Loading...
Search for:
pishnamazi--mohammad
0.092 seconds
Total 5113 records
Copper Adsorption by Nanoadsorbents Based Graphene Oxide from Industrial Wastewater
, M.Sc. Thesis Sharif University of Technology ; Borghei, Mehdi (Supervisor) ; Ghasemi, Shahnaz (Co-Supervisor)
Abstract
In this thesis, a novel graphene oxide (GO)/sodium alginate (SA)/polyacrylamide (PAM) ternary nanocomposite hydrogel with excellent mechanical performance has been fabricated through freeradical polymerization of acrylamide (AAm) and SA in the presence of GO in an aqueous system followed with ionically crosslinking of calcium ions. Physical and chemical characteristics of the composite were investigated by Fourier transform infrared spectroscopy and scanning electron microscopy. The swelling behaviors of the composite hydrogels were investigated under varying conditions of time and pH. The optimized swelling capacity in standard conditions was found to be 1711% per gram of the hydrogel. The...
Synthesis of cellulose acetate/chitosan/SWCNT/Fe3O4/TiO2 composite nanofibers for the removal of Cr(VI), As(V), Methylene blue and Congo red from aqueous solutions
, Article International Journal of Biological Macromolecules ; Volume 140 , 2019 , Pages 1296-1304 ; 01418130 (ISSN) ; Koushkbaghi, S ; Pishnamazi, M ; Askari, A ; Khosravi, R ; Irani, M ; Sharif University of Technology
Elsevier B.V
2019
Abstract
The potential of electrospun cellulose acetate/chitosan/single walled carbon nanotubes/ferrite/titanium dioxide (CA/chitosan/SWCNT/Fe3O4/TiO2) nanofibers was investigated for the removal of Cr(VI), As(V), Methylene blue and Congo red from aqueous solutions via the adsorption and photocatalytic reduction processes. The properties of synthesized SWCNT/Fe3O4/TiO2 and fibers were characterized using TEM, SEM, FTIR, XRD, TGA and BET analysis. In adsorption process, the influence of adsorbent type including SWCNT to Fe3O4 ratio, TiO2 to SWCNT/Fe3O4 ratio and SWCNT/Fe3O4/TiO2 concentration as well as the adsorption parameters including pH, contact time, and initial concentration of adsorbates on...
Metal organic framework nanoparticles loaded- PVDF/chitosan nanofibrous ultrafiltration membranes for the removal of BSA protein and Cr(VI) ions
, Article Journal of Molecular Liquids ; Volume 317 , 2020 ; Koushkbaghi, S ; Hosseini, S. S ; Darabi, M ; Yousefi, A ; Irani, M ; Sharif University of Technology
Elsevier B.V
2020
Abstract
The UiO-66 NH2 and ZIF-8 metal organic framework nanoparticles (NMOFs) were incorporated into the polyvinylidene fluoride (PVDF) nanofibrous membrane. Then, the chitosan nanofibers were coated on the PVDF nanofibers to produce the PVDF/chitosan nanofibers. The performance of synthesized PVDF/NMOFs single layer and PVDF/chitosan/NMOFs two layers nanofibrous membranes was investigated for BSA protein molecules and Cr(VI) ions separation via ultrafiltration membrane process. The potential of synthesized nanofibers was also examined for BSA and Cr(VI) adsorption in a batch system. The characteristics of synthesized nanofibrous membranes were determined using SEM, EDX, TGA, BET, porosity and...
Aminated-Fe3O4 nanoparticles filled chitosan/PVA/PES dual layers nanofibrous membrane for the removal of Cr(VI) and Pb(II) ions from aqueous solutions in adsorption and membrane processes
, Article Chemical Engineering Journal ; Volume 337 , 1 April , 2018 , Pages 169-182 ; 13858947 (ISSN) ; Zakialamdari, A. A ; Pishnamazi, M ; Fasih Ramandi, H ; Aliabadi, M ; Irani, M ; Sharif University of Technology
Elsevier B.V
2018
Abstract
In the present study, dual layers mixed matrix membranes (MMMs) were prepared by incorporating aminated-Fe3O4 nanoparticles into the chitosan/polyvinyl alcohol nanofibers over the polyethersulfone (PES) membrane for the removal of Cr(VI) and Pb(II) ions in batch adsorption and membrane processes. The synthesized aminated-Fe3O4 nanoparticles were characterized using XRD, FESEM and FTIR analysis. The morphology and roughness of membranes were determined using SEM, TEM and AFM analysis. The effect of adsorption operating parameters such as pH (2–7), contact time (0–60 min), initial concentration of metal ions (20–1000 mgL−1) and temperature (30–50 °C) on the Cr(VI) and Pb(II) ions sorption was...
