Offering a New Method to Determine Failure Rate of a System's Subsystems

, M.Sc. Thesis Sharif University of Technology Noroozian, Ali (Author) ; Eshraghniaye Jahromi, Abdolhamid (Supervisor)

Abstract

Determining the failure rate or reliability of a system's subsystems, is an important and influential stage which is noteworthy not only in design and in manufacture phases but also in improvement phase. This process is called reliability allocation in literature. Reliability allocation guarantees more reliable and competitive product. The consequence of considering this phase in designing a product is to improve designing and manufacturing methods. As a result, it is possible to gain cheap and reliable product while is compatible with costumer's demands. Many factors and parameters which exist in the process of reliability allocation, have caused it to complicated process. A number of...

Importance analysis considering time-varying parameters and different perturbation occurrence times

, Article Quality and Reliability Engineering International ; Volume 35, Issue 8 , 2019 , Pages 2558-2578 ; 07488017 (ISSN) Noroozian, A ; Baradaran Kazemzadeh, R ; Zio, E ; Akhavan Niaki, S. T ; Sharif University of Technology

John Wiley and Sons Ltd 2019

Abstract

Importance measures are integral parts of risk assessment for risk-informed decision making. Because the parameters of a risk model, such as the component failure rates, are functions of time and a perturbation (change) in their values can occur during the mission time, time dependence must be considered in the evaluation of the importance measures. In this paper, it is shown that the change in system performance at time t, and consequently the importance of the parameters at time t, depends on the parameters perturbation time and their value functions during the system mission time. We consider a nonhomogeneous continuous time Markov model of a series-parallel system to propose the...

System risk importance analysis using bayesian networks

, Article International Journal of Reliability, Quality and Safety Engineering ; Volume 25, Issue 1 , 2018 ; 02185393 (ISSN) Noroozian, A ; Baradaran Kazemzade, R. B ; Akhavan Niaki, S. T ; Zio, E ; Sharif University of Technology

World Scientific Publishing Co. Pte Ltd 2018

Abstract

Importance measures (IMs) are used for risk-informed decision making in system operations, safety, and maintenance. Traditionally, they are computed within fault tree (FT) analysis. Although FT analysis is a powerful tool to study the reliability and structural characteristics of systems, Bayesian networks (BNs) have shown explicit advantages in modeling and analytical capabilities. In this paper, the traditional definitions of IMs are extended to BNs in order to have more capability in terms of system risk modeling and analysis. Implementation results on a case study illustrate the capability of finding the most important components in a system. © 2018 World Scientific Publishing Company

Optimizing allocation of two dimensional irregular shapes using an agent based approach

, Article Wec 05: Fourth World Enformatika Conference, Istanbul, 24 June 2005 through 26 June 2005 ; Volume 6 , 2005 , Pages 241-244 ; 9759845857 (ISBN) Halavati, R ; Shouraki, S. B ; Noroozian, M ; Zadeh, S. H ; Ardil C ; Sharif University of Technology

2005

Abstract

Packing problems arise in a wide variety of application areas. The basic problem is that of determining an efficient arrangement of different objects in a region without any overlap and with minimal wasted gap between shapes. This paper presents a novel population based approach for optimizing arrangement of irregular shapes. In this approach, each shape is coded as an agent and the agents' reproductions and grouping policies results in arrangements of the objects in positions with least wasted area between them. The approach is implemented in an application for cutting sheets and test results on several problems from literature are presented. COPYRIGHT © ENFORMATIKA

Technical English for mechanical engineers

, Book Alemi, Minoo ; Meghdari,Ali

Sharif University Press 2014

Abstract

Local educational institutions produce in-house English for Specific Purpose (ESP) materials according to the curriculum policies designated and developed by the Ministry of Higher Education In Iran. To this end, this book aims to be used in the Iranian setting at the tertiary level for undergraduate students majoring in Mechanical Engineering. Moreover, the style of English usage in this ESP textbook is American.
Regarding the content of the textbook, it has both thematic organizations in which the topics are relevant and includes sufficient treatment of the target language areas necessary for the students. The principle organizing approach of this textbook is theme-based. In addition,...

