Loading...
Search for: noori--hassan
0.095 seconds

    Simulatin of Reinforcement Corrosion in Pozzolanic Concrete by Neural Network

    , M.Sc. Thesis Sharif University of Technology Noori, Hassan (Author) ; Afshar, Abdollah (Supervisor)
    Abstract
    One of the most important factors of reducing durability of concrete structures is corrosion of steel reinforcement in concrete. In this paper, corrosion behavior of reinforcing steel in concrete is investigated in two different methods of protection based on neural network. As regard the first method, pozzolanic additives with optimized percentage were added to Concrete mix design (the percentage of these additives are 25% Weight of cement of fly ash, Micro silica with 10 percent of weight of cement and 25% of Blast Furnace slag weight of cement). In the second approach of protection, 0/5 percent weight of cement of ferrogard 901 inhibitor is added to basic mix concrete design and the... 

    Design of an Optimal Site Deployment Procedure in Different Air-Defense Scenarios

    , M.Sc. Thesis Sharif University of Technology Noori, Mohammad (Author) ; Fathi, Mohsen (Supervisor)
    Abstract
    One of the most important issues among defense is the increasing of the defense power using present facilities. Therefore, optimal setting and arrangement of equipment by considering different air-to-earth attack of enemy without knowing of properties and capabilities of available systems may not be possible. So, using defense equipment considering properties of them, and paying attention to existence restrictions and effective elements can have an effective role with the design of suitable algorithm.The main purposes of this thesis are: maximization of the efficiency of a defense system against. aerial invader targets, achieving the best arrangement of defense equipment based on suggested... 

    Transmission of Analog Signals in Fading Channels using HARQ

    , M.Sc. Thesis Sharif University of Technology Noori, Nima (Author) ; Hossein Khalaj, Babak (Supervisor)
    Abstract
    In this dissertation we will study the problem of transmitting the information of continuous source over fading channel, especially when the transmitter does not have complete information about the channel status. In this situation we will have a tradeoff between the Quality of received packets and the Reliability in transmissions. To increase the quality of packets, for example, we should increase the quantization, and therefore, the transmission rates at the transmitter. But this will also increase the Error Probability at the receiver. It means that if the receiver gets the transmitted packet, it will have a better estimation of information source, but it is likely that error happens and... 

    Graph-Based Outlier Detection

    , M.Sc. Thesis Sharif University of Technology Noori Zehmakan, Abdolahad (Author) ; Daneshgar, Amir (Supervisor)
    Abstract
    One of the most heatedly debated issues in Computer Science is Outlier Detection due to its vast and substantial applications such as credit cards, Image Processing,tax fraud detection, and medical approaches. Consequently, Outlier detection has been researched within various domains and knowledge disciplines. On the other hand, the research attempts have not been sufficient to overcome this critical problem considerably inasmuch as nearly all proposed techniques are associated with a special kind of applications or datasets.Firstly, this thesis attempts to provide a precise definition which not only excludes other one’s drawbacks, but also has its distinctive merits. Three essential... 

    Flow and Heat Transfer between Two Cylinders with Internal Rotation

    , M.Sc. Thesis Sharif University of Technology Kaviani, Reza (Author) ; Noori Boroujerdi, Ali (Supervisor)
    Abstract
    The objective of this project is numerical simulation of air flow and heat transfer between two horizontal concentric cylinders with rotation of inner cylinder and inertia of outer cylinder grooves on the inner cylinder. In this study, the air, meanwhile rotational motion by the inner cylinder will enter into the annular space between two cylinders with certain flow rate. It can be mentioned to cooling of power plant generators, Electric motors and rotating machines among usages of air flow between two cylinders. In this article the objective is calculation of pressure drop and Nusselt number, temperature distribution on the inner cylinder under conditions of constant temperature of... 

