Sharif Digital Repository

This article applies a systematic approach based on the normalized determinant function (NDF) theory to analyse stability in multi-loop circuits and to design the required stabilization network. Presenting several provisions, the return ratios are extracted by employing immittance or hybrid matrices (Z, Y, G or H) of active two ports. Using these matrices, instead of the S-parameters, facilitates the selection of an appropriate stabilizer network. As a practical case, a non-uniform distributed amplifier (NDA) is designed and inspected for potential instabilities. The presented procedure detects instability associated with one of the NDA circuit's loops, and an appropriate stabilization... 

Colloidal gas aphron (CGA) based fluids have recently been introduced to develop depleted hydrocarbon reservoirs due to their ability in controlling fluid losses. Bubbles size of CGAs plays an important role in pore blockage ability as the controlling mechanism in fluid invasion reduction. However, fundamental understanding of how bubble size distribution is controlled by polymer and surfactant concentrations is not well discussed in the available literature. Almost all reported experiences on CGAs sizing were conducted on single bubble behavior, and little attention has been given to the variation of bubble size distribution (BSD) of CGAs at different levels of polymer/surfactant... 

Recently, Colloidal Gas Aphron (CGA) based fluids have been introduced to further develop depleted hydrocarbon reservoirs. This fluid system has been employed in an attempt to control drilling fluid invasion and, thus, reducing formation damage occurred during drilling operations. Understanding the mechanisms of fluid invasion control is of great importance for successful design and application of CGA-based fluids in drilling operations. Although fluid flow of conventional foams has been studied extensively in the available literature, little attention has been paid to CGA fluids flow, especially in heterogeneous fractured porous media. Here, an experimental study was conducted to achieve... 

Recently, colloidal gas aphron (CGA) fluids technology has been employed to drill depleted oil and gas reservoirs. Almost all reported experience on CGA fluids were conducted at ambient conditions, and little attention has been paid on the behavior of CGAs at high pressures which is more close to real conditions. In this study, high pressure experiments were conducted by using High Pressure Microscope cell to visualize/monitor the behavior of CGAs at elevated pressures. Single bubble behavior and bubble size distribution (BSD) of CGAs were investigated under different scenarios of pressure change. Results of experiments revealed that BSD of CGAs is controlled by the path of pressure changes,... 

Application of light-weight drilling fluids is essential to develop depleted hydrocarbon reservoirs. Recently, colloidal gas aphron (CGA)-based fluids have been introduced for such applications due to their ability in controlling fluid losses. In this work, a comprehensive experimental study was performed to choose the best formulation for CGA fluids by implementing static stability tests, rheological behavior measurements, and bubble size analyses of CGAs. Xanthan gum polymer and sodium dodecyl benzene sulfonate (SDBS), an anionic surfactant, and cetyl trimethyl ammonium bromide (CTAB), a cationic surfactant, were utilized to prepare CGAs. For the range of experiments conducted, the... 

The emergence of fog computing has significantly enhanced real-time data processing by bringing computation resources closer to data sources. This adoption is very beneficial in the healthcare sector, where abundant time-sensitive processing tasks exist. Although such adoption is very promising, there is a challenge with the limited computational capacity of fog nodes. This challenge becomes even more critical when mobile IoT nodes enter the network, potentially increasing the network load. To address this challenge, this paper presents a framework that leverages a Many-to-One offloading (M2One) policy designed for modelling the dynamic nature and time-critical aspect of processing tasks in... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the... 

Phenols and alcohols are silylated with hexamethyldisilazane (HMDS) under microwave irradiation in solvent-free condition in good to excellent yields