Loading...
Search for:
pelaseyed--s--s
0.102 seconds
Total 10999 records
Investigation of the Shaft Failure Connected to Extruder
, Article Journal of Failure Analysis and Prevention ; Volume 15, Issue 6 , 2015 , Pages 775-781 ; 15477029 (ISSN) ; Mashayekhi, F ; Movahedi-Rad, A ; Sharif University of Technology
Springer New York LLC
2015
Abstract
In this study, the failure analysis of a shaft of a unit, which had been failed during the service, was studied. This shaft was welded to the blades, and their chemical compositions were determined by spectroscopy method. In order to determine the root cause of failure and contribution factors, different investigation methods including visual examination, optical microscopy and scanning electron microscope analysis, and hardness test were carried out. It was concluded that the shaft was failed due to fatigue. The failure was caused by improper welding of blades to the shaft. At the end, in order to prevent or decelerate such failure, some recommended remedies were suggested
Failure analysis of gas turbine burner tips
, Article Engineering Failure Analysis ; Volume 99 , 2019 , Pages 7-17 ; 13506307 (ISSN) ; Attarian, M ; Kermajani, M ; Abdi, A ; Sharif University of Technology
Elsevier Ltd
2019
Abstract
In this study, the causes of failure in gas turbine burner tips were investigated. For this purpose, two burner tips used in a petrochemical company with different failure evidence as well as service times were inspected. These parts showed signs of deterioration such as multiple cracks, corrosion, and wear following 4000 h and 8000 h operations. The examinations included chemical composition analysis using optical emission spectroscopy (OES), stereo-, optical-, and scanning electron microscopy studies, and macro/micro-hardness measurements. These investigations revealed high thermal stresses to be the main failure cause of the burner tips. Moreover, due to flame inclination, a local...
A novel pathway to produce biodegradable and bioactive PLGA/TiO2 nanocomposite scaffolds for tissue engineering: Air–liquid foaming
, Article Journal of Biomedical Materials Research - Part A ; Volume 108, Issue 6 , 2020 , Pages 1390-1407 ; Madaah Hosseini, H. R ; Samadikuchaksaraei, A ; Sharif University of Technology
John Wiley and Sons Inc
2020
Abstract
Poly (lactate-co-glycolate) (PLGA) is a typical biocompatible and biodegradable synthetic polymer. The addition of TiO2 nanoparticles has shown to improve compressive modulus of PLGA scaffolds and reduced fast degradation. A novel method has been applied to fabricate PLGA/TiO2 scaffolds without using any inorganic solvent, with aim of improving the biocompatibility, macroscale morphology, and well inter-connected pores efficacy: Air–Liquid Foaming. Field Emission Scanning Electron Microscopy (FESEM) revealed an increase in interconnected porosity of up to 98%. As well the compressive testing showed enhancement in modulus. Bioactivity and in vitro degradation were studied with immersion of...
PLGA/TiO2 nanocomposite scaffolds for biomedical applications: Fabrication, photocatalytic, and antibacterial properties
, Article BioImpacts ; Volume 11, Issue 1 , 2021 , Pages 45-52 ; 22285652 (ISSN) ; Madaah Hosseini, H. R ; Nokhbedehghan, Z ; Samadikuchaksaraei, A ; Sharif University of Technology
Tabriz University of Medical Sciences
2021
Abstract
Introduction: Porous 3D scaffolds synthesized using biocompatible and biodegradable materials could provide suitable microenvironment and mechanical support for optimal cell growth and function. The effect of the scaffold porosity on the mechanical properties, as well as the TiO2 nanoparticles addition on the bioactivity, antimicrobial, photocatalytic, and cytotoxicity properties of scaffolds were investigated. Methods: In the present study, porous scaffolds consisting poly (lactide-co-glycolide) (PLGA) containing TiO2 nanoparticles were fabricated via air-liquid foaming technique, which is a novel method and has more advantages due to not using additives for nucleation compared to former...
Fabrication of Al /Al3Ti in-situ Composite by Mechanical Alloying and Two-Step Hot Press
, M.Sc. Thesis Sharif University of Technology ; Maddah Hosseini, Hamid Reza (Supervisor)
Abstract
Al /Al3Ti in-situ composite have been fabricated by mechanical alloying and two-step hot pressing of powders containing Al and 20%wt Ti. Samples were characterized by using optical microscopy, density measurement, brinel hardness, XRD analysis. An increasing density was observed with increasing pressure until certain pressure and after that the density of composite decreased, which can be attributed to the increase in the level of porosity level and the amount of forming Al3Ti. The samples that hot pressed under cycle 5 and 6, showed the most volume fraction of in-situ phases on the matrix. The wear behavior of Al based composites reinforced with in situ Al3Ti particles has been investigated...
