Sharif Digital Repository

Background/Objectives: In this paper by utilizing frequency tracking electrical loads are shared on voltage source converters and then by applying a proposed-supplementary control system, frequency changes during changing electrical loads inside network is omitted. Methods/Statistical Analysis: Using decentralized control in Microgrids and sharing loads on power generation units respect to their nominal capacity are unavoidable approaches to have stable and operational network. Droop control in load sharing is known as practical and significant solution. In droop control, units output frequency, changes proportional to output active power that is not preferable. Simulation results in PSCAD... 

Non-Convex Economic Dispatch (NED) has been addressed as an open and demanding optimization problem in power systems. Due to the fact that realistic ED problems have non-convex cost functions with equality and inequality constraints, conventional search methods are unable to effectively find the global solution. In recent years, because of their great potential to achieve optimal or close-to-optimal solution, meta-heuristic optimization techniques have attracted significant attention to tackle the complexity of NED problems. In this paper, an efficient approach is proposed based on Imperialist Competitive Algorithm (ICA). The proposed algorithm named multi-operator ICA (MuICA) merges the... 

Large technology-intensive enterprises and companies face a constant challenge: How can a set of selected high-tech projects get done in a manner that would minimize the total cost across all projects? In majority of cases, projects are assumed independent, leading to a separate cost evaluation. This assumption often does not hold for real-world project portfolios, frequently sharing overlapping technologies. In this paper, we show how the order of the execution of the projects can directly affect the total cost of the portfolio, due to shared dependencies. Modeling the problems in this area can be achieved by combining two main fields: graph theory and technology mining. A novel method is... 

Performance characteristics of turbocharger turbine and compressor such as efficiency, mass parameter and power are determined experimentally at turbocharger laboratory. Accurate determination of the performance map is significant for manufacturers as well as end users. To this end accurate measurement of test parameters such as temperature, pressure, and speed are required. In this paper an analytic method to predict the measurement uncertainties in turbocharger laboratory, is described. Furthermore the effect of each test parameter on the performance uncertainty is considered. Test parameters that have the most significant influence on the performance uncertainties are identified.... 

An efficient algorithm for the design optimization of the compressible fluid flow problem through a flexible structure is presented. The methodology has three essential parts: first the behavior of compressible flow in a supersonic diffuser was studied numerically in quasi-one-dimensional form using a flux splitting method. Second, a fully coupled sequential iterative procedure was used to solve the steady state aeroelastic problem of a flexible wall diffuser. Finally, a robust Genetic Algorithm was implemented and used to calculate the optimum shape of the flexible wall diffuser for a prescribed pressure distribution. © 2006 Elsevier Ltd. All rights reserved  

Over the recent decades, many different ducted turbines have been designed to augment efficiency of wind turbines. The design and number of blades are the most important parameters to optimize efficiency of wind turbines. In this paper, effects of design, number and attack angles of blades on rotational speed are experimentally studied in a duct which increases wind velocity up to 2.46 times numerically and 2.32 times experimentally as great as far-field flow. In order to realize this, 3 different types of aerodynamic blades were designed and then, 2-bladed, 3-bladed and 4-bladed impellers were created by these blades; finally, 9 impellers were built on aggregate. The rotational speed of... 

In this paper a new least mean square (LMS) based adaptive weighting algorithm is proposed. It is appropriate for antenna array systems with moving targets and mobile applications. The essential goal of this algorithm is to reduce the complexity of weighting process and to decrease the time needed for adjusting the antenna radiation pattern. The main lobe of antenna will be adjusted in the direction of desired signal (main signal) and nulls pointed in the direction of undesired signals (interference signals). By predicting the relative velocity of source, the next location of the source will be estimated and the array weights will be determined using LMS algorithm before arriving to the new... 

Reducing the computational complexity as well as convergence time is the main task of adaptive antenna array processing. This article proposes an improved algorithm for estimating the weights of adaptive array elements based on Constant Modulus Algorithm (CMA). In this new type of algorithm, those weights that have higher effect on the radiation pattern will be estimated and antenna pattern will be adjusted by changing these weights. In this research, 3 new algorithms are proposed. By simulating these algorithms and comparing them with conventional full weight CMA, finally new algorithm that has a reduced complexity and an acceptable performance at different signal to noise ratios (SNRs) is... 

