Sharif Digital Repository

Adsorption equilibrium data for CO, CO2, CH4 and C2H4 on 5A molecular sieve were obtained at (303, 373 and 573) K and at partial pressures up to 1000 kPa. An accurate and simple volumetric apparatus was used to measure gas sorption. The Langmuir and Sips equations were used to correlate the experimental data. In spite of the relative simplicity of both isotherms, the correlation between experimental and theoretical data is good. The Sips equation with three parameters has expected a better fit than the Langmuir isotherm with two parameters. Based upon the Langmuir equation the enthalpy of adsorption and pre-exponential factor in the van't Hoff correlation were derived for all four gases. ©... 

One of the most attractive features of Simulated Moving Beds (SMBs) is their ability to perform reaction and separation simultaneously in order to increase reaction yields. In this paper, an appropriate configuration for the operation of such systems in gas phase has been presented and to improve the separation efficiency, Pressure Swing Adsorption (PSA) is also employed. Fischer-Tropsch Synthesis (FTS) has been chosen to verify this idea. After preparing the catalyst, choosing appropriate adsorbent and constructing the necessary experimental set up, experiments have been performed to achieve maximum yield of desired products (i.e., ethylene and ethane). Effective variables, such as flow... 

This study provides a stochastic dynamic programming model with a Markov chain that explicitly focuses on the customer as well as a new model for valuing the customers in the banking industry. The proposed framework calculates individual customer’s lifetime value dynamically. The study follows a stochastic dynamic programming model that is based on the Markov chain. The deduced findings are illustrated with supplementary context from an outstanding case study. The findings underline the importance of the stochastic model for calculating customer lifetime value based on customer behavior. The presented framework provides a beneficial way for future research and valuable insight for allocating... 

Twitter as one of the most important microblogging online social networks has attracted more than 200 million users in recent years. Although there have been several attempts on characterizing the Twitter by using incomplete sampled data, they have not been very successful to estimate the characteristics of the whole network. In this paper, we characterize Twitter by sampling from its social graph and user behaviors through a random walk based sampling technique called Respondent-Driven Sampling (RDS). To the best of our knowledge, for the first time RDS method and its estimator are used in order to obtain uniform unbiased estimation of several key structural and behavioral properties of... 

This article deals with product Family: a group of products with similar modules produced based on assembling to order (ATO) approach to cover diverse customer needs. The demand level and the customer requirements of these products are dynamically changing, which necessitate a novel model for co-reconfiguration of the product family (PF) and the supply chain (SC). Therefore, this article aims to apply Leader–follower Stackelberg Game Theory in order to present a co-reconfiguration of PF and SC based on three objectives: maximizing the total profit, maximizing customer utility and minimizing the supply chain cost in a bi-level structure. Maximizing the total profit and maximizing customer... 

Green products are increasingly considered by companies, owing to the significant attention of government regulations, customers’ requests and competitors. Here, we deal with Green Product Families (GPFs) by selecting green components, modules and products which are produced based on the assembling to order (ATO) approach to cover diverse customer needs. Designing a GPFs is important but not sufficient for sustainable optimization. In fact, we need to simultaneously consider the supply chain of a GPF to control the pollution generated in the downstream supply chain. For a sustainable optimization approach, this joint configuration is usually structured based on economic, environmental and... 

In the present work, the hot corrosion behavior of two types of multilayer plasma sprayed TBC were investigated and compared with functionally graded and conventional TBCs. These kinds of multilayer coatings consisted of nano/μ alumina as a top coat on YSZ layer, a metallic bond coat and a functionally graded intermediate layer deposited between YSZ and bond coat layers. All the layers were sprayed on the Ni-base super alloy substrate. The hot corrosion resistance of the plasma sprayed coatings was examined at 1050 °C for 40 h, using a fused mixture of 45 wt% Na2SO4 + 55wt%V2O5. Before and after hot corrosion, the microstructure and phase analysis of the coating were studied using scanning... 

The aim of this study is to investigate the effect of phosphate solution with Ca2+ additives on weight, surface morphology and electrochemical behavior of phosphated Zn-Ni film. In order to characterize structure and morphology of surface, X-ray diffraction (XRD) and scanning electron microscopy (SEM) were applied, respectively. Results showed that the main composition in produced coatings was hopeite Zn3(PO4)2·4H2O, which has high corrosion resistance. On one hand, in the presence of Ca2+ cations in solution, the weight of phosphate coating decreased, but on the other hand surface uniformity and corrosion resistance of the coating increased  

The focus of this research is on the fabrication of aluminium-B4C and aluminium-ZrSiO4 composites by vortex method as a liquid phase process of metal matrix composites. SEM observations show that reinforcement particles are dispersed homogeneously throughout the aluminium matrix. Density, mechanical properties such as hardness and tensile strength of Al base MMCs containing different volume fractions (5, 10 and 15 %) of micro-reinforcements are examined separately and compared with those of monolithic aluminium. Results show that mechanical properties of samples are noticeably higher than those of the monolithic aluminium. The optimum amount of reinforcement in this... 

In the present study, the effects of Sr and Mg were investigated on mechanical and biological properties of 58S bioactive glass (BG). SiO2-P2O5-CaO BG with different contents of Sr and Mg were synthesized via the sol-gel method and immersed in simulated body fluid (SBF) for several days to explore their biocompatibility. Precise analyses of the BG using X-ray powder diffraction, scanning electron microscopy, and transmission electron microscopy showed that the Mg-doped BG containing 8 wt % MgO possessed better biocompatibility. It was also found that mechanical properties of the BG could be improved by increasing the amounts of MgO and SrO. Both 5Sr-BG and 8Mg-BG samples did not exhibit any... 

Secure routing is a major key to service maintenance in ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. As a result of the resource limitations in such networks nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a novel data redirection method to mitigate the impact of node misbehavior on network...