Fabrication and Characterization of Bioactive PLGA- TiO2 Nanocomposite Scaffold by Air-liquid Foaming for Bone Tissue Engineering
, Ph.D. Dissertation Sharif University of Technology ; Madaah Hosseini, Hamid Reza (Supervisor) ; Samadi Kuchaksaraei, Ali (Co-Supervisor)
Abstract
Poly (lactate-co-glycolate) is a typical biocompatible and biodegradable synthetic polymer. Addition of TiO2 nanoparticles improved compressive modulus of PLGA scaffolds and reduced fast degradation. Porous 3D scaffolds, which are synthesized using biocompatible and biodegradable materials, could provide suitable microenvironment and mechanical support for optimal cell growth and function. A novel method has been applied to fabricate PLGA/TiO2 scaffolds without using any organic solvent or porogen for nucleation compared to former ways, with aim of improving the biocompatibility, macroscale morphology and well inter-connected pores efficacy: Air-Liquid Foaming. Adjustment of the foaming...
The relationship between an EFL teacher's gender and students' willingness to communicate
, Article International Journal of Communication and Linguistic Studies ; Volume 10, Issue 4 , 2013 , Pages 17-29 ; 23277882 (ISSN) ; Pakzadian, S. S
Common Ground Publishing
2013
Abstract
Learning a foreign language encompasses a process of trial and error that can lead to the progression of the learner's interlanguage, meaning that the learners make use of their language knowledge that receives feedback and brings about progress through diagnosis of the problems and being corrected by the teacher. Therefore, there exists a need to analyze the underlying reasons causing the students to remain taciturn with a low willingness to communicate (WTC) during a language class. There has been much work done investigating the role of the learner's stable personal characteristics (traits) along with their situational changes at a specific time (states) that influence the student's...
An automated simple algorithm for realistic pore network extraction from micro-tomography images
, Article Journal of Petroleum Science and Engineering ; Vol. 123, issue , 2014 , pp. 164-171 ; ISSN: 09204105 ; Jamshidi, S ; Salehi, S
2014
Abstract
Using 3-D scanned data to analyze and extract pore network plays a vital role in investigation of porous media's characteristics. In this paper, a new simple method is developed to detect pores and throats for analyzing the connectivity and permeability of the network. This automated method utilizes some of the common and well-known image processing functions which are widely accessible by researchers and this has led to an easy algorithm implementation. In this method, after polishing and quality control of images, using city-block distance function and watershed segmentation algorithm, pores and throats are detected and 3-D network is produced. This method can also be applied on 2-D images...
Discrimination of heart arrhythmias using novel features in heart rate phase space
, Article Computing in Cardiology ; Volume 40 , Sept , 2013 , Pages 1035-1038 ; 23258861 (ISSN); 9781479908844 (ISBN) ; Rezaei, S ; Salavatian, S
2013
Abstract
In this paper, we try to recognize and distinguish different groups of arrhythmia using novel features which have been obtained from the heart rate's phase space in recent years. For this purpose, we used Triangular Phase Space Mapping (TPSM) and Parabolic Phase Space Mapping (PPSM). For recognition, we used three groups of 15 subjects using the Physionet database (Arrhythmia, Congestive Heart Failure (CHF), and Atrial Fibrillation (AF)) with Normal Sinus Rhythm (NSR). The obtained features discriminate arrhythmia from NSR by p
An intelligent hybrid classification algorithm integrating fuzzy rule-based extraction and harmony search optimization: Medical diagnosis applications
, Article Knowledge-Based Systems ; Volume 220 , 2021 ; 09507051 (ISSN) ; Abdullah, S ; Akhavan Niaki, S. T ; Banihashemi, S ; Sharif University of Technology
Elsevier B.V
2021
Abstract
Uncertainty is a critical factor in medical datasets needed to be overcome for increasing diagnosis efficiency. This paper proposes an intelligent classification algorithm comprising a fuzzy rule-based approach, a harmony search (HS) algorithm, and a heuristic algorithm to classify medical datasets intelligently. Two fuzzy approaches, as well as orthogonal and triangular fuzzy sets, are first utilized to define the attributes of data. Then, an HS algorithm is integrated with a heuristic to generate fuzzy rules to select the best rules in the fuzzy rule-based systems. Moreover, to improve the performance of the proposed classification approach, a three-phase parameter tuning approach is...