Removal of Cu (ll) from industrial wastewater using poly (acrylamide-co-2-acrylamide-2-methyl propane sulfonic acid)/graphene oxide/sodium alginate hydrogel: Isotherm, kinetics, and optimization study
, Article Journal of Water Process Engineering ; Volume 42 , 2021 ; 22147144 (ISSN) ; Ghasemi, S ; Khosravi, A ; ZabihiSahebi, A ; Hasan Zadeh, A ; Borghei, S. M ; Sharif University of Technology
Elsevier Ltd
2021
Abstract
Here, Graphene oxide/poly (acrylamide -2-acrylamide-methyl-propanesulfonic acid)/sodium alginate (GO/PA-AMPS/SA) hydrogel was synthesized through a free-radical polymerization approach. The impact of Graphene Oxide (GO) content on mechanical strength, swelling behavior, and the adsorption performance of prepared hydrogel was studied. The operating parameters, including contact time, solution pH, and initial Cu(II) content on the adsorption capacity of the hydrogel, were studied. The maximum Cu(II) adsorption capacity of 230.8 mg/g was obtained for GO/PA-AMPS/SA under a pH of 5, the contact time of 270 min, and adsorbent content of 0.5 g/L at 25 °C. The high value of adsorption capacity after...
Construction of an Experimental Device for Foaming Agent and an Experimental Study of the Properties of Foaming Agent
, M.Sc. Thesis Sharif University of Technology ; Bazargan, Mohammad (Supervisor)
Abstract
The primary purpose of acidizing operations in the oil and gas industry is to enhance hydrocarbon production. Acidizing has been a common and conventional method for years, especially when production engineers face issues like declining reservoir pressure leading to reduced production rates. Initially, the treatment solution is referred to as matrix acidizing. In acidizing operations, different additives are combined with the acid to control its behavior in the reservoir. These additives may include iron control agents, corrosion inhibitors, friction reducers, and more. Incompatibility among these additives, the acid, and reservoir fluids can lead to severe damage to the reservoir....
Numerical Analysis of An Annular Gas Turbine Combustor
, M.Sc. Thesis Sharif University of Technology ; Farshchi, Mohammad (Supervisor)
Abstract
The goal of this research is the simulation of the annular combustion chamber of the turbine engine utilized by liquid fuel. The achievement to this goal will lead to create numerical tools for parametric study, analysis and combustion chamber designing.For this reason simple geometry has been considered. This simplicity of geometry causes to facilitate in parametric study and decrease in saving time for modeling and meshing. This combustion chamber is a simplified model of engine CF6. In recent study, the k – ε realizable model has been used for turbulence modeling. For non-adiabatic condition, chemical reaction is dissolved by utilizing probability density function along with laminar...
A misbehavior‐tolerant multipath routing protocol for wireless Ad hoc networks [electronic resource]
, Article International Journal of Research in Wireless Systems (IJRWS) ; Vol. 2, Issue 9, pp. , Sep. 2013 ; Pakravan, Mohammad Reza ; Aref, Mohammad Reza ; Sharif University of Technology
Abstract
Secure routing is a major key to service maintenance in ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. As a result of the resource limitations in such networks nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a novel data redirection method to mitigate the impact of node misbehavior on network...