    An Empirical Study on the Use of Cross-Project Clones

    , M.Sc. Thesis Sharif University of Technology Keshani, Mehdi (Author) ; Heydar Noori, Abbas (Supervisor)
    Abstract
    Code clones are similar code snippets in software projects. Code clones, along with their disadvantages and applications, have long been studied by researchers. In recent years, due to the popularity of open source software, using software development ecosystems such as GitHub have increased dramatically. These ecosystems allow their users to perform high-quality software development without the need for physical presence. A number of previous studies have shown that software is being developed or modified repeatedly and many defects in software projects are duplicates. Finding these recurring codes and defects may be useful for software developers. Given that finding and fixing software... 

    Corporate-level technology strategy and its linkage with corporate strategy in multi-business companies: IKCO case study

    , Article Technological Forecasting and Social Change ; Volume 122 , 2017 , Pages 243-252 ; 00401625 (ISSN) Arasti, M ; Khaleghi, M ; Noori, J ; Sharif University of Technology
    2017
    Abstract
    This article deals with technology strategy and its linkage with overall strategy at multi-business, diversified groups. In the last two decades, the alignment of technology and business strategy has been one of the important research fields in strategy and technology management literature. These researches has been concentrated on single companies through which different frameworks, models, and decision support tools have been developed and widely utilized by industries. Although multi-business and diversified groups play an important role in national economy of developing countries and need a comprehensive and overall plan for the management of their diversified technological capabilities,... 

    Biological Regeneration of Used Activated Carbon

    , M.Sc. Thesis Sharif University of Technology Noori Ghezeldareh, Maral (Author) ; Borghei, Mehdi (Supervisor)
    Abstract
    Tehran Refinery, as an industrial center that has significant water consumption in Tehran, intends to use the flow of water from the treatment plant south of Tehran after final preparation, with the aim of managing water resources and meeting its needs. And it uses a biological activated carbon (BACF) filter to reduce the DOC concentration. In these filters, the removal of organic matter is performed by the adsorption process as well as the biodegradation process by microorganisms grown on activated carbon. The presence of biofilm leads to continuous bio-regeneration of activated carbon during the water treatment process. Therefore, in this study, by examining the performance of these... 

    Fault Diagnosis of Lithium-ion Battery Pack of Electric Vehicles Using Machine Learning Algorithms

    , M.Sc. Thesis Sharif University of Technology Noori, Fatemeh (Author) ; Moeini Aghtaei, Moein (Supervisor)
    Abstract
    In the current era, the urgent need to reduce the use of fossil fuels and limit carbon emissions has highlighted the importance of shifting from traditional gasoline-powered vehicles to electric vehicles. The evolving landscape and challenges in the field of electric vehicles highlight the importance of ensuring the safety and reliability of energy storage systems. Lithium-ion batteries play a central role in electric vehicle technology, requiring thorough research efforts. Notably, the detection of internal short circuit, a common issue in lithium-ion batteries, has become a focus of researchers in recent years. This study aims to investigate the internal short circuit fault in lithium-ion... 

    Structural Design of a Launch Vehicle with Reusable First Stage

    , M.Sc. Thesis Sharif University of Technology Hassan Jamaklu (Author) ; Haddadpour, Hassan (Supervisor)
    Abstract
    Aerodynamics loads and aeroheating during reentry, are one of the challenging issues in designing One of the main challenges in the design and application of reusable spacecrafts is the aerodynamic and thermal loads acting on their structures during reentry into the atmosphere. For this reason, all the concepts/prototypes presented in the 20th century were either not fully reusable, or were partially canceled, or did not have economic justification. In this report, the aerodynamic loads on the first stage of a launch vehicle during the launch and return phases have been investigated. Due to the fact that the main part of the first stage of the vehicle includes fuel and oxidizer tanks, the... 

    The Evolution of the Idea of Progress in Western Thought and a Critical Look at It from an Islamic View

    , M.Sc. Thesis Sharif University of Technology Monadi Noori, Saber (Author) ; Taghavinia, Nima (Supervisor)
    Abstract
    “Progress” is among most frequently used terms in the past few centuries in public discussions, scientific communities as well as economic and sociopolitical policy making. This term has been used in our daily conversations so frequently that it seems to become an intrinsic goal for human beings. However, even a short survey of the introduced meanings of and suggested approaches to achieve “progress” during the last four centuries - since the term was first used- demonstrates that we are faced with a multitude of views from the different - and sometimes contradictory - schools of thoughts. Unfortunately, in recent decades, despite our national desire to “progress”, we have not yet thought... 