Quantitative assessment of resting-state functional connectivity MRI to differentiate amnestic mild cognitive impairment, late-onset Alzheimer's disease from normal subjects

, Article Journal of Magnetic Resonance Imaging ; Volume 57, Issue 6 , 2023 , Pages 1702-1712 ; 10531807 (ISSN) Mohammadian, F ; Zare Sadeghi, A ; Noroozian, M ; Malekian, V ; Abbasi Sisara, M ; Hashemi, H ; Mobarak Salari, H ; Valizadeh, G ; Samadi, F ; Sodaei, F ; Saligheh Rad, H ; Sharif University of Technology

John Wiley and Sons Inc 2023

Abstract

Background: Alzheimer disease (AD) is a neurological disorder with brain network dysfunction. Investigation of the brain network functional connectivity (FC) alterations using resting-state functional MRI (rs-fMRI) can provide valuable information about the brain network pattern in early AD diagnosis. Purpose: To quantitatively assess FC patterns of resting-state brain networks and graph theory metrics (GTMs) to identify potential features for differentiation of amnestic mild cognitive impairment (aMCI) and late-onset AD from normal. Study Type: Prospective. Subjects: A total of 14 normal, 16 aMCI, and 13 late-onset AD. Field Strength/Sequence: A 3.0 T; rs-fMRI: single-shot 2D-EPI and...

Feedback control of the neuro-musculoskeletal system in a forward dynamics simulation of stair locomotion [electronic resource]

, Article Proc. of IMechE Part H: Journal of Engineering in Medicine ; 2009, Vol. 223, No. 6, pp. 663-675 Journal of NeuroEngineering and Rehabilitation ; Volume 11, Issue 1, 30 April 2014, Article number 78 Selk Ghafari, A. (Ali) ; Meghdari, Ali ; Vossough, Gholam Reza ; Sharif University of Technology

Abstract

The aim of this study is to employ feedback control loops to provide a stable forward dynamics simulation of human movement under repeated position constraint conditions in the environment, particularly during stair climbing. A ten-degrees-of-freedom skeletal model containing 18 Hill-type musculotendon actuators per leg was employed to simulate the model in the sagittal plane. The postural tracking and obstacle avoidance were provided by the proportional—integral—derivative controller according to the modulation of the time rate change of the joint kinematics. The stability of the model was maintained by controlling the velocity of the body's centre of mass according to the desired centre of...

Design and Construction of a Soft Actuated Exoskeleton for Hand Rehabilitation of Stroke Patients

, M.Sc. Thesis Sharif University of Technology Razavi Zadehgan, Ali Akbar (Author) ; Ghafari, Ali (Supervisor) ; Meghdari, Ali (Supervisor)

Abstract

The main goal of this thesis is the design and development of a rehabilitation device for helping patients “to improve blood circulation” & retain and recover their abilities if possible that were lost during the stroke or a accident like that (my research in karaj/iran shows that it is possible by just movement of the specific body part). The focus is on hand in this thesis because Injuries to the hand are common and can be very debilitating since our hands are our primary means for interacting with our world. For rehabilitation in case of human hand there are several practices that should be done for patients either in home or in a rehabilitation center, time and money that is supposed to...

Silica chloride/wet SiO2 as a novel heterogeneous system for the deprotection of acetals under mild conditions [electronic resource]

, Article Phosphorus, Sulfur, and Silicon and the Related Elements ; Volume 178:2667-2670, Issue 12, 2003 Mirjalili, B. F. (BiBi Fatemeh) ; Pourjavadi, Ali ; Zolfigol, Mohammad Ali ; Bamoniri, Abdolhamid

Abstract

A combination of silica chloride and wet SiO2 was used as an effective deacetalizating agent for the conversion of acetals to their corresponding carbonyl derivatives under mild and heterogeneous condition

