Loading...
Search for:
orshesh--ziba
0.078 seconds
Evaluation of The Effect of Molecular Weight, Mixing Approach and Compatibilizer on Morphologhy and Mechanical Properties of PP/PA/Clay Nanocomposite
,
M.Sc. Thesis
Sharif University of Technology
;
Bagheri, Reza
(Supervisor)
Abstract
Polypropylene/clay nanocomposites are considered as a group of widely used nanocomposites in industrial applications due to their desired properties, yet reasonable cost. However, dissimmilar chemical nature of polypropylene and clay do not allow perfect dispersion of silicate layeres in the matrix and thus restricts full advantages of these composites.An earlier investigation in this group considered solving this shortcoming through incorporation of PA6 as an intermediate phase to enhance clay platelets dispersion. The current project follows this route via studing the influence of molecular weight of the PP matrix, compatibilzer and the mixing procedure of the compound. To investigate the...
Numerical Study of Oxygen Enrichment on NO Pollution Spread in an Ignition Chamber
, M.Sc. Thesis Sharif University of Technology ; Kazemzadeh Hannani, Siamak (Supervisor)
Abstract
In the present study, a 3D combustion chamber was simulated using FLUENT6.32. The objectives were to obtain detailed information on the combustion characteristics and NO formation in the furnace, and also to examine the effect of Oxygen enrichment on the combustion process. The combustion chamber has internal dimensions of 60 cm wide, 90 cm high and 190 cm long. The fuel pipe diameter is 1.25 cm and the air pipe diameter is 3.5 cm. The 3-D Reynolds Averaged Navier Stokes (RANS) equations together with standard k-ε turbulence model are solved by Fluent 6.3. Air/fuel flow rate ratio is varied as 1.3, 3.2 and 5.1 and the oxygen enriched flow rates are 28, 54, 68 lit/min. NO emission was...