Sharif Digital Repository

Nowadays, increasingly improvements in the digital technology and the advantages of using digital signal processing methods lead engineers to use digital signal processing instead of analog processing in variant domains. However, speed limitations in analog to digital converters (ADCs) and data transfer ports prevent its penetration to high frequency signals region. In this thesis, an Instantaneous Frequency Measurement (IFM) system that can measure frequency in the range of 2-18 GHz is implemented fully digital (DIFM) on FPGA. To do so, monobit sampling technique with the sampling rate of 10 GHz is selected, and GTX high speed serial port is configured to transfer digital data into FPGA.... 

Automatic modulation recognition is an improving area in signal processing that has been interest of research institutes in recent years. Every signal intelligence system consists of three parts: Front, middle prcessing, Output. which Automatic recognition system is in the middle processing. Vast researches has been done on front and output section. By the way output section demands proper work by modulation recognition section in order to work appropriately. With the right knowledge of the receiving modulation, output section can jam or demodulate the receiving signal by demand. Intrapulse modulation in this research is the meaningful variation of frequency, amplitude or phase of a signal.... 

It is generally accepted that Electronic Warfare has three distinct components: (1) electronic support (ES), (2) electronic attack (EA), and (3) electronic protect (EP). ES is included those measures taken to collect information about an adversary by intercepting radiated emissions. EA refers to attempting to deny adversaries access to their information by radiating energy into their receivers. EP includes activities under taken to prevent an adversary from successfully conducting ES or EA on friendly forces.
The function of Electronic Support Measurement (ESM) System is considered as a part of the first component (i.e. ES). After receiving emitted signals from various radars by ESM... 

The target of reconnaissance receivers is to detect radio frequencies and pulses present in the environment and extracting their characteristics. To receive the signals in the range of 2 to 18 GHz, different receptors can be used. Each receptor has its specific aplications, advantages and disadvantages. In this project, we proposed a receptor scheme with the following features: 1-simple hardware, 2-ability to detect simultaneous signals, 3-hundred percent probability of intercept (POI), 4-high input bandwidth and 5-rapid threat detection. To have such a receptor, we should move data processing parts of receptor to digital domain as much as possible, and reduce the amount of analog... 

Analog-to-digital conversion and signal processing has been increasing due to its many advantages. So that mostly we prefer to convert signal from analog area to digital samples, then they are processed and finaly put the result signal at the system output. How ever because the restriction of the sampling rate, Prevent the spread of digital processing for the high-frequency signal (RF). In recent years, ADCs sampling rate rise up to several GHz (for example ADC with 4 GSPS and 12 bits for TI) that output of the these ADCs by powerful and fast FPGAs are processed but According to Shannon theorem band width of these ADCs is not desirable.the goal of this thesis uses of the compressed sensing... 

One of the important jobs of ESM and Elint receiver is to find the direction of arrival of the targets. Also DOA estimation has applications in guiding missiles and jammers location, position finding using of multiple DF systems which are placed in different locations is the most important use of this type of system.
A DF system has multiple parts: receiver, algorithm and arrays of antennas.
Amplitude comparison algorithms are more simple but on the other hand phase comparison algorithms prepare more accurate estimation. In this thesis these algorithms are simulated and to each other. And it will be concluded that, in the application being test, the "MUSIC" algorithm is the best.... 

In this thesis, the problem of locating a source based on the time difference of arrival (TDOA) has been studied and three different methods have been presented to improve the precision of the positioning. The first method is a solution to the least square error (LSE) by utilizing a convex problem. Generally, the mentioned problem is a non-convex problem; however, it is possible to convert it to a convex one by some relaxation in the constraints. By some justifiable and insightful relaxation, not only we obtain a convex problem, but also the exact solution of the main problem is derived. The second method is using high perturbed TDOA measurements which severely affected the localization.... 

Modulation Recognition of communication signals has been an important theme in the field of wireless communication. Modulation Recognition has various applications for both military and civil purposes. Recently there has been considerable attention to Digital Modulation Recognition, due to the vast application of this kind of Modulation Recognition tasks. In this thesis, we proposed a Digital Modulation Recognition Algorithm, which is able to identify various types of digital modulations in low SNRs. These include BASK, BFSK, BPSK, 4-ASK, 4-FSK, 4-PSK, 8-FSK, 8-PSK, MQAM (M=16, 32, 64). The proposed method uses a general pattern recognition scheme, consisting of a feature extraction phase... 

There are many methods for direction finding (DF) of radar targets, while the complexity and time elapsed calculation are their main drawbacks, thus the real time implementation of this methods are difficult. Artificial neural network (ANN) for DF is one of the optimum and good ways to implementation that have better result versus other techniques. In this thesis, direction finding problem for radar targets by using artificial neural networks have been studied. A new method is presented to detect the multiple targets simultaneously, that it can be implemented in digital form easily. Here one-dimensional DF by using uniform linear array (ULA) discussed and formulated, then the proposed... 

Human facial activity recognition is one of the endeavors to improve human-computer interaction. Recognition of excitements and emotions on human face by machine and makinga corresponding reaction is essential for man machine intraction.The purpose of this project is recognizingactivities such as speaking, eating, laughing, agree and disagree which have more complexity than usualemotions such as fear and happinesscontained in common datasets.So, adataset in accordance with the above mentioned 5 activities was collected and the appropriate feature vector for analyzing these face activities were implemented.Distance between the interest points located on the face were used as parameters in... 

Magnetic resonance imaging is one of non-invasive methods to measure the hemodynamic and morphologic parameters of tissues, especially brain tissues. Hemodynamic parameters monitoring in brain tissue is of significant importance in many majors such as detection of tumor occurrence, brain abnormalities, and track of treatment procedures. Blood is a suspension, comprised of plasma, red blood cells, white blood cells, platelet, etc. Plasma is a Newtonian fluid which is composed of proteins and has a constant viscosity in body temperature. Rheological properties of blood are highly dependent on mechanical and rheological properties of its cells and this dependence is multiplied in narrow vessels... 

The purpose of this project is to detect the instantaneous frequency of an unknown signal which has a frequency range from 2GHz to 18GHz, and its amplitude is limited. In the first step, this signal is amplified, and its amplitude is limited and then it is converted to a digital sequence using a mono-bit scheme and entered the FPGA through an ultra-fast serial port. After that, the algorithm of this project is supposed to do two main processing stages on the received stream of pulses. Detection should be performed in the first phase. It means that it should be determined whether the received pulse sequence is a random sequence made by noise or an almost regular sequence due to a sinusoidal... 

Nowadays, retrieval is an inseparable part of user activities and due to growing usage of Content-Based Image Retrieval (CBIR), it has become a hot and challenging research topic specially in the past decade. The most important challenge that retrieval systems (including CBIR systems) are facing is the semantic gap between abstractions in the user’s mind and what is searched. One of the ways of dealing with this challenge is getting more information from the user about what he needs and so decreasing the distance between user’s will and what he gives to search engine as the description of his need. In this research, the class of query image is supposed to be given. For using this...