Loading...
Search for:
novin--mohammad
0.097 seconds
Total 5397 records
Design and Implementation of EOG Wearable Sensor
, M.Sc. Thesis Sharif University of Technology ; Fakharzadeh, Mohammad (Supervisor)
Abstract
This thesis is in the field of electroulography sensor technology and with the main goal of designing and manufacturing electroulography sensor for use in various applications including human-machine communication and biomedical technology. The research method used includes a comprehensive review of the existing literature to understand the current state of this technology and to identify its major advances and shortcomings. In the next step, an experimental approach is chosen to evaluate the performance of the sensor in recording and interpreting electrical signals related to biological processes, which includes the design and execution of controlled experiments using prepared biological...
Spatial-temporal Variation of Urmia Lake Basin Using Artificial Intelligence Algorithms
, M.Sc. Thesis Sharif University of Technology ; Torkian, Ayoub (Supervisor)
Abstract
Water shortages resulting from macro-environmental climate changes as well as local inefficient agricultural practices and dam constructions activities have resulted in the gradual reduction of water level in Urmia Lake, located in the northwest of Iran. As such, restoration efforts were initiated to prevent further adverse impacts exacerbating the conditions and creating secondary problems such as regional salt dust generation and dispersion, resulting in health issues for the greater area population in the neighboring vicinities. The utilization of advanced forecast modeling based on deep learning algorithms can assist the authorities to manage better multi-dimensional issues affecting the...
Design and Analysis of Low-Power VLSI Clock Distribution Networks, Considering Process Variations
,
M.Sc. Thesis
Sharif University of Technology
;
Sarvari, Reza
(Supervisor)
Abstract
The Technology scaling and reduction of the size of transistors has led to an increase in the switching speed and, as a result, to an increase in the clock frequency.But in recent years, the continuation of this process of increasing the clock frequency has been almost stopped considering the considerations of power consumption. Previous research has shown that approximately 30-50% of the dynamic power consumed by the microprocessor is wasted in the clock distribution network.Therefore, the design of clock distribution networks is a big challenge for future microprocessors due to the trend of Technology scaling and process variation. In this thesis, we used the emerging technology of...
Security Evaluation of Deep Neural Networks in the Presence of an Adversary
, M.Sc. Thesis Sharif University of Technology ; Jalili, Rasool (Supervisor)
Abstract
There has been a noticable surge in the usage of machine learning techniques in various fields, such as security related fields. With this growing pace of using machine learning to solve various problems, securing these models against attackers has become one of the main topics of machine learning literatures. Recent work has shown that in an adversarial environment, machine learning models are vulernable, and attackers can create carefully crafted inputs to fool the models. With the advent of deep neural networks, many researchers have used deep neural networks for the task of malware detection, and they have achieved impresive results. Finding the vulnerlabilities of these models is an...
Collision-free path planning of a novel reconfigurable mobile parallel mechanism
, Article International Conference on Robotics and Mechatronics, ICROM 2015, 7 October 2015 through 9 October 2015 ; 2015 , Pages 389-394 ; 9781467372343 (ISBN) ; Kazemi, H ; Masouleh, M. T ; Novin, R. S ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2015
Abstract
This paper initially deals with the design of a new customized reconfigurable mobile parallel mechanism. This mechanism is called "Taar Reconfigurable ParaMobile (TRPM)", consisting of three mobile robots as the main actuators. Then, the kinematics and path planning for this mechanism are represented. The newly proposed mechanism is expected to circumvent some shortcomings of inspection operation in unknown environments with unexpected changes in their workspace, e.g., in a water pipe with non-uniform section area. In this paper, "Artificial Potential Field (APF)" has been assumed to be the path planning algorithm and its resulting attractive and repulsive forces are only applied to the...
Path planning of 3-RRR parallel robot by avoiding mechanical interferences via Artificial Potential Field
, Article International Conference on Robotics and Mechatronics, ICROM 2015, 7 October 2015 through 9 October 2015 ; 2015 , Pages 240-245 ; 9781467372343 (ISBN) ; Porshokouhi, P. N ; Masouleh, M. T ; Novin, R. S ; Sharif University of Technology
2015
Abstract
This paper deals with the collision-free path planning of planar parallel robot by avoiding mechanical interferences and obstacle within the workspace. For this purpose, an Artificial Potential Field approach is developed. As the main contribution of this paper, In order to circumvent the local minima problem of the potential fields, a novel approach is proposed which is a combination of Potential Field approach, Fuzzy Logic and also a novel algorithm consisting of Following Obstacle as well as Virtual Obstacle methods, as a hybrid method. Moreover, the inverse kinematic problem of the 3-RRR parallel robot is analyzed and then the aforementioned hybrid method is applied to this mechanism in...
