Loading...
Search for: piri--saeed
0.119 seconds

    Numerical Investigation of Nano-Particles Dispersion and Deposition in Crossing of Elliptical Obstacles Networkusing Lattice Boltzmann Method

    , M.Sc. Thesis Sharif University of Technology Piri, Salman (Author) ; Moosavi, Ali (Supervisor)
    Abstract
    Investigation of transport and deposition of aerosol particles has been of interest to researchers in many branches of science. Various numerical and experimental methods has been utilized in particulate fluid flows studies. In recent relevant researches lattice Boltzmann method has been widely used and is reported to be a robust and efficient method. In present study, numerical investigation of dispersion and deposition of aerosol particles is studies in the channel, containing elliptical obstacles geometry using Lattice Boltzmann Method. Fluid flow simulations are performed using LBM while for the study of particle transport and deposition, tracking and the motion equations of them,... 

    Design and Implementation of 6-18 GHz Driver Amplifier

    , M.Sc. Thesis Sharif University of Technology Piri, Milad (Author) ; Medi, Ali (Supervisor)
    Abstract
    Nowadays, application of microwave integrated circuits in commerce and humanitarian military measures plays an important role. When integrated microwave circuits emerged, the dream of producing high quality and low cost amplifiers and mass productionhas been fulfilled. Power amplifiers which are the last block in a communication systemare one of the most important circuits in this field.
    Since driver amplifiers are interstage between high and low power sections of a system, should have good specificationsfor both small and large signal analysis. Thus, designing such a circuit can be very challenging. In order to get the desired bandwidth, high-order filters are used as interstage... 

    Studying the Role of Distraction of Men and Women in Accidents Using Structural Equation Modeling

    , M.Sc. Thesis Sharif University of Technology Piri, Mehran (Author) ; Kermanshah, Mohammad (Supervisor)
    Abstract
    Crash severity is among the fundamental safety indicators in transportation. In recent years, distracted driving has been one of the biggest concerns in road crashes. Many scholars have evaluated the effects of distraction in crash severities and injuries. This study uses the latest general estimates system (GES) crash dataset, which is a subset of the US National Automotive Sampling System (NASS) and the structural equation model (SEM) approach to explore the relationships between distraction factors and crash severity in male and female drivers. Using SEM for modeling about 22 thousand observations offers the opportunity to simultaneously examine complex relationships between variables by... 

    Integrated Dynamic Pricing and Ordering in a Supply Chain With Demand Learning

    , M.Sc. Thesis Sharif University of Technology Piri, Saeed (Author) ; Modarres Yazdi, Mohammad (Supervisor)
    Abstract
    In this study, four pricing models in a supply chain are developed. The first model includes a retailer. The second model also includes a retailer. However in this model we apply the learning technique to update the stochastic demand. In the third model, we consider a supply chain consisting of a retailer and a manufacturer. Finally, in the fourth model we consider a supply chain consisting of a retailer and a manufacturer and like the second model; we apply the learning technique to update the stochastic demand. In all models we assume that a single product is sold in a monopoly market. In this study we seek to simultaneously determine decisions about production, pricing and ordering to... 

    Novel Approach Towards Mechanical and Thermal Resistant Capillary Microextraction by Sol-Gel Technique in On-Line Combination with High Performance Liquid Chromatography

    , Ph.D. Dissertation Sharif University of Technology Piri-Moghadam, Hamed (Author) ; Bagheri, Habib (Supervisor)
    Abstract
    In this thesis, a new approach was developed to achieve mechanical and chemical resistant capillary microextraction (CME) in on-line combination with high performance liquid chromatography (HPLC) based on sol-gel technology. This thesis is divided into three chapters:
    First chapter contains of two parts. Overcoming the lack of mechanical stability of the substrate of CME by replacing the fused silica by copper tubings was the main objective of the first part. Self-assembled monolayers technique was employed to functionalize the copper tube followed by chemical bonding of the sorbent on the inner surface of the copper tube by sol-gel technology. The prepared copper tube containing the... 

    An approach for refining JML specification to object oriented code

    , Article 2009 14th International CSI Computer Conference, 20 October 2009 through 21 October 2009 ; 2009 , Pages 1-9 ; 9781424442621 (ISBN) Piri, R ; Mirian Hosseinabadi, S. H ; Sharif University of Technology
    2009
    Abstract
    JML is a behavioral interface specification language which has Java as its target implementation language. It combines the idea of using Java expressions from Eiffel language with the model-based approach to specify a program. Refinement calculus is a framework to produce executable code from a specification by preserving the correctness of programs. In this paper some constructs of JML concerning object creation, feature call, exceptional behavior and concurrency constructs are studied and some refinement rules are proposed to obtain an object oriented code in Java from a JML specification containig these constructs. The correctness of these rules is proved by weakest precondition predicate... 

