Sharif Digital Repository

In recent years, Internet traffic has nearly doubled in the core network every two years, and it is expected to continue to grow in the future. With this growth, there is a need for very high capacity and economically efficient transmission systems, which optical communication is the best choice. Elastic optical network (EON) is one of the best options for achieving this goal in the future. Unlike existing networks, the transmission parameters of EON will be customizable, which will have an essential role in optimizing bandwidth assignment. The problem facing scientists today is to approach the final physical capacity of current optical fibers. The solution proposed for this challenge is... 

The purpose of this study is to develop a simulated model of a greenhouse using two different ventilation systems, a fan&pad system and an air-soil converter equipped with a sprinkler in order to compare the cooling performance of these two systems in hot seasons. The main focus of the analysis of the results is on how the temperature and humidity are distributed throughout the greenhouse space. In order to develop a three-dimensional model with computational fluid dynamics method, greenhouse simulation in Ansis software has been used. The development of ventilation model in the greenhouse is done by creating boundary conditions using optimal design. Also, to simulate soil-air conditioning... 

This project is devoted to experimental investigation of increasing on production of polyethylene/clay nanocomposites (PECNs) and polypropylene/clay nanocomposites (PPCNs) via in-situ polymerization method. First of all we produced bi-supported Ziegler-Natta catalyst to polymerized polyolefins nanocomposites. Bentonite type clay and Magnesiumethoxide (Mg (OEt)2) were used as the support of Tetrachloridetitanium (TiCl4). Catalyst support and polymerization process have been done in slurry phase using Triisobutylaluminum (TiBA) as the co-catalyst. The efficiency of preapared bi-supported Ziegler-Natta was reasonably high (average 200 (gr. Product/mmol Ti. h) for PECNs and 195 (gr. Product/mmol... 

Nowadays, science and technology, once again, lead approach to renewable natural resources to access energy due to fossil resources restrictions. Growing need for energy, being concerned about exhaustion of fossil resources, environmental pollution caused by burning fossil materials, climate warming and the greenhouse effect and etc. are obvious evidences of aforesaid fact. On the other hand, oceans and seas are large reservoirs of energy which comes from sunlight, geothermal resources, Earth's rotation and gravity by means of mechanical and hydrothermal processes. During the years, many ideas were conducted to achieve and mine the mentioned enormous energy potential of the oceans and seas.... 

The main goal of this thesis is the design and development of a rehabilitation device for helping patients “to improve blood circulation” & retain and recover their abilities if possible that were lost during the stroke or a accident like that (my research in karaj/iran shows that it is possible by just movement of the specific body part). The focus is on hand in this thesis because Injuries to the hand are common and can be very debilitating since our hands are our primary means for interacting with our world. For rehabilitation in case of human hand there are several practices that should be done for patients either in home or in a rehabilitation center, time and money that is supposed to... 

In the past few decades, shaking tables are widely used to evaluate system response of structures under seismic excitations. These devices are used without any fundamental research performed on a shaking table system as an entity model. In most of these studies for simplicity, it is assumed that there exist no considerable vibration and displacement around the shaking tables, and no attention is paid to the peripheral substances such as soil settled under the foundation.
In this thesis, result of ambient vibration test on shaking table system (solid deck, concrete foundation and soil layer) has been presented. Precise sensors known as low frequency and high accuracy accelerometers have... 

Out of several ground improvement techniques available, stone columns have been widely used. This technique has been successfully applied to increase the bearing capacity and to reduce the settlement for foundation of structures like liquid storage tanks, earthen embankments, raft foundations, etc., where a relatively large settlement is permissible. This technique has, generally, been proven successful in increasing the stiffness of weak soils, upgrading their safe bearing capacity, and reducing their total and differential settlements, as well as speeding up their consolidation process. The beneficial effects of stone column installation in weak deposits is manifested in the form of... 

In the present study, a new version of haptic devices is presented in which user’s hand is in contact with the device just while collision with virtual surface. In this system, the position of user’s finger can be traced by using a camera and the haptic device follows user’s finger at the distance of about two centimeters. While the haptic device approaches to the virtual surface, gradually reduces its speed and stops about two centimeters distant of virtual plane. Then user’s hand collides with the haptic device which is static. Greater fidelity, transparency, more stability and also no need to large actuators are of the advantages of this system. In this project, first we present a new... 

Laminar forced convection flow through a channel partially filled with a porous material was numerically studied in this thesis. The Navier-Stokes and Brinkman-Forchheimer equations were used to model the fluid flow in the free and porous regions, respectively. Coupling of the pressure and velocity fields was resolved using the SIMPLEC algorithm. The local thermal equilibrium was adopted in the energy equation. The effects of the thermal conductivity ratio, Darcy number, porosity, Reynolds number and height of the porous insert on velocity and temperature field were investigated. The results show that the flow behavior and its associated heat transfer are susceptible to the variation of the... 

In this thesis we try to find optimized parameters for imaging and manipulation of a biosample with AFM. For this we have prepared a numerous Molecular Dynamics simulation and find some reliable result. So, first we have focused on imaging process in Non contact mode (the less harmful mode). Then we headed into the manipulation process. The main problem about manipulating a biosample is the environment. In imaging section, the process of imaging a biomolecule by AFM is modeled using molecular dynamics simulations. Since the large normal force exerted by the tip on the biosample in contact and tapping modes may damage the sample structure and produce irreversible deformation, the non-contact... 

Results of previous studies on silt and clay indicated that variations in the small strain shear modulus, Gmax, during drying had a non-linear increasing trend with matric suction with greater values upon wetting. However, due to different material properties and inter-particle forces, different behaviour in Gmax is expected for sand. Although considerable research has been devoted in recent years to characterize the behaviour of Gmax of sand during drying, rather less attention has been paid to the effect of hydraulic hysteresis on Gmax and its variations during wetting. In the study presented herein, an effort was made to characterize the variation of Gmax for specimens of sand during... 

Abstract The problem of competetive facility location can be defined as follows: There are a number of customers in the form of points in space, and two players arrange a number of facilities in the form of points in space, given some limitations, respectively. Each customer’s connection to each facility has a cost for the customer and an advantage for the facility, and each customer wants to be connected to at most one of the facilities which has the lowest cost for him. The goal is to find the strategy of placing the facilities and determining the cost which the facility receives from the customer, in such a way that the player’s profit is maximised.In this thesis, we first sought to...