    The linkage of technology strategy and overall strategy of multi business diversified groups: Literature review and theoritical framework

    , Article PICMET '10 - Portland International Center for Management of Engineering and Technology, Proceedings - Technology Management for Global Economic Growth, 18 July 2010 through 22 July 2010, Phuket ; July , 2010 , Pages 22-33 ; 9781890843229 (ISBN) Arasti, M. R ; Khaleghi, M ; Noori, J ; Sharif University of Technology
    2010
    Abstract
    This article deals with technology strategy and its linkage with overall strategy at multi-business, diversified groups. In the last two decades, the alignment of technology and business strategy has been one of the important research fields in strategy and technology management scopes. These researchs has been concentrated on single companies through which different frameworks, models & decision support tools have been developed and widely utilized by industries. Although multi-business and diversified groups play an important role in global and national economics and need a comprehensive and overall plan for the management of their diversified technological assets, there are few researchs... 

    A new double counting cancellation technique for three-dimensional ray launching method

    , Article IEEE Antennas and Propagation Society International Symposium, APS 2006, Albuquerque, NM, 9 July 2006 through 14 July 2006 ; 2006 , Pages 2185-2188 ; 15223965 (ISSN) Noori, N ; Shishegar, A. A ; Jedari, E ; Sharif University of Technology
    2006

    A bi-objective possibilistic programming model for open shop scheduling problems with sequence-dependent setup times, fuzzy processing times, and fuzzy due dates

    , Article Applied Soft Computing Journal ; Volume 12, Issue 4 , 2012 , Pages 1399-1416 ; 15684946 (ISSN) Noori Darvish, S ; Mahdavi, I ; Mahdavi Amiri, N ; Sharif University of Technology
    2012
    Abstract
    We are concerned with an open shop scheduling problem having sequence-dependent setup times. A novel bi-objective possibilistic mixed-integer linear programming model is presented. Sequence-dependent setup times, fuzzy processing times and fuzzy due dates with triangular possibility distributions are the main constraints of this model. An open shop scheduling problem with these considerations is close to the real production scheduling conditions. The objective functions are to minimize total weighted tardiness and total weighted completion times. To solve small-sized instances for Pareto-optimal solutions, an interactive fuzzy multi-objective decision making (FMODM) approach, called TH... 

    Numerical Simulation and Manufacture of a Proton Exchange Membrane Fuel Cell to Examine Mass and Charge Transport through Micro Porous Layers

    , M.Sc. Thesis Sharif University of Technology Asadzade, Mostafa (Author) ; Shamloo, Amir (Supervisor) ; Noori, Ali (Supervisor)
    Abstract
    Fuel cell is a power generator like internal combustion engines, but the first point is that internal combustion engines produce mechanical power while fuel cells produce electrical power. Secondly, internal combustion engines use hydrocarbon derivatives such as gas as fuel and their exhaust fumes are toxic gaseous, but fuel cells use hydrogen as fuel and their exhaust are only water in either vapor or liquid form. One of the most important issues in fuel cells is optimum design of micro channels of bipolar plates which is different regarding the type and application of fuel cells. Optimum designing of micro channels on bipolar plates plays a key role in fluid mass transport through micro... 

    Software-level instruction-cache leakage reduction using value-dependence of SRAM leakage in nanometer technologies

    , Article Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) ; Volume 6590 , 2011 , Pages 275-299 ; 03029743 (ISSN); 9783642194474 (ISBN) Goudarzi, M ; Ishihara, T ; Noori, H ; Stenstrom P ; Sharif University of Technology
    2011
    Abstract
    Within-die process variation is increasing in nanometer-scale process technologies. We observe that the same SRAM cell leaks differently under within-die process variations when storing 0 compared to 1; this difference can be up to 3 orders of magnitude at 60mV variation of threshold voltage (V th). Thus, leakage can be reduced if most often the values that dissipate less leakage are stored in the cache SRAM cells. We take advantage of this fact to reduce instruction-cache leakage by presenting three binary-optimization and software-level techniques: we (i) reorder instructions within basic-blocks so that their bits better match the less-leaky state of their corresponding cache cells, (ii)... 

