Sharif Digital Repository

Today, with the development of micro-technology in chemical reactions, the use of appropriate systems for the separation and purification of synthesized chemicals seems to be necessary. In this study, the continuous synthesis of bromide-lithium exchange reaction and the separation of organic and aqueous phase products in micro systems was investigated.The method used to construct micro-separator and micro reactor, a laser engraving technique, and thermal bonding of glass to glass.In the first step, the factors affecting the separation of organic and aqueous phase in the capillary micro-separator, such as the width of the capillary, the length of the capillary, the number of capillaries and... 

A droplet placed on the boundary of two solids with different wettabilities will move to the more wettable part. This is a well-known phenomenon and has been extensively used in a variety of processes and applications ranging from biological systems and ink jet printing to the commercial lab-on-a-chip. Because of its importance, many studies are conducted around this phenomenon. The difference between the equilibrium contact angles of the droplet on the two parts gives rise to an interfacial driving force which moves the droplet. Such a motion is not continuous as the droplet slides to the more wettable area, the driving force diminishes and consequently the droplet stops. A non-stop motion... 

Nowadays, using of microwave integrated circuits in military and industry applications has been became popular, especially with the advent of monolithic microwave integrated circuits which provide possibility of fabrication of amplifiers in large volume with high precision and appropriate cost. Power amplifiers as the last block of transmitters, are such circuits that are too attractive in this area. Since high power amplifiers consume a lot of power in transistors, large amount of heat will be in the surface of chip. Loss of some of consumed power in amplifiers results increasing transistor’s channel and chip surface temperature. Increase in channel temperature results degradation in... 

Although unsaturated soils exist all around the world, civil engineers are not familiar with unsaturated soil behavior; consequently, the soil structures they design may neither be safe nor economical. Thus, implementing unsaturated soil constitutive models to practical computer softwares can be very beneficial for geotechnical engineers. Geotechnical engineering softwares normally consider soil in saturated or dry conditions. So, their built-in constitutive models do not usually consider unsaturated soils. In this study, Barcelona Basic Model (BBM), which is developed using critical states soils mechanics principles, is implemented to the FLAC2D software. This model can simulate complex... 

Lifetime extension would be a necessary preventive action to halt micro cracks expansion on the airplane external surface. To decide about whether to perform this operation, one should examine technological maturity, costs and technical parameters. Technical status in lifetime extension is one of the major drivers of this decision which should be considered in the first step of technology management process which is known as the technology attractiveness step. In this research, major technologies of rejuvenation is examined and categorized by the technology mapping. Also, key processes of rejuvenation and technological fields ranking has been determined by the procedural view tools of the... 

In this thesis, we study monadic second order logic and the languages of graphs. We introduce the notion of ∆- regular graph automaton. Then we designed this finite automaton for processing on labeled graphs. Definability of graph languages which are recognizable by this automaton is shown. To do this, we first briefly introduced monadic second order logic, and then we studied definability of regular string and tree languages in monadic second order logic. In the last section of thesis, ∆- regular graph automaton is introduced  

Centrifugal compressors have wide applications in the turbochargers, aircraft propulsion and petrochemical industry. Therefore it is important to design high efficiency centrifugal compressor. Knowledge of compressor performance at different conditions, energy losses and the contribution of each component of compressor in efficiency losses have of great importance.
In this research, different loss models of the centrifugal compressor were reviewed and investigated. Then 1D codes were developed based on the loss models, and performance characteristics of S2B Schweitzer and GT4082 Garret compressors at different conditions were achieved. In order to evaluate the modeling results,... 

Today, the world energy crisis, the need to optimize its consumption and discussion to reduce fuel consumption has become a vital issue. The conventional vehicle air conditioning system due to compressor in refrigeration cycle, which has causes a severe loss in engine useful power, increasing fuel consumption, etc. Therefore, the main goal of this project is the feasibility of the vehicle cooler replacement with the vapor jet refrigeration cycle. In this cycle, the energy required for completing the refrigeration cycle is provided from the heat of the water inside the radiator that is possible with conventional refrigeration cycle. The first stage of this project includes design and... 

In some activities, an almost free of any vibration environment is needed. Semi conductor production process and microelectronic microscopes are two examples in which a quiet environment is essential. The goal of this thesis is to attenuate ambient vibrations effectively and to prepare a suitable environment for two microelectronic microscopes. The designed system must be practical, economical and capable of being made in a short time interval. Considering mentioned properties a steel table with bolt connections supported on 4 air springs was built. To investigate dynamic properties, modal analysis was performed with the aid of finite element packages and experiments. To extract oscillations... 

Production of nanocrystalline (under 100nm) or submicron materials (100-1000nm), has been created to one of the most important problems in engineering. A well-known method to create Ultra-Fined Grains (UFG) is imposing high strains to metals in order to break the structure. Among lots of ways forproducing UFG metals, Equal Channel Angular Pressing (ECAP) is one of the most famous and common ways. On the other hand, Shot Peening has been being used for a long time to improve mechanical properties of metals by introducing nanocrystalline layer at the surface of specimen. The aim of the work, is investigation of the effect of combination of ECAP and Shot Peening on High Cycle Fatigue of 6082... 