Modification of fretting fatigue behavior of AL7075-T6 alloy by the application of titanium coating using IBED technique and shot peening
, Article Tribology International ; Volume 42, Issue 1 , 2009 , Pages 121-129 ; 0301679X (ISSN) ; Nemati, J ; Novin Rooz, A. J ; Farrahi, G. H ; Sharif University of Technology
2009
Abstract
In this work, improvement in fretting fatigue life of AL7075-T6 has been investigated by titanium surface coating using ion-beam-enhanced deposition (IBED) technique and shot peening. From the experiments, the following conclusions were derived: (i) Shot peening increased the fretting fatigue life up to 350%. (ii) Titanium coating increased the fatigue life up to 100% with respect to virgin specimens for low working stresses, while it reduced the fatigue life at higher working stresses significantly. (iii) Titanium coating+shot peening increased the fatigue life up to 130% with respect to the virgin specimens for low working stresses, while it reduced the fatigue life at higher working...
The effect of foamed cement nanocomposite as counter electrode on the performance of dye-sensitized solar cell
, Article International Journal of Applied Ceramic Technology ; Volume 20, Issue 6 , 2023 , Pages 3596-3607 ; 1546542X (ISSN) ; Ahmadi, K ; Abdolahzadeh Ziabari, A ; Novin Vajari, S ; Omidtabrizi, F ; Sharif University of Technology
John Wiley and Sons Inc
2023
Abstract
Improper interparticle connection between carbon-based materials, poor interface bonding between the carbon counter electrodes (CEs) and substrate, and low surface area are the main limitations of carbon-based CEs in dye-sensitized solar cells. In this study, we utilized foamed cement and binder for adherence and surface area improvement in carbon-based CEs, such as graphite, multi-walled carbon nanotubes, and carbon black (CB). The results revealed that incorporating foamed cement into carbon materials improved the resistance, short-circuit current density, fill factor, and power conversion efficiency of the device. The porous cement/CB nanocomposite CE with a photoconversion efficiency of...
Construction of an Experimental Device for Foaming Agent and an Experimental Study of the Properties of Foaming Agent
, M.Sc. Thesis Sharif University of Technology ; Bazargan, Mohammad (Supervisor)
Abstract
The primary purpose of acidizing operations in the oil and gas industry is to enhance hydrocarbon production. Acidizing has been a common and conventional method for years, especially when production engineers face issues like declining reservoir pressure leading to reduced production rates. Initially, the treatment solution is referred to as matrix acidizing. In acidizing operations, different additives are combined with the acid to control its behavior in the reservoir. These additives may include iron control agents, corrosion inhibitors, friction reducers, and more. Incompatibility among these additives, the acid, and reservoir fluids can lead to severe damage to the reservoir....
Numerical Analysis of An Annular Gas Turbine Combustor
, M.Sc. Thesis Sharif University of Technology ; Farshchi, Mohammad (Supervisor)
Abstract
The goal of this research is the simulation of the annular combustion chamber of the turbine engine utilized by liquid fuel. The achievement to this goal will lead to create numerical tools for parametric study, analysis and combustion chamber designing.For this reason simple geometry has been considered. This simplicity of geometry causes to facilitate in parametric study and decrease in saving time for modeling and meshing. This combustion chamber is a simplified model of engine CF6. In recent study, the k – ε realizable model has been used for turbulence modeling. For non-adiabatic condition, chemical reaction is dissolved by utilizing probability density function along with laminar...
A misbehavior‐tolerant multipath routing protocol for wireless Ad hoc networks [electronic resource]
, Article International Journal of Research in Wireless Systems (IJRWS) ; Vol. 2, Issue 9, pp. , Sep. 2013 ; Pakravan, Mohammad Reza ; Aref, Mohammad Reza ; Sharif University of Technology
Abstract
Secure routing is a major key to service maintenance in ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. As a result of the resource limitations in such networks nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a novel data redirection method to mitigate the impact of node misbehavior on network...
Theoretical and Experimental Study to Conversion of AUC to UO2 by Microwave Heating
, Ph.D. Dissertation Sharif University of Technology ; Otukesh, Mohammad (Supervisor) ; Ghannadi Maragheh, Mohammad (Co-Advisor) ; Ghasemi, Mohammad Reza (Co-Advisor)SAR Imaging Using the TomoSAR Technique to Resolve Multiple Scatterers
, M.Sc. Thesis Sharif University of Technology ; Bastani, Mohammad Hassan (Supervisor) ; Karbasi, Mohammad (Co-Supervisor)
Abstract
During the last few years, the study of urban environment structures is considered as a research field of interest in remote sensing. In satellite observations of the earth's surface, continuous imaging in terms of time and space has caused the remote sensing technique to be proposed as a useful and efficient tool for the analysis of urban areas. Obtaining quantitative spatial information from the urban environment in fields such as determining the height of buildings plays an essential role in urban planning, monitoring damage to buildings, establishing communication bases and digital cities. During the last two decades, the use of Tomosar approach in order to reconstruct the structures of...
