Sharif Digital Repository

The objective of this study was to develop and validate a novel 3D dynamic model of a pelvic side-impactor system. The biomechanical responses of a pelvic flexible model (having.mnf file suffix) under the lateral impact load for predicting the bone fracture mechanism are investigated as well. The 3D solid model of the side-impactor system was imported into MSC/ADAMS software for analyzing the dynamic model, and the pelvic flexible model was extracted from the CT images of a Chinese female volunteer. The flexible model of the pelvis system was developed considering a wide range of mechanical properties in the bone complex and soft tissue to achieve a realistic biomechanical response during a... 

Recently, an inequality satisfied by noncontextual hidden-variable models and violated by quantum mechanics for all states of a four-level system has been derived based on an information-theoretic distance approach to nonclassical correlations. In this Rapid Communication, we experimentally demonstrate the violation of this inequality with single photons. Our experiment offers a method to study a distinction between quantum and classical correlations from an information-theoretic perspective. © 2020 American Physical Society  

Simultaneous extraction of zinc and cadmium by a mixture of di-2-ethyl hexyl phosphoric acid (DEHPA) and mono-2-ethyl hexyl phosphoric acid (MEHPA), and the synergistic effect of MEHPA on co-extraction of zinc and cadmium with DEHPA have been investigated. It was shown that the extraction of zinc and cadmium by DEHPA and/or MEHPA can be increased by an increase of pH. The results also illustrate that the pH0.5 of zinc, by increase in MEHPA from 0.1 to 8 vol%, did not vary significantly while that of cadmium varies from 0.63 to 2.4. In other words MEHPA prevents selective extraction of zinc from aqueous media containing both zinc and cadmium. Studies on the selective separation parameter... 

The present work is concerned with the steady incompressible flow through a parallel plate channel with stretching walls under an externally applied magnetic field. The governing continuity and Navier-Stokes equations are reduced to a fourth order nonlinear differential equation by using vorticity definition and similarity solution transformation. The obtained equations are solved by applying the analytical homotopy perturbation method (HPM). The method is called order of magnitude suggested for simplifying series solution to finite expression that is useful in engineering problems. The results are verified by comparing with numerical solutions and demonstrate a good accuracy of the obtained... 

In the last decade, many potent analytical methods have been utilized to find the approximate solution of nonlinear differential equations. Some of these methods are energy balance method (EBM), homotopy perturbation method (HPM), variational iteration method (VIM), amplitude frequency formulation (AFF), and max-min approach (MMA). Besides the methods mentioned above, the Akbari-Ganji method (AGM) is a highly efficient analytical method to solve a wide range of nonlinear equations, including heat transfer, mass transfer, and vibration problems. In this study, it was constructed the approximate analytic solution for movement of two mechanical oscillators by employing the AGM. In the derived... 

At SCN 2018, Fiore and Pagnin proposed a generic compiler (called “Matrioska”) allowing to transform sufficiently expressive single-key homomorphic signatures (SKHSs) into multi-key homomorphic signatures (MKHSs) under falsifiable assumptions in the standard model. Matrioska is designed for homomorphic signatures that support programs represented as circuits. The MKHS schemes obtained through Matrioska support the evaluation and verification of arbitrary circuits over data signed from multiple users, but they require the underlying SKHS scheme to work with circuits whose size is exponential in the number of users, and thus can only support a constant number of users. In this work, we propose... 

The ride comfort of high-speed trains passing over railway bridges is studied in this paper. A parametric study is carried out using a time domain model. The effects of some design parameters are investigated such as damping and stiffness of the suspension system and also ballast stiffness. The influence of the track irregularity and train speed on two comfort indicators, namely Sperling's comfort index and the maximum acceleration level are also studied. Two types of railway bridges, a simple girder and an elastically supported bridge are considered. Timoshenko beam theory is used for modelling the rail and bridge and two layers of parallel damped springs in conjunction with a layer of mass... 

Animal models and traditional cell cultures are essential tools for drug development. However, these platforms can show striking discrepancies in efficacy and side effects when compared to human trials. These differences can lengthen the drug development process and even lead to drug withdrawal from the market. The establishment of preclinical drug screening platforms that have higher relevancy to physiological conditions is desirable to facilitate drug development. Here, a heart-on-a-chip platform, incorporating microgrooves and electrical pulse stimulations to recapitulate the well-aligned structure and synchronous beating of cardiomyocytes (CMs) for drug screening, is reported. Each chip... 

Purpose: The purpose of this paper is to investigate natural convection in a porous wavy-walled enclosure that is including a cylinder cavity in the middle of it and filled with a hybrid nanofluid contains 1-Butanol as the base fluid and MoS2–Fe3O4 hybrid nanoparticles. Design/methodology/approach: The domain of interest is bounded by constant temperature horizontal corrugated surfaces and isothermal vertical flat surfaces. The numerical outputs are explained in the type of isotherms, streamline and average Nusselt number with variations of the Rayleigh number, Hartmann number, nanoparticle shape factor and porosity of the porous medium. For solving the governing equations, the finite... 

