Sharif Digital Repository

Today, the pollution of heavy metals in wastewater and surface waters, which is a global environmental problem, has increased with the expansion of various industrial activities. Heavy metals cause serious health problems due to their accumulation in human and animal tissues. Thorium, is a radioactive element with an atomic number of 90 that is widely used in the optics, aerospace, metallurgy and chemical industries, in the manufacture of high-strength alloys, in UV photocells, and especially in the nuclear industry. The primary sources of radioactive wastewater include nuclear power plants, nuclear energy industry research centers, medical institutions, industrial production, universities,... 

Fog computing environment consists of several devices which distribute across an arbitrary topology. Each of these devices is capable of carrying out a designated computation simultaneously with other devices. One of the common ways of describing a computation is through the usage of workflows. Workflow is a flexible and formal way of modeling tasks and their requirements for execution. A workflow is essentially a DAG. Therefore, it can model the data dependency between tasks quite accurately. The complex structure of a workflow in conjunction with the homogenous nature of devices in a fog environment makes it difficult to find a resource management algorithm to minimize execution time, used... 

This project focuses on the design of fuel drop tanks for airplanes that add minimal drag and positive lift to the flying object. This will obviously effect the stability and dynamic performance of the airplane. To reduce adverse dynamic effects the tank was divided to several segment with a special emptying sequence. The add-on tank has to have no interference with the object existing systems and require minimum structural changes in the object. Several designs were proposed and the one gaining highest marks was selected. The flow field and the dynamic behavior of combined vehicle and drop tanks were studied using FE simulations. The result shows that adding a drop tank with optimized... 

Nuclear power is a prominent alternative of fossil fuels that can effectively solve global warming, acid rains and other consequences of air pollutions, caused by combustion. Despite such obvious advantage, this highly compact form of energy suffers from a big problem corresponding to its nuclear waste. Graphene oxide (GO), a lamellar material with wide range of surface functional groups such as epoxy (C-O-C), hydroxyl, and carboxyl offers large surface area as well as high sorption capacity for the metallic cations. This thesis study presents a supercritical, and co-precipitation synthesis of magnetite- graphene oxide (M-GO) in which Fe3O4 nanoparticles are simultaneously formed, surface... 

Cancer can be defined as a stochastic phenomenon. Thus, the tumor growth can be defined as a stochastic process. A Cancer tumor can be analyzed by its geometric shape. Furthermore, computing fractal dimension of shapes is a useful technique to analyze chaosity and complexity of shapes. This approach can be used to compare results from laboratory with simulated results of a mathematical model. A stochastic model of tumor growth will be presented. And some geometrical properties will be analyzed through computer simulation of the model  

Iodine isotopes are among the most significant medical radioisotopes with a wide range of applications in therapy and diagnosis. The I-131 isotope is usually synthesized by irradiation of natural tellurium in atomic reactors. But there is an alternative route in which this isotopes is produced along with two other significant medical radioisotopes (i.e. Mo-99, Xe-131) by neutronic irradiation of uranium in the reactors. To separate iodine isotopes especially in the extraction process of fission fragments, it is necessary to be selective adsorption of iodine on a selective adsorbent. One of the most selective adsorbent for this application is copper. The aim of this study is to compare the... 

The effects of combined task demands on the way muscles are recruited to balance external loads during posture and movement is of great importance in quantitative analysis of upper arm function. Pain and disability of shoulder joint is becoming more important as population spends more often interacting with computers in seated position and carrying repetitive tasks using upper extremities. Shoulder joint that is more dependent on the muscles for its normal function than other joints such as hip due to its small articular surface and large range motion has been used here to study its coordination during isometric exertions. Since, the numbers of tasks that could be performed are enormous. In... 

In the present study, the axisymmetric liquid gas/air diffusion flame in the presence of fuel concentration oscillations and velocity perturbations has been investigated experimentally. Several industrial combustions take a place by diffusion mechanism which necessitate scientists to make far better understanding of diffusion flames. In order to study diffusion flames, the instrument with two separated lines of fuel and air has been developed. Nitrogen is used for fuel dilution oscillatory with pulse of 1, 2, and 4 Hz frequencies. The pulse duration effects on flame structure are also studied. The flame shape has been captured by high speed camera and the results are processed by image... 

