Sharif Digital Repository

This paper presents the results of a thorough power quality analysis in order to determine the cause of failure in a Compressed Natural Gas (CNG) distribution transformer. The paper presents the field data and determines power quality indices of such loads based on IEEE/IEC standards. It provides steady state time-series parameters as well as transient waveforms. Different signatures of the voltage and current signals are extracted, and consequences of the distortions are described. The analysis is clarified by presenting both time domain captured waveforms and statistical power quality indices. Optimum solution for improving power quality and prevent component failure is also proposed. ©... 

Background: Diabetes is associated with many pathological changes and one of the most important consequences of the diabetes is hepatic injury. The present study was performed to investigate the effect of eight weeks endurance training with consumption of cinnamon supplementation on plasma concentrations of liver enzymes,alanine aminotransferase (ALT) and aspartate aminotransferase (AST) in women with type II diabetes. Methods: In this quasi-experimental study,36 female volunteers with type II diabetes (age 52.72±2.64 years and body mass index 29.28±2.94 Kg/m2) were participated. The subjects were homogenized regarding their body mass index and then were divided randomly into four groups... 

Background: One of the negative effects of cardiac sympathetic hyperactivity is pathologic hypertrophy. Recent studies have indicated that large tumor suppressor (LATS) is one of the molecules which play a critical role in cardiomyocyte apoptosis. Considering the preventive role of exercise training, we evaluated the effects of endurance training on LATS gene expression and its upstream pathway in the present study. Methods: Eighteen male Wistar rats were randomly divided into 2 groups: Endurance and control. Endurance training was performed for 8 weeks, 1 hour per day, and 6 days per week on the treadmill at a 15° inclination. Pathologic hypertrophy was induced with the injection of 3... 

Mine tailings are the most common materials that are used in construction of tailings dams. Due to high level of environmental hazard and serious consequences that are associated with tailings dam failure, proper design of tailings dams is an important factor in mining industry. Water level fluctuation, change in permeability of dam foundation, seismic loads, and excessive settlements are the most common reasons of failure, particularly in upstream type tailings dams. Due to low shear strength of wet tailings, drying of tailing material is very common in practice during the dam construction. In hot climate, the received solar energy at the soil surface converts to soil heat flux, air heat... 

Effect of using Al 2O 3-water nanofluids with different volume fractions and particle diameters on generated entropy, hydrodynamic performance and heat transfer characteristics of a tangential micro-heat sink (TMHS) was numerically investigated in this research. Results indicated that considerable heat transfer enhancement is possible when using Al 2O 3-water nanofluids as coolant and clearly the enhancement improves with increasing particles concentration and decreasing particles size. However, using nanofluid has also induced drastic effects on the pumping power that increases with particles volume fraction and Reynolds number. Finally, it was found that generated total entropy decreases... 

Body weight is influenced by both food intake and energy expenditure. Acylated ghrelin enhances appetite, and its circulating level is suppressed by Growth Hormone. Data on the acylated ghrelin responses to exercise of different intensities in obese individuals are currently not available. This study examined the effects of an intermittent exercise protocol on acylated ghrelin levels and hunger ratings in obese people. Nine inactive male ran on the treadmill at 0900 with progressive intensities of 50, 60, 70, and 80% of VO2max for 10, 10, 5, and 2 min respectively. Blood samples were collected before the exercise at 0845 (-15 min as the resting values), after each workload (10, 23, 31, and... 

In this research, the problems of adiabatic film-cooling the flat, convex, and concave surfaces are investigated numerically. Two different radii of curvature and one row of vertical injection holes are considered. The Navier-Stokes equations are solved using a fine nonuniform multiblock staggered curvilinear grid and the SIMPLE-based finite volume method. The blowing rates are 0.5 and 1.0 and the mainstream Reynolds number is 10,000. The obtained results indicated that at a low blowing ratio, the cooling effectiveness enhances over the convex surface and reduces over the concave surface compared to the flat surface case. In comparison with the low blowing ratio, the curvature effects at a... 

Seismic isolators are used to decrease the energy and forces of earthquakes. The weight of conventional steel-reinforced elastomeric isolators (SREIs) is high, mostly due to the use of multiple steel shim plates. On the contrary, the damping ratio of SREIs is relatively low. Accordingly, this research utilizes a new approach in which the steel shim plates are replaced by carbon and polyamide fibers. This study attempts to obtain the dynamic and mechanical properties of such carbon fiber- and polyamide fiber-reinforced elastomeric isolators, in comparison with SREIs. In this work, a number of specimens were initially designed and manufactured. Afterwards, compression and cyclic shear tests... 

A size-dependent, explicit formulation for coupled thermoelasticity addressing a Timoshenko microbeam is derived in this study. This novel model combines modified couple stresses and non-Fourier heat conduction to capture size effects in the microscale. To this purpose, a length-scale parameter as square root of the ratio of curvature modulus to shear modulus and a thermal relaxation time as the phase lag of heat flux vector are considered for predicting the thermomechanical behavior in a microscale device accurately. Governing equations and boundary conditions of motion are obtained simultaneously through variational formulation based on Hamilton's principle. As for case study, the model is... 

Functionally graded materials (FGMs) have been introduced to significantly reduce the temperature and thermal stresses on structures at severe thermal loading. Design and development of FGMs as the heat treatable and energy-absorbing materials for high-temperature and thermal protection systems requires understanding of exact temperature and thermal stress distribution, in order to optimize their resistance to failure. In this study, transient temperature and associated thermal stresses in a functionally graded slab symmetrically heated on both sides are determined by separation of the variables scheme. This method is applied to the heat conduction equation in terms of heat flux for... 

