Sharif Digital Repository

In this project, the photoelectrochemical properties of ZnO nanostructures modified by CdS and Graphene was studied. Firs, titanium foil was cut into rectangular shape with 1cm width and 3 cm length, cleaned by rinsing in acetone and ethanol and annealed at 4000C for an hour. As a result, a thin layer of titanium oxide was formed on Ti sheet. Then a layer of grapheme oxide was deposited on substrate using Electrophoretic deposition (EPD). After that, ZnO nanostructure was deposited on the TiO2 substrate using Electropulsation (EP) with 20 consecutive pulse followed by 3 minutes Electrodeposition (ED). Using SEM analysis, the morphology of ZnO was determined to be nanopetals in which the... 

This project investigates the effect of plasma on diffusion flame. A Dielectric Barrier Discharge (DBD) plasma actuator has been used to generate plasma, which converts fuel-air non-premixed mixtures into plasma. Then, the effect of plasma on the shape and stability of the diffusion flame composed of fuel and air mixture has been evaluated. This study investigates the laminar flow regime for low calorific value fuels. For this purpose, natural gas fuel (urban methane) has been diluted with N2 and CO2 gases to reduce its calorific value. Then, the diffusion flame is formed from the fuel and air mixture in a laboratory stand. This stand consists of two coaxial tubes made of quartz, fuel flows... 

Density currents are occurred as a result of the intrusion of a dense fluid into a fluid with a different density. Density differences are typically caused by the difference in temperature, existence of solution or insoluble material and suspended solids. A special kind of density current is called a turbidity current which is a sediment-laden density current. This is a kind of flow which is driven by the force of gravity on suspended sediment particles that causes an excess fractional density with respect to the surrounding ambient fluid. In this work, the 2-D sediment-laden density current on a sloping surface of the channel is investigated through experiments. The channel is 12 m long,... 

Nowadays environmental issues are of great importance and one of the most paramount issues is the quality of water, because clean water is vital to our existence. Besides different methods for water purification, water quality testing is a useful and needful tool. Traditional methods for determination of water quality parameters are mainly expensive, time consuming and require highly trained staff. In this study, we have described a centrifugal microfluidic platform (Lab- on – a- CD) for simultaneous determination of different physical and chemical parameters including Nitrite, Free Chlorine and pH. All of the processes from sample injection to detection are integrated on this low-cost and... 

Nowadays, cancer, which has been mentioned as the disease of the century, is the second leading cause of death throughout the world, and its incidence is constantly increasing. Isolation of circulating tumor cells is one of the most critical steps in diagnosing and controlling cancer progression. Due to the rarity of cancer cells compared to other cells in the blood sample, the isolation process requires optimal and high-precision devices. With the advent of inertial microfluidics, the ability to control the particles movement, the processing of blood samples as quickly and accurately as possible, and the viability of cells with a high percentage, introduced microfluidic systems as a... 

The prediction of deposition efficiency of submicron particles in the pulmonary alveoli has received special attention due to its importance for drug delivery systems, and for assessing air pollutants health risks. In this work, the pulmonary alveoli of a healthy human are idealized by a three dimensional honeycomb like configuration and a fluid-structure interaction analysis is performed to study the normal cyclic breathing hydrodynamics. A viscoelastic model is used for the mechanical behavior of alveolar wall tissue. In contrast to previous works in which the inlet flow rate is predefined, in this model a negative pressure is imposed on the outside surface of the alveolus which causes air... 

An acinus is defined as the complex of airways supplied by one first order respiratory or transitional bronchiole. In this part, the replenishment of oxygen at the alveolar surface occurs by a combination of convective air flow with diffusion of oxygen in the air. So for studying gas exchange in the lung, modeling gas species transport and exchange in an acinus is important. Due to lacking direct measurements of the distribution of oxygen (or carbon dioxide) concentration in the acinus, several mathematical models have been developed and studied by numerical simulations. But in none of them the influence of breathing pattern and the role of blood flow in restricting the gas exchange rate have... 

Reduction ships resistance is the major issues that always been about moving the ship into a water. In the course of research, many scientists have been interest to resistance reduction. It is important protect the body of ship against damage caused by sticking marine algae and crustaceans as protection against corrosive agents. Marine organisms such as algae, crustaceans and bacteria stick on submerged surfaces and increase the ship resistance. In this thesis resistance reduction using coating is evaluated. Foul release paint make smooth surface and low surface energy therefore ship with foul release coating experience lower drag contrast ship with another coating in the unfouled condition.... 

The present study examines both Direct Current (DC) and Alternating Current (AC) electroosmotic flows in a parallel plate microchannel. The method consists of a central finite difference scheme for spatial terms and a forward difference scheme for the temporal term. Asymmetric boundary conditions are assumed for Poison-Boltzmann equation used to determine the electric double layer (EDL) potential distribution. The potential distribution is then used to evaluate the velocity distribution for both DC and AC electroosmotic flows. The velocity distributions are obtained by applying slip boundary conditions on the walls to account for probable hydrophobicity of the surfaces. After determining the... 

In positioning and navigation, Sonar with utilization of sound waves in water environments is similar to the role of Radar in not watered (irrigated) environments. In the Sonar field, modeling and simulation of propagation of sound waves in the undersea environment is a fundamental and very important topic. Nowadays simulation is significant tool that allow to the researchers to predict the quality of Sonar function respect to the experimental conditions. For simulation and modeling of sound wave propagation are used two different methods; Wave theory and Ray theory. In the wave theory, because of the large volume of data, the interpretation of the results is hard. Also in this method cannot... 