The electric field induced response of a charged droplet in an uncharged gel is calculated theoretically. For modeling, the gel is considered as a soft porous solid that is saturated with a Newtonian electrolyte and modeled as a continuum that contains 3 phases: a porous, soft and compressible solid, an incompressible Newtonian fluid and the ions inside fluid. Droplet is modeled as a charged incompressible Newtonian fluid immiscible with the gel. The droplet-gel interface is considered as a surface with electrostatic potential ζ . After obtaining governing equations, they solved by using perturbation methodology and linear superposition. Boundary conditions, especially at the droplet-gel... 

Nanoparticles can be applied as chemical agent in enhnaced oil recovery like surfactants and polymers. One of nanoparticles usefull capabilities is modification of their surface. This research investigates this capabilty of nanoparticles in enhanced oil recovery. Surface modification of nanoparticles with both agents can bring new abilities to these materials. Here surface of silica nanoparticles is modified by hydrophilic agent comprising PEG groups, hydrophobic agent comprising propyl group and both agents. FT-IR tests showed that grafting of modifiyng agents on surface of nanoparticles is well done. To investigate effect of nanoparticles surface modification on nanoparticles capability in... 

Important features of the nanoparticles properties are their high superficial area and being able to reform their surface. In this study, the repairable property used to reform surface of silica nanoparticles (Those are used more frequently than other nanoparticles). Repairing of surface are doing to use nanoparticles as a surface-active material in enhanced oil recovery. Silane compounds with different chain length are used to create hydrophobic nanoparticles and PEG compounds are used to create hydrophilic nanoparticles. Also amphiphilic nanoparticles are created with a combination of both hydrophilic and hydrophobic compounds. To investigate the usefulness of nanofluids are made up of the... 

The main purposes of this project are simulation, design, and fabrication of a microfluidic system based on dielectrophoresis (DEP) exploiting AC voltages for separation of microparticles. Generally, this project can be divided into two parts. First, the engineering section including design and fabrication of microchip, and second biological samples preparation for investigating the system performance. The main advantages of proposed system are eliminating joule heating, a significant problem in insulating based dielectrophoresis systems, overcoming problems related to metal contamination in biological samples, the main problem of conventional dielectrophoresis platforms, and removing... 

The main goals of this research are design, simulation, and fabrication of a microfluidic system working based on dielectrophoresis. This research divided into two different parts, the first of which is the simulation of a microfluidic system, and second of which is an attempt for fabrication of microfluidic system. For the fabrication of the microfluidic system, different methods were used. In the simulation part, the enrichment of different particles was investigated, and the effects of different parameters on the enrichment were assessed. It was observed that as flow rate increases, the enrichment amount diminishes. Furthermore, as the microfluidic depth decreases, the enrichment amount... 

Surface modification is an important property of nano particles. In this project surface of silica nano particles modified with hydrophobic and hydrophilic groups to imrprove surface activity of nano particles. Purpose of this project is to study surface activity of surface modified silica nano particles in different temperatures from 20 to 70 degree centigrade. Also effect of salt and time on the surface activity is studied. At first nano particles modified just with haydrophobic groups and then just with hydrophilic groups (hydrophobic and hydrophilic nano particles) and after that, the surface modification done with both hyadrophilic and hydrophobic groups (amphiphilic nanoparticles).... 

In recent years, desulfurization has received much attention due to its devastating environmental effects. The existence of sulfur compounds has effects such as corrosion, poisoning of catalysts, reduction of heat of combustion and reduction of price. Sulfur compounds in hydrocarbon fuels also produce sulfur oxides caused by combustion then they enter the atmosphere, and cause acid rain. Acid rain dissolves building materials, poisons lakes, and destroys forests. Therefore, removing sulfur or converting it to less harmful substances is one of the most important processes in refineries. The method studied in this research is the use of adsorption desulfurization method by microchannel which... 

Long-term Multi-Channel Bio-Signal monitoring in a comfort way is demanding for emerging applications in everyday life. Typically, in multi-channel amplification, one amplifier per channel is employed. However, the bio-signal amplification requires lower bandwidth in comparison with the available speed of CMOS amplifiers. Therefore, it is sensible to develop a practical circuit trading the excess CMOS bandwidth with power consumption. The proposed circuit, which has three inputs, performs amplification through three stages; First, the inputs are applied to a 3 to 1 time-domain multiplexer. Second, a Current Feedback Instrumentation Amplifier (CFIA) is utilized. Finally, the amplified signal... 

The present paper is an attempt to critically measure interfacial tension with microchannels and achieve the quantity of adsorption in the liquid – liquid interfaces and comparing the adsorption of surfactants and nanoparticles surface modificated as well. At this point we need to make emulsion and it is necessary for droplets to be monodispersed due to analyze these droplets in this paper. According to this condition for our droplets microsystems are the best options. As we know surfactants were already known as a stabilizing emulsion agent and in this paper nanoparticles are suggested as suitable alternatives for surfactants which can be absorbed as if they are in the water / oil... 

In recent years, the Internet of Things has become one of the most popular technologies that has facilitated new interactions between objects and humans to improve their quality of life. With the rapid proliferation of the Internet of Things, an ever-evolving question arises - how to control access and permissions in a space that can contain hundreds of smart devices - which ultimately address security and privacy concerns of technologies and consumers. Today, cloud computing has become an important technology for the Internet of Things and creates a cloud architecture that is used in various fields in this area. A smart city is an urban area that uses a variety of sensors and electronic...