Performance evaluation of shared hosting security methods
, Article Proc. of the 11th IEEE Int. Conference on Trust, Security and Privacy in Computing and Communications, TrustCom-2012 - 11th IEEE Int. Conference on Ubiquitous Computing and Communications ; 2012 , Pages 1310-1315 ; 9780769547459 (ISBN) ; Arshad, S ; Khoshkdahan, S ; Sharif University of Technology
2012
Abstract
Shared hosting is a kind of web hosting in which multiple websites reside on one webserver. It is cost-effective and makes the administration easier for websites' owners. However, shared hosting has some performance and security issues. In default shared hosting configuration, all websites' scripts are executed under the webserver's user account regardless of their owners. Therefore, a website is able to access other websites' resources. This security problem arises from lack of proper isolation between different websites hosted on the same webserver. In this survey, we have examined different methods for handling mentioned security issue. Also we evaluated the performance of mentioned...
The behaviour of an artificially cemented sandy gravel
, Article Geotechnical and Geological Engineering ; Volume 23, Issue 5 , 2005 , Pages 537-560 ; 09603182 (ISSN) ; Hosseini, S. M ; Toll, D. G ; Yasrebi, S. S ; Sharif University of Technology
2005
Abstract
The major section of the city of Tehran, Iran has been developed on cemented coarse-grained alluvium. This deposit consists of gravely sand to sandy gravel with some cobbles and is dominantly cemented by carbonaceous materials. In order to understand the mechanical behaviour of this soil, a series of undrained triaxial compression tests and unconfined compression tests were performed on uncemented and artificially cemented samples. Portland cement type I was used as the cementation agent for preparing artificially cemented samples. Uncemented samples and lightly cemented samples (1.5% cement) tested at high confining pressure showed contractive behaviour accompanied with positive excess pore...
An imperialist competitive algorithm approach for multi-objective optimization of direct coupling photovoltaic-electrolyzer systems
, Article International Journal of Hydrogen Energy ; Vol. 39, Issue 33 , 11 November , 2014 , pp. 18743-18757 ; ISSN: 03603199 ; Sayedin, F ; Khavas, S. S
2014
Abstract
In the context of sustainable clean hydrogen production pathways, photovoltaic-electrolyzer systems are one of the most promising alternatives for acquiring hydrogen from renewable energy sources. In fact, determining the optimal set of design and operating variables are always a key issue while coupling directly renewable electricity sources to PEM electrolyzers. Few previous studies have attempted to find the optimal size and operational condition of directly coupled photovoltaic-electrolyzer (PV/El) systems in order to maximize the hydrogen production or to minimize energy transfer loss between photovoltaic devices and the electrolyzer. Nevertheless an easy and efficient approach still...
Kalman filter based packet loss replacement in presence of additive noise
, Article 2012 25th IEEE Canadian Conference on Electrical and Computer Engineering: Vision for a Greener Future, CCECE 2012 ; 2012 ; 9781467314336 (ISBN) ; Ghorshi, S ; Tahaei, A
2012
Abstract
A major problem in real-time packet-based communication systems, is misrouted or delayed packets which results in degraded perceived voice quality. If packets are not available on time, the packets are considered as lost. The easiest solution in a network terminal receiver is to replace silence for the duration of lost speech segments. In a high quality communication system, to avoid degradation in speech quality due to packet loss, a suitable method or algorithm is needed to replace the missing segments of speech. In this paper, we introduce an adaptive filter for replacement of lost speech segment. In this method Kalman filter as a state-space based method will be used to predict the...
Investigation of Mesh Sensitivity Influence to Determine Crack Characteristic by Finite Element Methods
, Article Journal of Failure Analysis and Prevention ; Volume 16, Issue 3 , 2016 , Pages 506-512 ; 15477029 (ISSN) ; Mirjavadi, S. S ; Asli, S. A ; Sharif University of Technology
Springer New York LLC
2016
Abstract
In this research, an extended finite element model has been investigated. Investigation of opening and closure stress always has been one of the difficult parameters to analysis of results; therefore, the utilization of finite element methods would be a good and logical alternative for this purpose. In addition, linear elastic fracture criteria are used for validation of numerical results from the simulation. In this work, a detailed analysis of the influence of different parameters in the results of a specific specimen with a semi-elliptical tooling groove in terms of closure and opening stress is presented, and the impact of optimum element size in fracture characteristic in various load...