This research evaluates the effect of external corrosion geometry and bending moment on the burst pressure of pipes. In recent decades, the use of natural resources of offshore oil and gas has increased, as a result, the use of offshore pipelines for transferring products has grown dramatically. At the same time, numerous accidents and explosions in offshore pipelines and its economic and environmental consequences indicates the importance of ensuring safe operation. Pipeline Integrity Management has been developed to ensure safe and efficient operation of pipelines. Integrity management includes planning, inspection, evaluation and repair. This cycle is checked continuously. The importance... 

Burner scaling criteria have been studied and the most appropriate one has been selected to scale down a large industrial burner. The sub-scaled non-premixed swirl-stabilized burner is manufactured to ensure that the available experimental setup and equipment are sufficient and practical for characterizing the burner. The aim of the research is to assist the future design optimization with the identifications which have been done. The constant residence time method is selected in this project and it is shown that this is the proper criteria for non-premixed and swirl-stabilized burners. For better identification, stability maps of the flame are extracted with the experimental methodology for... 

The purpose of this study was to create a three-cationic electro phosphate coating of zinc-nickel-manganese by cathodic method and to investigate the effect of operating variables on the properties of zinc-nickel-manganese tri-cationic electro phosphate coating. Hence, the effects of variables such as coating acidity, coating thickness, coating temperature, coating time and concentration of manganese were studied in the bath on the properties such as coating morphology, corrosion resistance, coating thickness. Coating morphology was characterized by scanning electron microscopy and corrosion resistance by polarization test. The pH values of 1.4, 1.8, 2 and 2.2 were selected, and the results... 

Airport saturation is one of the important issues which have always been of the specialists’ concern. One of the major applications of this subject is at the airport approach problems. While using current conventional approach procedures have many disadvantages regarding high fuel consumption and subsequent much environmental and noise pollution, the CDA concept which is one of the modern topics introduced in consequence of free flight theory, has less such disadvantages compared to conventional approach. Subject of this study is to investigate whether Procedural approach or CDA saturates an aiport sooner if the traffic flow increases. In this dissertation, using BADA database, CDA... 

Study of the structural flexibility of large-scale wind turbine components on aeroelastic performance is important under the existence of critical atmospheric conditions. Prediction and control the critical deformations, identifying maximum local deformation and modeling the forces involved, are required. Aeroelasticity analysis is a suitable method for studying the coupling effects of wind turbine aerodynamics, dynamics and structures. This research has been done by modeling wind turbine components including blades, hub, nacelle and tower, taking into account aerodynamic couplings, dynamics and structures. Considering the large scale of reference wind turbine, nonlinear equations have added... 

Resin In Pulp(RIP) is One of the most important processes for separation of uranium from ore while concentration of uranium in ore is low , based on adsorption of uranium that exist in the slurry on onion exchanger resins .uranium ore is dissolved in sulfuric acid and slurry that contain uranium is produced,then this slurry enter stirred reactors and adsorption process is performed.RIP are accepted universally and now adays countries such as canada,south africa and australia use this process when concentration of uranium in slurry after leaching process is 100-500 ppm.in iran also this process is performing in ardacan-saghand mine.Kinetic of adsorption process in stirred reactors has been... 

Natural boron includes two stable isotopes 10B and 11B with 19.3 and 80.7 weight percent respectivley.10B isotope has a high thermal neutron absorption cross section. So isotope 10B material is suitable for making atomic reactor control rods. Other and even more important applications of 10B are in disclosing neutrons in order to measure neutron reactors fluxes and also are in nuclear physics laboratories and medical radiation. This isotope also is used in the pharmaceutical and the military industries. There are several methods for separating boron isotopes. Among the distillation methods, thermal diffusion of BF3, distillation of BF3, distillation of methyl borate, boric acid distillation... 

Many concerns are directed toward heavy metal pollutions due to its environmental hazards, and many researchers have been working on elimination of heavy metals recently. The large volume of industrial wastewater and the probability of potable water resources pollutions, clarifies the importance of heavy metals removal from wastewater. Removing Uranium among all other heavy metals is of a great importance because of its radioactive and chemical toxication. This thesis topic is “Synthesis and Functionalization of Grapheme for Uranium Adsorption”. In order that, Graphene Oxide is fabricated from Graphite utilizing Hummers and Offman’s method firstly, and it is functionalized by two ligands...