    A novel architecture of pseudorandom dithered MASH digital delta-sigma modulator with lower spur

    , Article Journal of Circuits, Systems and Computers ; Volume 25, Issue 7 , 2016 ; 02181266 (ISSN) Noori, S. A. S ; Frashidi, E ; Sadughi, S ; Sharif University of Technology
    World Scientific Publishing Co. Pte Ltd  2016
    Abstract
    A Digital Delta Sigma Modulator (DDSM) is a Finite State Machine (FSM); it is implemented using finite precision arithmetic units and the number of available states is finite. The DDSM always produces a periodic output signal when the input is constant. This paper proposes a novel method of applying periodic dither to a DDSM in order to obtain minimized spurious tones. The effects of adding the pseudorandom dither signal in different stages within the proposed Multi-Stage noise Shaping (MASH) modulator are expressed in the equations, and the results are compared. We present results regarding the periodicity of the quantization noise produced by a MASH modulator with a constant input and a... 

    A novel structure of dithered nested digital delta sigma modulator with low-complexity low-spur for fractional frequency synthesizers

    , Article COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering ; Volume 35, Issue 1 , 2016 , Pages 157-171 ; 03321649 (ISSN) Sadat Noori , S. A ; Farshidi, E ; Sadoughi, S ; Sharif University of Technology
    Emerald Group Publishing Ltd  2016
    Abstract
    Purpose - Digital Delta Sigma Modulator (DDSM) is used widely in electronic circuits including Radars, class-D power amplifiers and fractional frequency synthesizers. The purpose of this paper is to propose an implementation for MASH DDSMs named as Multi Modulus Reduced Complexity (MMRC) architecture. Design/methodology/approach - This architecture will use a very simple pseudorandom Linear Feedback Shift Register (LFSR) dither signal with period N-d to randomize the digital MMRC modulator used for fractional frequency synthesizers. Using error masking methodology, the MMRC modulator can decrease the hardware consumption and increase accuracy of the fractional frequency synthesizer. Rules... 

    Determining the Optimal Irrigation Pattern in Agricultural Areas Using a Combination of Remote Sensing Data and the Development of a Lump Soil Moisture Model

    , M.Sc. Thesis Sharif University of Technology Noori, Amir Hossein (Author) ; Danesh-Yazdi, Mohammad (Supervisor)
    Abstract
    The purpose of this study is to introduce a new indicator to estimate the amount of irrigation water in excess of the need and also to determine the optimal irrigation pattern to reduce water loss in agriculture. According to the Food and Agriculture Organization of the United Nations, the major loss of fresh water takes place in agriculture, and the reduction of water resources is more significant in developing countries that do not have advanced agricultural equipment. One of the challenges in the studies related to reducing the amount of water used in agriculture is a lack of knowledge on the spatial distribution and temporal changes in water loss in a region. Although estimation of... 

    Computational Simulation of Turbulent Film Cooling, Using RANS/LES Hybrid Approach and Digital Filter Based Interface Boundary Conditions

    , M.Sc. Thesis Sharif University of Technology Sheikholeslam Noori, Mahdi (Author) ; Taeibi-Rahni, Mohammad (Supervisor)
    Abstract
    Nowadays, hybrid LES/RANS approach is being widely used by many researchers. This approach uses the advantages of both LES and RANS approaches simultaneously. Hybrid approach is as accurate as LES, but its cost is much lower. The biggest problem of hybrid approach is transformation of data between RANS and LES regions. Before, precursor simulation and synthetic methods, such as Fourier series and synthetic eddy methods (SEM) have been used extensively to solve such problems. Precursor simulation is expensive, because of high cost of generation of data. On the other hand, Fourier series method is confined to simple geometries, while SEM has problem of programming. Interface condition in this...