Estimating Possible Effects of Subsidies in Competition and Development of Fixed Broadband Internet
, M.Sc. Thesis Sharif University of Technology ; Vesal, Mohammad (Supervisor) ; Rahmati, Mohammad Hossein (Supervisor)
Abstract
In this work, the dynamic competition between firms providing internet services is studied. The framework is Markov equilibrium whereby structural parameters are obtained using two-step estimations, allowing for analyzing the situation in case of subsidies for service upgrade. The results show that such subsidy has little effect on the number of firms while increasing the number of fast firms
Estimating Price Elasticity of Natural Gas Demand in Iran's Residential Sector: A Regression Discontinuity Approach
, M.Sc. Thesis Sharif University of Technology ; Rahmati, Mohammad Hossein (Supervisor) ; Vesal, Mohammad (Supervisor)
Abstract
Estimating the price elasticity of gas demand involves complexities depending on the gas market structure and pricing mechanisms in different countries. Distinguishing between supply and demand shocks and block pricing are among the main challenges that can cause endogeneity in elasticity estimates. Iran's domestic gas network, one of the largest and most extensive household gas markets, is divided into five climatic zones based on weather conditions. The pricing steps for these five climates during the five cold months are such that a customer in a warmer climate pays higher prices. Conversely, the pricing steps for the seven warm months are the same for all climates. This policy creates a...
Estimate the Effect of Religiosity on Voter Turnout
, M.Sc. Thesis Sharif University of Technology ; Rahmati, Mohammad Hossein (Supervisor) ; Vesal, Mohammad (Supervisor)
Abstract
The correlation between religious adherence and voter turnout is widely studied. However, whether the relation is causal is an open question. We use Household Expenditures and Income Survey (HEIS) data in Iran, which encompasses nine distinct religious expenditures. These expenditures have low correlation with each other and represent different aspects of religious adherence. We use Imamzadeh (some historical holy shrines) as Instruments to estimate the causal effect of religious expenditures on voter turnout. The results reveal that religious expenditures influence both presidential and parliamentary voter turnout, with a notably stronger impact on presidential elections
Joint Optimization of Computation Offloading and Resource Allocation in Mobile Edge Computing Networks
, M.Sc. Thesis Sharif University of Technology ; Pakravan, Mohammad Reza (Supervisor) ; Hadi, Mohammad (Co-Supervisor)
Abstract
Mobile edge computing (MEC) is a promising technology that aims to resolve cloud computing’s issues by deploying computation resources at the edge of mobile network and in the proximity of users. The advantages of MEC include reduced latency, energy consumption, and load on access and mobile core networks, to name but a few. Despite all the aforementioned advantages, the mobility of mobile network users causes the traditional MEC architecture to suffer from several issues, such as decreased efficiency and frequent service interruption. One of the methods to manage users’ mobility is virtual machine (VM) migration, where the VM containing the user’s task is migrated to somewhere closer to...
Non-Scratch, Antibacterial And Self-cleaning SiO2/TiO2 Nano Composite Coating on Surgical Tools By Sol-Gel
, M.Sc. Thesis Sharif University of Technology ; Ghorbani, Mohammad (Supervisor)
Abstract
In this study TiO2/SiO2 thin films were prepared by sol-gel method from Tetra isopropylortho Titanate(TIPT) as the principle of TiO2 material with Tera ethoxysilane(TEOS) as the principle of SiO2 material to achieve high scratch-resistant , antibacterial and self-cleaning surface area under the effect of various percentage of SiO2 . Film deposition was carried out using a dip-coating technique and heat-treatment was used at 700ºC to achieve crystalline of films with excellent adherence the of substrate.
The surface morphology of the films has been observed by Scanning Electron Microscope (SEM) and the tribological properties of the surface were investigated by Atomic Force Microscope...
The surface morphology of the films has been observed by Scanning Electron Microscope (SEM) and the tribological properties of the surface were investigated by Atomic Force Microscope...
Simulation and Control of an Aromatic Extractive Distillation Column
,
M.Sc. Thesis
Sharif University of Technology
;
Shahrokhi, Mohammad
(Supervisor)
Abstract
In this study steady state and dynamic simulation of an NFM extractive distillation unit for seperation of aromatics and non-aromatic components has been carried out. Column output composition obtained with experimental binary coefficients is compared with those obtainded by UNIFAC equation. The results indicate that using UNIFAC for all binrary coefficients results in an unacceptable error in concentration of benzene. If the experimental binary coefficents of benzene with NFM are used and the rest are calculated by UNIFAC equation, the simulation results will be very close to those obtained via experimental binary coefficients. Also it is shown that considering a constant efficiency for all...
Investigation the Effects of Parking Pricing and Improving Public Transportation Policies on Private Car Use Reduction in Central Business District
, M.Sc. Thesis Sharif University of Technology ; Kermanshah, Mohammad (Supervisor)
Abstract
Nowadays, with population growth and vehicle traffic increase, only providing transportation supply couldn’t answer the transportation demand. One of the most important solutions to reduce traffic is transportation demand management (TDM). In this research, the effects of parking pricing and improving public transportation services on private car demand reduction in city center are examined. The data are collected from private cars users in the city center of Isfahan through interviews. By stated preference method, the impacts of parking price and public transit travel time and other related factors were investigated. For this purpose, binary logit, multinomial logit and nested logit models...