Investigation of the effect of nanosilica on rheological, thermal, mechanical, structural, and piezoelectric properties of poly(vinylidene fluoride) nanofibers fabricated using an electrospinning technique
, Article Industrial and Engineering Chemistry Research ; Volume 56, Issue 44 , 2017 , Pages 12596-12607 ; 08885885 (ISSN) ; Ahmad Ramazani, S. A ; Talebi, S ; Fattahpour, S ; Hasany, M ; Sharif University of Technology
2017
Abstract
The effects of different nano-SiO2 contents on the rheological properties of poly(vinylidene fluoride) (PVDF) solution and mechanical, thermal, structural, and piezoelectric properties of composite nanofibers were investigated. Results showed an increase in fiber diameter (∼125 to 350 nm) and ∼450% increase in tensile strength as the content of nano-SiO2 particles increased. The degree of crystallinity decreased by 19% as the nano-SiO2 content increased by 2% (w/w). Further investigation demonstrated that silica could significantly improve the piezoelectric properties of PVDF nanofibers as the output voltage showed an increase in the presence of silica attributed to change in the crystalline...
A method for real-time safe navigation in noisy environments
, Article 2013 18th International Conference on Methods and Models in Automation and Robotics, MMAR 2013, Miedzyzdroje ; 2013 , Pages 329-333 ; 9781467355063 (ISBN) ; Kamali, E ; Niknezhad, M. R ; Monfared, S. S. M. S ; Sharif University of Technology
2013
Abstract
The challenge of finding an optimized and reliable path dates back to emersion of mobile robots. Several approaches have been developed that have partially answered this need. Satisfying results in previous implementations has led to an increased utilization of sampling-based motion planning algorithms in recent years, especially in high degrees of freedom (DOF), fast evolving environments. Another advantage of these algorithms is their probabilistic completeness that guarantees delivery of a path in sufficient time, if one exists. On the other hand, sampling based motion planners leave no comment on safety of the planned path. This paper suggests biasing the Rapidly-exploring Random Trees...
A generalization of the swartz equality
, Article Glasgow Mathematical Journal ; Vol. 56, issue. 2 , May , 2014 , pp. 381-386 ; ISSN: 00170895 ; Fakhari, S. A. S ; Yassemi, S ; Sharif University of Technology
2014
Abstract
For a given (d-1)-dimensional simplicial complex Γ, we denote its h-vector by h(Γ)=(h 0(Γ),h 1(Γ),...,hd (Γ)) and set h -1(Γ)=0. The known Swartz equality implies that if Δ is a (d-1)-dimensional Buchsbaum simplicial complex over a field, then for every 0 ≤ i ≤ d, the inequality ihi (Δ)+(d-i+1)h i-1(Δ) ≥ 0 holds true. In this paper, by using these inequalities, we give a simple proof for a result of Terai (N. Terai, On h-vectors of Buchsbaum Stanley-Reisner rings, Hokkaido Math. J. 25(1) (1996), 137-148) on the h-vectors of Buchsbaum simplicial complexes. We then generalize the Swartz equality (E. Swartz, Lower bounds for h-vectors of k-CM, independence, and broken circuit complexes, SIAM J....
Hardware-in-the-loop optimization of an active vibration controller in a flexible beam structure using evolutionary algorithms
, Article Journal of Intelligent Material Systems and Structures ; Vol. 25, issue. 10 , 2014 , p. 1211-1223 ; Hosseini Kordkheili, S. A ; Afshari, S. S ; Sharif University of Technology
2014
Abstract
In this study, active vibration control of a cantilevered flexible beam structure equipped with bonded piezoelectric sensor/actuators is investigated. The linear quadratic regulator technique together with an observer is adopted to design the controller as well as to provide the full-state feedback. Two different approaches are subsequently used for simultaneously integrated optimization of the controller and observer parameters. In the first approach, a linear experimental model of the system is obtained using identification techniques, and the optimization is then performed based on a computer simulation of the system. However, in the second approach, a hardware-in-the-loop optimization...
An efficient inference in meanfield approximation by adaptive manifold filtering: (Machine learning & data mining)
, Article Proceedings of the 4th International Conference on Computer and Knowledge Engineering, ICCKE 2014 ; 2014 , p. 581-585 ; Ramezanpur, S ; Kasaei, S ; Sanaei, E ; Sharif University of Technology
2014
Abstract
A new method for speeding up the approximate maximum posterior marginal (MPM) inference in meanfield approximation of a fully connected graph is introduced. Weight of graph edges is measured by mixture of Gaussian kernels. This fully connected graph is used for segmentation of image data. The bottleneck of the inference in meanfield approximation is where the similar bilateral filtering is needed for updating the marginal in the message passing step. To speed up the inference, the adaptive manifold high dimensional Gaussian filter is used. As its time complexity is 0(ND), it leads to accelerating the marginal update in the message passing step. Its time complexity is linear and relative to...