Theoretical and Experimental Study to Conversion of AUC to UO2 by Microwave Heating
, Ph.D. Dissertation Sharif University of Technology ; Otukesh, Mohammad (Supervisor) ; Ghannadi Maragheh, Mohammad (Co-Advisor) ; Ghasemi, Mohammad Reza (Co-Advisor)Estimating Possible Effects of Subsidies in Competition and Development of Fixed Broadband Internet
, M.Sc. Thesis Sharif University of Technology ; Vesal, Mohammad (Supervisor) ; Rahmati, Mohammad Hossein (Supervisor)
Abstract
In this work, the dynamic competition between firms providing internet services is studied. The framework is Markov equilibrium whereby structural parameters are obtained using two-step estimations, allowing for analyzing the situation in case of subsidies for service upgrade. The results show that such subsidy has little effect on the number of firms while increasing the number of fast firms
SAR Imaging Using the TomoSAR Technique to Resolve Multiple Scatterers
, M.Sc. Thesis Sharif University of Technology ; Bastani, Mohammad Hassan (Supervisor) ; Karbasi, Mohammad (Co-Supervisor)
Abstract
During the last few years, the study of urban environment structures is considered as a research field of interest in remote sensing. In satellite observations of the earth's surface, continuous imaging in terms of time and space has caused the remote sensing technique to be proposed as a useful and efficient tool for the analysis of urban areas. Obtaining quantitative spatial information from the urban environment in fields such as determining the height of buildings plays an essential role in urban planning, monitoring damage to buildings, establishing communication bases and digital cities. During the last two decades, the use of Tomosar approach in order to reconstruct the structures of...
Joint Optimization of Computation Offloading and Resource Allocation in Mobile Edge Computing Networks
, M.Sc. Thesis Sharif University of Technology ; Pakravan, Mohammad Reza (Supervisor) ; Hadi, Mohammad (Co-Supervisor)
Abstract
Mobile edge computing (MEC) is a promising technology that aims to resolve cloud computing’s issues by deploying computation resources at the edge of mobile network and in the proximity of users. The advantages of MEC include reduced latency, energy consumption, and load on access and mobile core networks, to name but a few. Despite all the aforementioned advantages, the mobility of mobile network users causes the traditional MEC architecture to suffer from several issues, such as decreased efficiency and frequent service interruption. One of the methods to manage users’ mobility is virtual machine (VM) migration, where the VM containing the user’s task is migrated to somewhere closer to...
Estimating Price Elasticity of Natural Gas Demand in Iran's Residential Sector: A Regression Discontinuity Approach
, M.Sc. Thesis Sharif University of Technology ; Rahmati, Mohammad Hossein (Supervisor) ; Vesal, Mohammad (Supervisor)
Abstract
Estimating the price elasticity of gas demand involves complexities depending on the gas market structure and pricing mechanisms in different countries. Distinguishing between supply and demand shocks and block pricing are among the main challenges that can cause endogeneity in elasticity estimates. Iran's domestic gas network, one of the largest and most extensive household gas markets, is divided into five climatic zones based on weather conditions. The pricing steps for these five climates during the five cold months are such that a customer in a warmer climate pays higher prices. Conversely, the pricing steps for the seven warm months are the same for all climates. This policy creates a...
Estimate the Effect of Religiosity on Voter Turnout
, M.Sc. Thesis Sharif University of Technology ; Rahmati, Mohammad Hossein (Supervisor) ; Vesal, Mohammad (Supervisor)
Abstract
The correlation between religious adherence and voter turnout is widely studied. However, whether the relation is causal is an open question. We use Household Expenditures and Income Survey (HEIS) data in Iran, which encompasses nine distinct religious expenditures. These expenditures have low correlation with each other and represent different aspects of religious adherence. We use Imamzadeh (some historical holy shrines) as Instruments to estimate the causal effect of religious expenditures on voter turnout. The results reveal that religious expenditures influence both presidential and parliamentary voter turnout, with a notably stronger impact on presidential elections
Simulation and Control of an Aromatic Extractive Distillation Column
,
M.Sc. Thesis
Sharif University of Technology
;
Shahrokhi, Mohammad
(Supervisor)
Abstract
In this study steady state and dynamic simulation of an NFM extractive distillation unit for seperation of aromatics and non-aromatic components has been carried out. Column output composition obtained with experimental binary coefficients is compared with those obtainded by UNIFAC equation. The results indicate that using UNIFAC for all binrary coefficients results in an unacceptable error in concentration of benzene. If the experimental binary coefficents of benzene with NFM are used and the rest are calculated by UNIFAC equation, the simulation results will be very close to those obtained via experimental binary coefficients. Also it is shown that considering a constant efficiency for all...