    Simulation of the Influence of Hypertension on Low Density Lipoprotein (Ldl) Permeation into Multilayer Coronary Bifurcation

    , M.Sc. Thesis Sharif University of Technology Moniri Piri, Mohammad (Author) ; Firoozabadi, Bahar (Supervisor)
    Abstract
    Atherosclerosis, due to the penetration of low-density lipoprotein particles (LDL) into the arterial wall, is one of the most common and death-leading diseases in today's world. Due to its importance, extensive research has been conducted on the factors that affect this disease. In this thesis, a numerical study of the effects of Wall Shear Stress (WSS), non-Newtonian behavior of blood, different hematocrit values, and blood pressure on LDL permeation through the artery wall layers are investigated in a 4-layer wall model of a coronary bifurcation. To obtain the velocity and concentration fields in the domain, momentum, Brinkman, and mass transport equations are solved in the lumen and wall... 

    Refning Object Oriented Formal Specifcation To Object Oriented Code

    , M.Sc. Thesis Sharif University of Technology Piri, Razieh (Author) ; Mirian Hosseinabadi, Hassan (Supervisor)
    Abstract
    The presented work provides a calculus for refining an object oriented formal specification to an object oriented code. A refinement calculus provides a framework to produce executable code from a specification while preserving its correctness. Eiffel Refinement Calculus is the most complete work in this domain which is studied in this research.
    The Formal specification language which is considered for this purpose is .JML to specify executable code in .Java language. For this calculus some refinement laws are pre- sented and their proofs is given by weakest precondition predicate transformer, a work which was not considered in Eiffel Refinement Calculus. The constructs which are used in... 

    On-line micro solid-phase extraction of clodinafop propargyl from water, soil and wheat samples using electrospun polyamide nanofibers

    , Article Chromatographia ; Vol. 77, issue. 9-10 , May , 2014 , p. 723-728 Bagheri, H ; Asgari, S ; Piri-Moghadam, H ; Sharif University of Technology
    2014
    Abstract
    An on-line extraction/determination set up was designed for micro solid-phase extraction of clodinafop propargyl from water, soil and wheat samples using electrospun polyamide nanofiber mats. The prepared mats were packed in a stainless steel tube which conveniently acted as a high-performance liquid chromatography injection loop. Influential parameters affecting the extraction efficiency were optimized using a distilled water sample fortified with 25 μg L-1 of clodinafop propargyl. An enrichment factor of 440 was achieved for clodinafop propargyl indicating the ability of the whole procedure. Under the optimum conditions, the linearity for the analyte was in the range of 6-700 μg L-1, while... 

    Grafting the sol-gel based sorbents by diazonium salts: A novel approach toward unbreakable capillary microextraction

    , Article Journal of Chromatography A ; Volume 1318 , November , 2013 , Pages 58-64 ; 00219673 (ISSN) Bagheri, H ; Bayat, P ; Piri Moghadam, H ; Sharif University of Technology
    2013
    Abstract
    The present work deals with a novel approach for grafting a sol-gel based sorbent, using diazonium salts for preparation of an unbreakable capillary microextraction (CME) device in on-line combination with high performance liquid chromatography (HPLC). The use of diazonium salts modifier allowed all types of metallic and non-metallic substrates to be used without any limitation. Substrates including copper, brass, stainless steel and polytetrafluoroethylene (PTFE) were chosen to be functionalized by chemical or electrochemical reduction of 4-amino phenyl acetic acid. Then, 3-(trimethoxysilyl)propylamine (3TMSPA) was selected as the precursor and the only reagent for preparation of the... 

    Wavelet Applications in Pattern Recognition

    , M.Sc. Thesis Sharif University of Technology Piri Pishekloo, Bijan (Author) ; Mahdavi Amiri, Nezameddin (Supervisor)
    Abstract
    We study wavelet transformation for use in pattern recognition. Feature extraction is a crucial processing step for pattern recognition. Feature extraction is based on finding mathematical methods for reducing dimensionality of pattern representation. Two most important features to be extracted are edges and textures. Edges and textures are not absolute concepts and change with scale. Moreover, local characteristics of edges are needed. In recent decades, wavelet transformation as a mathematical tool has captured the attention of many scientists in signal processing and mathematics. Wavelet basis can provide efficient and useful description of a function or signal since it has local... 

    Resorcinol-formaldehyde xerogel as a micro-solid-phase extraction sorbent for the determination of herbicides in aquatic environmental samples

    , Article Journal of Separation Science ; Volume 38, Issue 13 , 2015 , Pages 2305-2311 ; 16159306 (ISSN) Es Haghi, A ; Zare, M ; Piri Moghadam, H ; Bagheri, H ; Sharif University of Technology
    2015
    Abstract
    In this study, organic aerogels were synthesized by the sol-gel polycondensation of mixed cresol with formaldehyde in a slightly basic aqueous solution. Carbon aerogels and xerogels are generated by pyrolysis of organic aerogels. The novel sol-gel-based micro-solid-phase extraction sorbent, resorcinol-formaldehyde xerogel, was employed for preconcentration of some selected herbicides. Three herbicides of the aryloxyphenoxypropionate group, clodinafop-propargyl, haloxyfop-etotyl, and fenoxaprop-P-ethyl, were extracted from aqueous samples by micro-solid-phase extraction and subsequently determined by gas chromatography with mass spectrometry. The effect of different parameters influencing the... 

