Sharif Digital Repository

In recent years, polysilicon nanoparticles are used to enhance the oil recovery through the water injection process in oilfields. The contributing mechanisms are the reduction of interfacial tension and wettability alteration which lead to improving or decreasing the oil phase relative permeability and can be traced by change of relative permeability curves. However, profound understanding of the effect of dispersed nano-silica particles on the hysteretic behavior of relative permeability curves remains a controversy topic in the literature.The current study illustrates the influence of dispersed silica particles on hysteretic trend of two-phase curves of oil-water relative permeability.... 

Reliable relative permeability curves of oil-gas systems are important for successful simulation and modeling of gas injection, especially when the miscibility condition approaches. In this work, the relative permeability of a CO2-light oil system has been measured under different conditions, using the Civan and Donaldson (1989) [13] method. Dolomite and sandstone core samples were used in the experiments. The minimum miscibility pressure was calculated using an empirical correlation, as well as slim-tube simulation. Due to some controversial assumptions of the Civan and Donaldson method, such as immiscible and incompressible displacement, history matching was used for predicting the... 

The requirement of reliable relative permeability data is more intensified when the miscibility condition approaches. In this work the relative permeability of CO2 and oil has been measured at different miscibility conditions using conventional methods. Fractured dolomite and sandstone core plugs samples were used in the experiments. Due to some errorful assumptions of conventional methods such as immiscible, incompressible displacement, inverse modeling was used for predicting the reliable relative permeability of oil and gas phases at near miscible condition from measured oil production and pressure drop data. The initial guesses of relative permeabilities were provided from conventional... 

This paper concerns on experimental investigation of biopolymer/polymer flooding in fractured five-spot systems. In this study, a series of polymer injection processes were performed on five-spot glass type micromodels saturated with heavy crude oil. Seven fractured glass type micromodels were used to illustrate the effects of polymer type/concentration on oil recovery efficiency in presence of fractures with different geometrical properties (i.e., fractures orientation, length and number of fractures). Four synthetic polymers as well as a biopolymer at different levels of concentration were tested. Also a micromodel constituted from dead-end pores with various geometrical properties was... 

Injectivity decline due to mineral scale deposition in near wellbore region of water injection wells is one of the main challenging issues and have been widely reported in the literature. One of the main mechanisms of injectivity loss is incompatibility between injected and formation waters that may result in inorganic scale precipitation and subsequent deposition in porous media. Reliable reactive flow models to predict type and amount of scale along with permeability decline estimation allow planning and risk management of water flood projects. In this paper, we present a coupled geochemical and hydrodynamic model to simulate the scale precipitation and deposition of mineral scales in... 

It has been shown that one kind of poly silicon particles with sizes ranging from 10-500 nm, can be used in oilfields to enhance the oil recovery of water injection by 15-20%. The contributing mechanism might be reducing the interfacial tension which appears through improving relative permeability of the oil-phase. However, fundamental understanding of how hysteretic behavior of relative permeability curves affected by nanosilica particles remains a topic of debate in the literature. In this study, water as well as water dispersed nanosilica particles floods was performed on sandstone rock sample saturated by light crude oil supplied from one of Iranian oil reservoir, and the relative... 

It has been shown that one kind of poly silicon particles with sizes ranging from 10-500 nm, can be used in oilfields to enhance the oil recovery of water injection by 15-20%. The contributing mechanism might be reducing the interfacial tension which appears through improving relative permeability of the oil-phase. However, fundamental understanding of how hysteretic behavior of relative permeability curves affected by nanosilica particles remains a topic of debate in the literature. In this study, water as well as water dispersed nanosilica particles floods was performed on sandstone rock sample saturated by light crude oil supplied from one of Iranian oil reservoir, and the relative... 

hydraulic fracturing is one of the most prestigious mechanical methods which used as a facile production rate improvement method. Application of this method is in wells with low productivity index. Hydraulic fracturing efficiency depends on various factors, like fracture geometry, fluid composition and stress distribution. But some of them would be ignored. Such as fracture geometry which is neglected due to non-gravity and lack of investigation of DFN statistical population assumption. In this paper we develop a more comprehensive methodology based on fracture geometry, we aim to model one of the gas reservoirs which is naturally fractured, by using well-known commercial software. Based on... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the... 

Phenols and alcohols are silylated with hexamethyldisilazane (HMDS) under microwave irradiation in solvent-free condition in good to excellent yields