Single-crystal hydroxyapatite (HAp) nanorods and nanogranules have been synthesized successfully by a mechanochemical process using two distinct experimental procedures. The experimental outcomes are characterized by transmission electron microscopy (TEM), and powder X-ray diffraction (XRD) techniques. In this work, the feasibility of using polymeric milling media to prepare hydroxyapatite nanoparticles is described. The resulting hydroxyapatite powder exhibits an average size of about 20 to 23 nm. Final results indicate that the proposed synthesis strategy provides a facile pathway to obtain single-crystal HAp with high quality and suitable morphology. © 2008 Elsevier B.V. All rights... 

An imprinted interpenetrating polymer network (IPN) was synthesized and used as a medium for isolation of carbamazepine from urine samples. The polymer network consisted of a homogeneous polystyrene–sol gel hybrid constructed by in–situ radical polymerization method. In this process, within the sol–gel reaction duration, styrene monomer could penetrate into the reaction mixture and after the polymerization initiation, a monolithic IPN structure was prepared. The scanning electron microscopy (SEM) image and energy dispersive spectroscopy (EDX) are indications of the polystyrene dispersion at nano- to micro-meter level in the sol gel matrix. Eventually, the synthesized IPN was used as a... 

Application of construction and demolition (C&D) wastes were considered as sustainable development goals (SDGs) for maintaining raw materials. Also, lightweight concretes such as aerated autoclaved concrete (AAC) were used for partitioning spaces in the building industry. Moreover, the waste products of the mentioned materials were increased due to the rise of old construction demolitions. This study contributes a calcinated aerated autoclaved concrete (CAAC) which is efficient, powerful, highly rapid, non-expensive and novel adsorbent for the removal of cationic dyes including malachite green (MG), methyl violet (MV) and methylene blue (MB) form water samples. The impacts of different... 

Application of construction and demolition (C&D) wastes were considered as sustainable development goals (SDGs) for maintaining raw materials. Also, lightweight concretes such as aerated autoclaved concrete (AAC) were used for partitioning spaces in the building industry. Moreover, the waste products of the mentioned materials were increased due to the rise of old construction demolitions. This study contributes a calcinated aerated autoclaved concrete (CAAC) which is efficient, powerful, highly rapid, non-expensive and novel adsorbent for the removal of cationic dyes including malachite green (MG), methyl violet (MV) and methylene blue (MB) form water samples. The impacts of different... 

Background: Body weight is regulated by both food intake and energy expenditure. Ghrelin, a hormone produced by the stomach and pancreas, enhances appetite. This study was undertaken to determine the effects of intermittent treadmill running on acylated ghrelin and appetite in individuals with obesity. Methods: Nine inactive male students, with a mean age of 20.56±0.48 yrs, a body mass index of 32.68±0.84 kg/m2 and a maximum oxygen uptake of 34.21±1.48 ml/kg/min, participated in the study in two trials (control and exercise) in a counterbalanced, randomized design. The protocol included intermittent running with a constant intensity at 65% of VO2 max on a treadmill. Blood samples were... 

Unlike gold and silver, aluminum shows a localized surface plasmon resonance (LSPR) over a wide spectral range from ultraviolet (UV) to the visible region. Herein, we demonstrate a new process to optically couple TiO2 nanotubes (NTs) with a high-strength aluminum substrate, to achieve a synergistic enhancement of photocatalytic antibacterial effects through controlled LSPR of aluminum. The high-strength aluminum substrate was produced by tubular channel angular pressing (TCAP). Their LSPR was tailored through the formation of superficial nano-concave arrays (NCAs) with desired concave diameters. A layer of aligned TiO2 NTs was fabricated on the surface of aluminum nano-concave arrays (Al... 

This paper presents a dry mechanochemical process to produce hydroxyapatite (HAp) nanoparticles. Two distinct chemical reactions are introduced to prepare HAp powders using milling process. Structural and morphological properties of the obtained materials are studied by X-ray diffraction and transmission electron microscopy. The results reveal that the single crystal HAp nanoparticles have been successfully produced in metallic and polymeric vials through two different experimental procedures. Tempered chrome steel and polyamide-6 materials are adopted as the metallic and polymeric vials respectively. Nanoellipse, nanorod and nanosphere powders are obtained in these experimental procedures.... 

This paper studies a simultaneous weekly assignment and scheduling decisionmaking problem in operating theaters with elective patients. Because of limited recourses in hospitals, considering assignment and scheduling decisions simultaneously can help mangers exploit the available resources more efficiently and make the work-load uniformly distributed during the planning horizon. This procedure can significantly reduce hospital costs and increase satisfaction of patients and personnel. This paper formulates the mentioned problem as a Mixed Integer Linear Program (MILP) considering applicable assumptions like finite recovery beds and limitation of equipment. Since the problem is NP-hard, in... 

In this paper, the ball valve performance is numerically simulated using an unstructured CFD (Computational Fluid Dynamics) code based on the finite volume method. Navier-Stokes equations in addition to a transport equation for the vapor volume fraction were coupled in the RANS solver. Separation is modeled very well with a modification of turbulent viscosity. The results of CFD calculations of flow through a ball valve, based on the concept of experimental data, are described and analyzed. Comparison of the flow pattern at several opening angles is investigated. Pressure drop behind the ball valve and formation of the vortex flow downstream the valve section are also discussed. As the... 

Rank aggregation, that is merging multiple ranked lists, is a pivotal challenge in many information retrieval (IR) systems, especially in distributed IR and multilingual IR. From the evaluation point of view, being able to calculate the upper-bound of performance of the final aggregated list lays the ground for evaluating different aggregation strategies, independently. In this paper, we propose an algorithm based on dynamic programming which, using relevancy information, obtains the aggregated list with the maximum performance that could be possibly achieved by any aggregation strategy. We also provide a detailed proof for the optimality of the result of the algorithm. Furthermore, we...