    A combined micro-solid phase-single drop microextraction approach for trace enrichment of volatile organic compounds

    , Article Analytical Methods ; Volume 7, Issue 16 , Jun , 2015 , Pages 6514-6519 ; 17599660 (ISSN) Bagheri, H ; Zare, M ; Piri Moghadam, H ; Es haghi, A ; Sharif University of Technology
    Royal Society of Chemistry  2015
    Abstract
    An attempt was made to combine μ-solid phase extraction and headspace single drop microextraction techniques and use their advantages for trace determination of some volatile organic compounds in aqueous samples. After performing the two-step preconcentration approach, the desired analytes were determined by gas chromatography-mass spectrometry. A resorcinol-formaldehyde-based xerogel was used as the extraction medium in the μ-solid phase extraction (μ-SPE) method. Then, the extracted BTEX was eluted with a rather large amount of methanol. To remove the laborious process including solvent evaporation and further reconstitution, which is usually accompanied by loss of analytes and accuracy,... 

    Performance of three-level spectrally encoded spreadtime CDMA in the presence of multiple interferences [electronic resource]

    , Article IET Communications ; July 2011, Volume 5, Issue 10, P. 1328-1335 Mashhadi, S. (Saeed) ; Mashhadi, Saeed ; Salehi, J. A ; Sharif University of Technology
    Abstract
    In this study the authors present an in-depth study, analysis and discussion on maximum likelihood (ML)-based receiver for a typical spectrally encoded spread-time CDMA in the presence of multiple narrowband interference (NBI) signals in an additive white Gaussian noise channel. Furthermore, the authors demonstrate that by combining useful properties of ML-based receiver and three-level codes, that is, codes with values of -1, 0, +1, the authors can introduce a new strategy in which superior performance with respect to previous receiver structure based on two-level codes, that is, codes with values of -1, +1, can be attained. With the help of an example, the authors drive, first, the... 

    Investigation of Multiphase Flow in Oil Wells (with Focus on Two Phase Flow), Flow Pattern Recognition and Modeling

    , M.Sc. Thesis Sharif University of Technology Shams, Reza (Author) ; Shad, Saeed (Supervisor) ; Jamshidi, Saeed (Supervisor)
    Abstract
    The concurrent flow of oil and water is a common occurrence in the field of multiphase flow in different fields including petroleum industry. In oil and gas, production engineers often face a situation in which more than one phase is flowing through the producers. In such conditions an accurate assessment of pressure loss inside the well plays a vital role in efficient and effective production planning. Changes in well orientation, wellbore diameter, reservoir and fluid properties as well as fluid flow rates are among parameters in which will affect the flow patterns that can occur inside a well during its life time. These flow patterns are created as a result of a competition between... 

    Casing Design Optimization Considering Drilling and Production Conditions

    , M.Sc. Thesis Sharif University of Technology Sadeghi, Mahdi (Author) ; Jamshidi, Saeed (Supervisor) ; Shad, Saeed (Supervisor)
    Abstract
    Casing design is one of the most expensive parts in the drilling of oil wells, and any cost reduction with the basic design of these casing strings will significantly reduce the total cost of the operation. In recent years, occurring scenarios-based casing design has become popular; Because in many cases, it eliminates non-occurring scenarios such as gas kick and saves on drilling costs. In this study, we have tried to investigate all scenarios that may occur during the lifetime of the well, whether drilling or production, and for each well, based on its own field information, possible scenarios for each casing part are selected separately and the applying loads are calculated. For this... 

    PRI (Palm Rotation Indicator): a metric for postural stability in dynamic nonprehensile manipulation [electronic resource]

    , Article Journal of MECHANIKA ; 2012, Vol. 18, No. 4, pp. 461-466 Beigzadeh, B. (Borhan) ; Meghdar, Ali ; Sohrabpour, Saeed ; Sharif University of Technology
    Abstract
    In this study, we discuss the postural stability of a nonprehensile manipulation problem, which deals with multibody objects. As a metric for postural stability, we define PRI. Then, the system is posturally stable, if PRI is inside the convex hull of the object-manipulator contact surface. We then discuss that dynamic biped locomotion is a special case of dynamic nonprehensile manipulation in all aspects; we prove that ZMP (zero-moment point) and FRI (zoot rotation indicator) are special cases of PRI (palm rotation indicator). Simulations and experiments corresponding to simple examples support the results  

    Sum Coloring of Graphs

    , M.Sc. Thesis Sharif University of Technology Heydari, Asrin (Author) ; Akbari, Saeed (Supervisor)

    On the Domination Polynomial of Graphs

    , M.Sc. Thesis Sharif University of Technology Ebrahimi, Zeinab (Author) ; Akbari, Saeed (Supervisor)

    Some Applications of Combinatorial Nullstellensatz in Graph Theory and Combinatorics

    , M.Sc. Thesis Sharif University of Technology Fakhari, Amin (Author) ; Akbari, Saeed (Supervisor)