Direct Simulation Monte Carlo (DSMC) method is applied to evaluate the performance of a new micro gas sensor (MIKRA) for mass analysis of ammonia in the rarefied gas. In order to simulate a rarefied gas inside the micro gas detector, Boltzmann equation is applied to obtain high precision results. This study performed comprehensive studies to reveal the main mechanism of force generation and applied this for the analysis of the gas mixture. Our findings show that value of generated Knudsen force significantly varies when the percentage of the NH3 varies in the mixture. According to obtained results, the maximum Knudsen force increases when the fraction of the ammonia decreases. Our findings... 

This paper deals with the mixed convective heat transfer of nanofluids through a concentric vertical annulus. Because of the non-adherence of the fluid-solid interface in the presence of nanoparticle migrations, known as slip condition, the Navier's slip boundary condition was considered at the pipe walls. The employed model for nanofluid includes the modified two-component four-equation non-homogeneous equilibrium model that fully accounts for the effects of nanoparticles volume fraction distribution. Assuming the fully developed flow and heat transfer, the basic partial differential equations including continuity, momentum, and energy equations have been reduced to two-point ordinary... 

Residual stresses, created in a steel beam by elastic-plastic bending, are predicted using an approximate analysis and the finite element method. The predictions are compared to experimental measurements obtained from the application of incremental centre hole drilling, deep hole drilling and neutron diffraction methods. Finite element simulations of the incremental centre hole drilling and deep hole drilling methods applied to the predicted residual stresses permitted an assessment of their ability to reconstruct the stresses. An analytical reconstruction analysis using an Airy stress function together with boundary and equilibrium conditions is developed and applied to the predictions and... 

A typical process in many industrial applications is rising bubble dynamic in viscous liquids like two-phase reactors. Examining the physical behavior of bubbles may improve the understanding of systems regarding design and operation. This study focused on the splitting of bubbles resulting from their impact on solid obstacles. Fragmentation of the bubbles appears in many applications such as lab on a chip in small scale or slug bubbly flow moving upward in a tube in large scales. Using a new index-function model in Lattice Boltzmann technique proposed by “He”, we simulated the deformation and motion of a bubble in different regimes, through which, we accurately captured a sharp interface... 

In this paper, Direct Simulation Monte Carlo (DSMC) simulations were applied to investigate the mechanism of the force generation inside a low-pressure gas sensor. The flow feature and force generation mechanism inside a rectangular enclosure with heat and cold arms as the non-isothermal walls are comprehensively explained. In addition, extensive parametric studies are done to study the effects of physical parameters on the performance and characteristics of this device in different operating conditions. In this research, the Knudsen number is varied from 0.1 to 4.5 (0.5 to 11torr) to reveal all the characteristics of the thermally driven force inside the MEMS sensor. In order to simulate a... 

One of the major challenges in the manufacturing parts, especially metals, is turning with good/excellent surface quality, which has a significant effect on the fatigue strength of the industrial components. Selecting incorrect or unsuitable values of machining parameters leads to vibration instability in the cutting tool and as a result, excessive roughness is created on the product’s surface. Therefore, one of the ways to reduce the roughness factor and increase the product fatigue life is to control the relative slip and vibration between the cutting tool and the workpiece. To achieve this goal, the authors attempted to investigate the simultaneous effects of tool overhang and cutting... 

The steady 2-D boundary layer flow over a flat plate is studied analytically by homotopy perturbation method to analyze the entropy generation inside the boundary layer with constant wall temperature. By the transformations of go-verning equations including continuity, momentum, and energy by similarity va-riables, a dimensionless equation for entropy generation inside the boundary layer is obtained. The effects of important parameters such as Reynolds and Eck-ert numbers are investigated and the physical interpretations of the results are explained in details  

We have studied the simplest optomechanical system close to and in the bistable regime. We find that Optomechanical entanglement is particularly strong in this regime for large enough detuning. The robustness of entanglement against temperature is also studied  

The water cycle algorithm (WCA) is a nature-inspired meta-heuristic recently contributed to the community in 2012, which finds its motivation in the natural surface runoff phase in water cycle process and on how streams and rivers flow into the sea. This method has been so far successfully applied to many engineering applications, spread over a wide variety of application fields. In this paper an enhanced discrete version of the WCA (coined as DWCA) is proposed for solving the Symmetric and Asymmetric Traveling Salesman Problem. Aimed at proving that the developed approach is a promising approximation method for solving this family of optimization problems, the designed solver has been... 

The purpose of this research is to explain the surface modification of fabricated polyamide reverse osmosis (RO) membranes using UV-initiated graft polymerization at different irradiation times (15, 30, 60, and 90 s) and various acrylamide concentrations (10, 20, and 30 g L−1). Also, coating of membranes surface with various concentrations of TiO2 nanoparticles (10, 20, 30, and 50 ppm) followed by the same UV irradiation times was investigated. After that, the membranes modification was done by grafting of acrylamide blended with TiO2 nanoparticles via UV irradiation. The characterization of membranes surface properties and their performance were systematically carried out. The results...