Earthquake Branch

, M.Sc. Thesis Sharif University of Technology Bagher Shemirani, Ali Reza (Author) ; Bakhshi, Ali (Supervisor)

Abstract

In the past few decades, shaking tables are widely used to evaluate system response of structures under seismic excitations. These devices are used without any fundamental research performed on a shaking table system as an entity model. In most of these studies for simplicity, it is assumed that there exist no considerable vibration and displacement around the shaking tables, and no attention is paid to the peripheral substances such as soil settled under the foundation.
In this thesis, result of ambient vibration test on shaking table system (solid deck, concrete foundation and soil layer) has been presented. Precise sensors known as low frequency and high accuracy accelerometers have...

Selective synthesis of conjugated enynes from α-arylalkynols using LiCl-Acidic Al2O3 under solvent-free conditions [electronic resource]

, Article Journal of Chemical Research ; Volume 2002, Number 8, 1 August 2002, pp. 378-380(3) Pourjavadi, A. (Ali) ; Bagheri Marandi, Gholam

Abstract

Free Content Selective synthesis of conjugated enynes from α-arylalkynols using LiCl-Acidic Al2O3 under solvent-free conditions

Selective preparation of fluorescent 1,8-naphthalimides using acidic alumina under microwave irradiation [electronic resource]

, Article Journal of Chemical Research ; 01/2001; 2001(11):485-487 Pourjavadi, A. (Ali) ; Bagheri Marandi, Gholam

Abstract

7H-benzimidazo[2,1-a]benz[de]isoquinolin-7-one compounds were prepared in a selective manner by reaction between o-phenylenediamines and appropriate 1,8-naphthalenedicarboxylic anhydrides using acidic alumina under microwave irradiation

Comparison between Performance of Stone Columns and RAPs from the Bearing Capacity and Settlement Reduction Viewpoints

, M.Sc. Thesis Sharif University of Technology Golestani Dariani, Ali Akbar (Author) ; Pak, Ali (Supervisor)

Abstract

Out of several ground improvement techniques available, stone columns have been widely used. This technique has been successfully applied to increase the bearing capacity and to reduce the settlement for foundation of structures like liquid storage tanks, earthen embankments, raft foundations, etc., where a relatively large settlement is permissible. This technique has, generally, been proven successful in increasing the stiffness of weak soils, upgrading their safe bearing capacity, and reducing their total and differential settlements, as well as speeding up their consolidation process. The beneficial effects of stone column installation in weak deposits is manifested in the form of...

Performance of Partially Filled Mini-Channels with Porous Media

, M.Sc. Thesis Sharif University of Technology Azimi, Adel (Author) ; Nouri, Ali (Supervisor) ; Moosavi, Ali (Co-Advisor)

Abstract

Laminar forced convection flow through a channel partially filled with a porous material was numerically studied in this thesis. The Navier-Stokes and Brinkman-Forchheimer equations were used to model the fluid flow in the free and porous regions, respectively. Coupling of the pressure and velocity fields was resolved using the SIMPLEC algorithm. The local thermal equilibrium was adopted in the energy equation. The effects of the thermal conductivity ratio, Darcy number, porosity, Reynolds number and height of the porous insert on velocity and temperature field were investigated. The results show that the flow behavior and its associated heat transfer are susceptible to the variation of the...

Improvement of Stability of Haptic Force Interaction with Virtual Environments Using a Haptic Interface with a Separate Tracker

, M.Sc. Thesis Sharif University of Technology Mashayekhi, Ahmad (Author) ; Meghdari, Ali (Supervisor) ; Nahvi, Ali (Supervisor)

Abstract

In the present study, a new version of haptic devices is presented in which user’s hand is in contact with the device just while collision with virtual surface. In this system, the position of user’s finger can be traced by using a camera and the haptic device follows user’s finger at the distance of about two centimeters. While the haptic device approaches to the virtual surface, gradually reduces its speed and stops about two centimeters distant of virtual plane. Then user’s hand collides with the haptic device which is static. Greater fidelity, transparency, more stability and also no need to large actuators are of the advantages of this system. In this project, first we present a new...