In this thesis, the potential flow including unsteady partial cavitation around axisymmetric bodies are studied using a boundary element method (BEM) based on potential theory. For this purpose the wetted surface of the body and cavity surface are divided (approximated) to panels. Then, by applying the Green’s third identity and expressing this theory in potential flow around every surface, cavitation can be modeled by distributing the source and the dipole rings on cavity/body surface. In order to approaching this goal we introduced dipole rings distribution on the cavity and body surfaces and source rings distribution on the cavity surface. In this work the cavitation number is assumed to... 

Atherosclerosis is one of the most important and common causes of death in the world. Atherosclerosis typically affects medium and large arteries in the body and it leads to plaque formation in arterial wall. The first stage of plaque formation has been related to accumulation of low density lipoproteins in arterial wall.
The purpose of this research is presenting a four-layer model to describe the LDL transport in the arterial wall. The endothelium, intima, internal elastic lamina (IEL) and media are all treated as macroscopically homogeneous porous media and the volume-averaged porous media equations are employed to model various layers. The physiological parameters within the various... 

Nowadays providing services beyond the expected performance of users has become the most competition among telecommunication companies. Increase data rate at which a user is able to use a wireless system, you know that most of these companies are competing with each other. However, due to limited power to be sent to a transmitter, the first proposal to increase the data rate of wireless data transmission has a wider bandwidth. This results in increased bandwidth demand and thus sales by the government. During these years, many researchers have tried to increase efficiency in the use of broadband transceiver. These systems due to the wide band signal transmission and high-resolution mass... 

In this research, we consider the problem of guarding orthogonal polygon with sliding cameras. This problem is originated from the well-known Art Gallery problem. In the Art Gallery problem the goal is to guard the polygon with minimum number of guards. Each guard is considered as a point and can guard all the points inside the polygon that are in its visibility area. In sliding camera version, each guard is modeld as a horizontal or vertical segment which is entirely in the polygon. The guarding area of each camera is defined by its segment and its power. In 0-transmitter model, the guarding area of each camera is limited by the edges of polygon, but in the k-transmitter model cameras can... 

Nowadays, reaching higher speed in marine crafts and underwater vehicles mostly requires a modern propulsor with high efficiency and enhanced cavitation performance. Because of these requirements, numerous researches for developing the existing propulsion systems and invention of new systems have been conducted in recent years. One of the most sophisticated and developed propulsion systems that have high hydrodynamic efficiency and high cavitation performance and low acoustic signature is pumpjet. This propulsor contains a rotor, stator and a duct that surrounds two other parts. Stator reduces the swirl of flow coming from rotor and thereby reduces the loss of energy. High cavitation... 

Aphron drilling fluids or CGA fluids are the wellknown updated drilling fluids in recent years.this kind of drilling fluids can control the mud loss into the formation and thus reduce formation damage and drilling costs. its structure consists of two phase fluid (gas and liquid) that the aphrons are the micro bubbles with 10 to 100 micrometer diameter that have strong stability in liquid phase compared to foamy drilling fluids. Generally aphron drilling fluids are made of base drilling fluid and surfactants, for more stability, mixed surfactant-polymer additive is so beneficial. in the last two decades, the Lattice-Boltazmann method is introduced for computational fluid dynamic area and... 

The purpose of this study is extracting a dynamic model of longitudinal motions of high speed catamaran in regular and irregular waves, and then motion control of vessels by using of foil control elements and interceptor. For simulating longitudinal motions in regular waves, at first the longitudinal hydrodynamic coefficients of vessels should be extracted, then by substituting extracted coefficients in cumminz equation and using system identification methods, some equations are presented to estimate longitudinal two degree of freedom motions of high speed catamaran in waves. In this thesis the extraction of hydrodynamic coefficients is based on both numerical and experimental methods. ANSYS... 

Partially submerged propellers are new type of propellers which knowledges ragard them is limited. These propellers found a growing market ahead of them and expertsexpect to use these propellers for big vessels at high speeds. This type of propulsors do not lose their efficiences at high speeds and are assumped to be economical. Meanwhile due to continuosus hit to water surface, huge stresses are extered on tha blade witch needs to be fundamentally studied. Several researchers have studied the partially submerged propellers which unfortunately did not publish their results. Undergo less or more thrust and torques which in both cases the efficiency also increases. The use of numerical methods... 

High speed crafts due to their design, geometry, one of the parameters to improve the performance of hydrodynamic elements such as trim tabs, bow thruster, steps and Spray rails.Step is an element which change height of bottom and due to reduce wetted area and extra lift and finally cause to improve drag of vessel.In this thesis we have evaluated numerically and compared with experimental tests on planning crafts in calm water and waves, and the effects on the motions of floating and drag floating are compared.Numerical analysis is conducted to help Ansys.CFX software. First, to provide 2D modeling and analyzing real-bodies floating in calm water and waves with simple, step-paid. The... 

Morphology and alignment of endothelial cells (ECs) have great influence on plaque formation. These alignments are based on the cyclic strains and wall shear stress (WSS) on the arterial wall. In the present study, cyclic strains and WSS are investigated to predict the secondary plaque locations downstream of the primary stenosis. Therefore, left coronary artery (LCA) with its branches to left anterior descending (LAD) and left circumflex (LCX) are 3D located on a virtual sphere to consider the cardiac motion. Stenoses are placed at the beginning of the bifurcation with varying degrees from 40% to 70% based on diameter reduction. Healthy coronary is also constructed to compare with those of...