Investigation of Transport Phenomena in Clarification of Beer by Membrane Using CFD Method
, M.Sc. Thesis Sharif University of Technology ; Soltanieh, Mohammad (Supervisor)
Abstract
During the brewing process, beer alternately goes through different chemical and biochemical reactions and solid–liquid separation stages. The clarification at the final step of brewing is a highly critical stage when it comes to producing a clear and bright beer. Recently, membrane technology has been successfully used in beer clarification, wherein Kieselguhr (diatomaceous earth) filtration is replaced by cross-flow microfiltration. The most important disadvantages of using microfiltration in clarification of beer is the fouling and flux decline during the process. The phenomenology of fouling mechanisms is still undefined and selection of an appropriate technique for flux enhancement in...
Design and Manufacture of a Burner for Transforming Natural Gas to Reduction Gas
, M.Sc. Thesis Sharif University of Technology ; Halali, Mohammad (Supervisor)
Abstract
Different methods can be used to produce reduction gas. One example is using coal. But today there’s a tendency to use natural gas. One way of transforming natural gas to reduction gas is to burn it with gases produced by combustion, such as or vapor; usually a catalyst is used in this method. Another method is burning natural gas directly with oxygen or air. The recent method is of benefit especially in Iran, because of available natural gas resources and avoiding catalyst problems. Designing a burner for this purpose is an important step in reaching this goal. In this project such a burner is designed and manufactured. The burner manufactured in this project burns natural gas with...
Investigation the Effects of Parking Pricing and Improving Public Transportation Policies on Private Car Use Reduction in Central Business District
, M.Sc. Thesis Sharif University of Technology ; Kermanshah, Mohammad (Supervisor)
Abstract
Nowadays, with population growth and vehicle traffic increase, only providing transportation supply couldn’t answer the transportation demand. One of the most important solutions to reduce traffic is transportation demand management (TDM). In this research, the effects of parking pricing and improving public transportation services on private car demand reduction in city center are examined. The data are collected from private cars users in the city center of Isfahan through interviews. By stated preference method, the impacts of parking price and public transit travel time and other related factors were investigated. For this purpose, binary logit, multinomial logit and nested logit models...
Non-Scratch, Antibacterial And Self-cleaning SiO2/TiO2 Nano Composite Coating on Surgical Tools By Sol-Gel
, M.Sc. Thesis Sharif University of Technology ; Ghorbani, Mohammad (Supervisor)
Abstract
In this study TiO2/SiO2 thin films were prepared by sol-gel method from Tetra isopropylortho Titanate(TIPT) as the principle of TiO2 material with Tera ethoxysilane(TEOS) as the principle of SiO2 material to achieve high scratch-resistant , antibacterial and self-cleaning surface area under the effect of various percentage of SiO2 . Film deposition was carried out using a dip-coating technique and heat-treatment was used at 700ºC to achieve crystalline of films with excellent adherence the of substrate.
The surface morphology of the films has been observed by Scanning Electron Microscope (SEM) and the tribological properties of the surface were investigated by Atomic Force Microscope...
The surface morphology of the films has been observed by Scanning Electron Microscope (SEM) and the tribological properties of the surface were investigated by Atomic Force Microscope...
Iran’s Air Quality Modeling Using CMAQ-WRF Coupled Model
, M.Sc. Thesis Sharif University of Technology ; Arhami, Mohammad (Supervisor)
Abstract
Industrialization has brought about air pollution which is one of the most important factors threatening human health. The most efficient method to improve air quality include preventing the emission of pollutants by making laws and regulations. In order to set appropriate regulations, there needs to be a correct understanding of the problem. The purpose of this research is to identify such factors and create a correct understnding of the problem in Iran by constructing a Model of Iranian air qulity. The model used in this research, CMAQ is one of the most comprehensive and state of the art models in transport of pollutnts and chemical reactions in the atmosphere. The inputs into CMAQ...