Simulation of the Biomolecule Imaging and Manipulation Via AFM by Molecular Dynamics Method

, M.Sc. Thesis Sharif University of Technology Kheiroddin, Mohsen (Author) ; Meghdari, Ali (Supervisor) ; Moosavi, Ali (Supervisor)

Abstract

In this thesis we try to find optimized parameters for imaging and manipulation of a biosample with AFM. For this we have prepared a numerous Molecular Dynamics simulation and find some reliable result. So, first we have focused on imaging process in Non contact mode (the less harmful mode). Then we headed into the manipulation process. The main problem about manipulating a biosample is the environment. In imaging section, the process of imaging a biomolecule by AFM is modeled using molecular dynamics simulations. Since the large normal force exerted by the tip on the biosample in contact and tapping modes may damage the sample structure and produce irreversible deformation, the non-contact...

Characterzing Variation of Small Strain Shear Modulus of Unsaturated Sand During Hydraulic Hysteresis with Bender Elements

, M.Sc. Thesis Sharif University of Technology Shahbazan, Parisa (Author) ; Pak, Ali (Supervisor) ; Khosravi, Ali (Supervisor)

Abstract

Results of previous studies on silt and clay indicated that variations in the small strain shear modulus, Gmax, during drying had a non-linear increasing trend with matric suction with greater values upon wetting. However, due to different material properties and inter-particle forces, different behaviour in Gmax is expected for sand. Although considerable research has been devoted in recent years to characterize the behaviour of Gmax of sand during drying, rather less attention has been paid to the effect of hydraulic hysteresis on Gmax and its variations during wetting. In the study presented herein, an effort was made to characterize the variation of Gmax for specimens of sand during...

Sequential Competitive Facility Location In Continuous Geometric Space

, M.Sc. Thesis Sharif University of Technology Lavasani, Ali Mohammad (Author) ; Abam, Mohammad Ali (Supervisor)

Abstract

Abstract The problem of competetive facility location can be defined as follows: There are a number of customers in the form of points in space, and two players arrange a number of facilities in the form of points in space, given some limitations, respectively. Each customer’s connection to each facility has a cost for the customer and an advantage for the facility, and each customer wants to be connected to at most one of the facilities which has the lowest cost for him. The goal is to find the strategy of placing the facilities and determining the cost which the facility receives from the customer, in such a way that the player’s profit is maximised.In this thesis, we first sought to...

Distributed Verifiable Computing: Algorithms and Analysis

, M.Sc. Thesis Sharif University of Technology Rahimi, Ali (Author) ; Maddah Ali, Mohammad Ali (Supervisor)

Abstract

Zero knowledge proofs allow a person (prover) to convince another person (verifier) that he has performed a specific computation on a secret data correctly, and has obtained a true answer, without having to disclose the secret data. QAP (Quadratic Arithmetic Program) based zkSNARKs (zero knowledge Succinct Non-interactive Argument of Knowledge) are a type of zero knowledge proof. They have several properties that make them attractive in practice, e.g. verifier's work is very easy. So they are used in many areas such as Blockchain and cloud computing. But yet prover's work in QAP based zkSNARKs is heavy, therefore, it may not be possible for a prover with limited processing resource to run...

Cracked Rotors Modeling for Vibration Analysis and Control

, Ph.D. Dissertation Sharif University of Technology Ebrahimi, Ali Reza (Author) ; Behzad , Mehdi (Supervisor) ; Meghdari, Ali (Supervisor)

Abstract

The main aim of this thesis is to develop a mathematical model for vibration analysis of cracked rotors. This model should be a simple and precise model for prediction of the cracked rotor vibration behavior and suitable for vibration control. In order to create such model, the pure bending of a cracked beam is analyzed at first. This analysis is performed for two different orientations of the crack with respect to the beam and the bending vector. In this section a continuous bending model with continuous model for crack is developed which can predict the full deformation of the cracked beam in bending and can estimate the stress distribution in the beam with good approximation. Comparison...