and expanding, yet they harbor inherent vulnerabilities that prevent complete trust in their reliability. One of the most critical issues is their susceptibility to adversarial attacks, where a clean image is subtly manipulated to create an adversarial example. Adversarial examples, generated by adding imperceptible perturbations to input data, can easily mislead deep learning models into making highly confident yet incorrect... 

Wind energy technologies guarantee low pollution and operational costs. Using a DFIG and a fractionally rated power electronics converter gives variable speed operation with a low cost drive train. As energy policy organizations have allocated a considerable quota of wind energy generation to offshore wind farms, the absence of slip rings and brushes in the brushless DFIG (BDFIG) is an advantage for offshore wind turbines where maintenance is vital and expensive. With increasing wind power penetration in power systems, grid code requirements are an important consideration for the ride-through capability of wind farms through voltage dips, particularly for multi- MW wind turbine generators.... 

In this research, a powder containing magnesium-aluminate spinel particles is prepared based on co-precipitation method and 5% , 10%, 15% and 20% zirconia-contained composites are produced as second phase from the synthesized powder. The raw materials used in the synthesis comprise hexa-hydrated magnesium nitrate, nona-hydrated aluminum nitrate, ammonium bicarbonate, 28% ammonium solution and distilled water. The properties of the powder is then investigated using STA, XRD and SEM tests. Also, XRD and SEM analyses as well as triple point flexural strength and Vickers hardness tests are carried out in order to investigate the effect of adding zirconia to the powders. The variations of the... 

The purpose of this thesis is the construction of hard and tough Zirconia bodies from economical raw materials using minimum sintering time and temperature.
Stabilizers cause tetragonal particles to be remained in cubic phase. Most additives are Ca, Ce, Mg and Y ions the whole of which are rare earth elements and make solid solutions with Zirconia.
In this project different percents of CaO, MgO, CeO2, and Y2O3 were mixed with ZrO2 and they were sintered after granulation, cold pressing and Cold Isostatic Pressing. Using jar milling and fast milling, the particle size of purchased ZrO2 was reduced to 0.7 um. The whole needed additives were purchased with particle size below 300 nm.... 

In this process transparent polycrystalline alumina ceramic was provided by submicron alumina gel casting and spark plasma sintering. The monomer system in this process including met acrylamide and methylene bis acrylamide was chosen as a monomer and cross linker. These two agents comprise 5%wt of the precursor with the ratio of 3 to 1 respectively. With the optimization of Dolapix CE64 as a dispersant and providing the suspension with 76%wt, a greenware with the density of 56.3% wt was obtained. Differential thermal analysis of green body showed that the existing monomers are removed by the time the body reaches 550°C. In order to access high real in-line transmittance, the microstructure... 

In recent years lithium-air batteries captured worldwide attention because of their high energy density. Solid state electrolytes is one of the main components of lithium-air batteries. Lithium almunium titanium phosphate(LATP) is a nasicon type ion conduction which may be of great potential as solid electrolyte. The object of this thesis was the preparation of LATP solid electrolyte which can be used in a lithium-air battery. To reach this goal LATP powder was synthesized using a solution-based method and an appropriate crystallization temperature was selected based on obtained results of X-ray diffraction analysis. In the next step solid electrolytes was prepared under different pressing... 

The goal of the present study is to analyze the effect of CaF2 and nano-TiO2 as additives on formulation and properties of common dental glass-ceramics. To achieve the goal, a glass system based on SiO2-Al2O3-Li2O-K2O-P2O5-ZnO-ZrO2 was considered to produce glass-ceramic samples and the additives, nano-TiO2 and CaF2, with the 0.5, 1, and 1.5 %Wt was added to the system. After the melting process, the glass samples poured in the water and ferrite was produced. In the next step, the ferrite was milled and pressed. In the heat treatment step, the samples were treated in the temperature range of 650-850°C in order to gain lithium disilicate glass-ceramics. In the last step, the chemical... 

Magnesia-Doloma refractories has advantages such as stability in alkaline environments, clean steel production, resistance to acid slag, good cement kiln coating flexibility, low production cost. It also has some weaknesses such as low resistance to thermal shock and quick hydration. In the present study using Birjand Mines Magnesite powders and Dolomites from Zefreh, Esfahan, Magnesia-Doloma clinkers were pressed under the pressure 90 MP and prepared at 1650⁰C in furnace under air atmosphere. The effect of adding 0, 2, 4, 6, and 8% of the Microparticles and Nanoparticles of α-Alumina on microstructure, physical properties, hydration resistance and Thermal shock resistance was studied. Phase... 

TiO2 has been considered the most promising photocatalyst for the degradation of pollutants in air or water; however, it shows poor absorption of visible light and requires ultraviolet (UV) light for activation. We have successfully synthesized a visible-light-active carbon and nitrogen and yttrium tridoped TiO2 catalyst. In this study, Nanocrystalline photocatalysts of TiO2 doped with yttrium, codoped with carbon and nitrogen and tridoped with carbon and nitrogen and yttrium were prepared by the sol–gel method and investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy ( DRS), Scanning electron microscopy (SEM/EDS) and... 

The main purpose of this research was simultaneous doping of carbon and nickel in the structure of barium strontium titanate, in order to investigate its dielectric and optical properties. Powders and films of BST, was synthesized by the sol-gel method in six different compositions: without any dopant, 0.04mol nickel dopant, 0.04mol nickel dopant accompanied by different amounts of carbon (0.01, 0.02, 0.03 and 0.04 mol). Suspensions were dip coated on alumina and quartz substrates. Structural features and chemical bonds, were studied through thermal analysis, XRD, FT-IR, FESEM and AFM. For electrical and optical properties, LCR-meter and UV-Vis were used. XRD and FESEM proved that nickel... 

This study investigates the effect of titanium dioxide and magnesium oxide additives on hydroxyapatite synthesized by sol-gel and composite with the predominant phase of hydroxyapatite by in situ method to improve mechanical properties. Scaffold samples were synthesized with nanometer-sized hydroxyapatite and composite powder particles by gel casting and sintered at 1200 ° C. Then, to evaluate the synthesized powders, simultaneous thermal analysis (STA), X-ray diffraction test, FTIR test, FESEM, EDS, and MAP analysis were used. Also, to evaluate the mechanical properties of the scaffolds, a compressive test was used, and to evaluate the scaffolds' density, the Archimedes method was used....