Purpose - This study aims to investigate the relationship between university and industry as two major infrastructures of national innovation system in all leading scientific and industrial settings. Design/methodology/approach - Large complex organizations with high technology that follow non-linear dynamic rules need to define concepts and adopt new approaches to achieve organizational efficiency and effectiveness. Among various models, a dynamic model of innovation was developed based on a joint investment between industry and university. Hence, the concepts of systems thinking and system dynamics were used.Findings- The results reveal three levels of industry and university communication... 

The oxidation behavior of three types of stainless steels, namely AISI 321, AISI 316, and AISI 409, was compared. In all stainless steels, oxide layers were formed and their masses and thicknesses increased with oxidation time. Among them, AISI 409 ferritic stainless steel demonstrated higher oxidation rate. According to the kinetical oxidation behavior of them at elevated temperatures, the oxidation mechanism was determined. Among them, the AISI 409 ferritic stainless steel showed the lowest and AISI 321 austenitic stainless steel demonstrated the highest oxidation resistance. Based on the experimental results, it was suggested that the kinetic of oxide growth in stainless steels was... 

This study investigates the effects of wall heating and skin friction on the characteristics of a compressible turbulent flow in developing and developed regions of a pipe. The numerical solution is performed by finite-element-based finite volume method applied on unstructured grids. A modified κ-ε model with a two-layer equation for the near-wall region and a compressibility correction are used to predict turbulent viscosity. The results show that shear stress in fully developed flow is nearly constant from the centerline up to 75% of the pipe radius, then increases sharply next to the wall, and the ratio of the turbulent viscosity to the molecular one is less than 0.2. Under a uniform wall... 

In this research, we have investigated the planar maneuver of a flexible satellite with appendages anti-symmetric vibration. The hybrid governing equations are comprised of coupled partial and ordinary differential equations which are derived by employing Hamilton's principle. In this paper, control goals are the tracking desired pitch angle along with the flexible appendages vibration suppression simultaneously by using only one control torque which is applied to the central hub. The boundary control is proposed to fulfill these control aims; furthermore, this boundary control ensures that spillover instability phenomenon is eliminated, and in-domain sensors and actuators implement are... 

In this paper, the planar maneuver of a flexible satellite with regard to its flexible appendages vibration has been studied. The flexible satellite translates and rotates in a plane; in addition, the flexible appendages can also vibrate in that plane. The system governing equations, which are coupled partial and ordinary differential equations, are obtained based on Hamilton's principle. Then the original system converts to three equivalent subsystems, two of which contains one partial differential equation and one ordinary differential equation along with four boundary conditions, by using change of variables. Employing control forces and one control torque which are applied to the central... 

In both public and private sectors, critical technology-based tasks, such as innovation, forecasting, and road-mapping, are faced with unmanageable complexity due to the ever-expanding web of technologies which can range into thousands. This context cannot be easily handled manually or with efficient speed. However, more precise and insightful answers are expected. These answers are the fundamental challenge addressed by tech-mining. For tech-mining, discovering the associations among them is a critical task. These associations are used to form a weighted directed graph of technologies called “association tech-graph” which is used for technology development, trend analysis, policymaking,... 

In both public and private sectors, critical technology-based tasks, such as innovation, forecasting, and road-mapping, are faced with unmanageable complexity due to the ever-expanding web of technologies which can range into thousands. This context cannot be easily handled manually or with efficient speed. However, more precise and insightful answers are expected. These answers are the fundamental challenge addressed by tech-mining. For tech-mining, discovering the associations among them is a critical task. These associations are used to form a weighted directed graph of technologies called 'association tech-graph' which is used for technology development, trend analysis, policymaking,... 

In this study, the feasibility of the synthesis of Fe-TiC-Al 2O3 hybrid nanocomposite via mechanical activation followed by carbothermal reduction was investigated. The raw materials including ilmenite, carbon black and aluminum powder were milled in a high energy planetary ball mill. At different time intervals, samples were taken for characterization. After phase evaluation with XRD, some samples were heat treated in an atmosphere controlled tube furnace. Studies proved that increasing the milling time of the raw materials resulted in the formation of more amorphous phase and more active materials. Furthermore, investigations showed that after carbothermal reduction, the synthesized TiC... 

In this work, a novel local spline smoothing-based approach is proposed in order to despeckling medical ultrasound images. For better comparison, firstly nine conventional statistical spatial filters were applied on the ultrasound images and the results evaluated by quantitative indices of contrast to noise ratio (CNR) and speckle signal to noise ratio (SSNR). Secondly, one-dimensional cubic spline smoothing (1DCSS) function was applied on the whole speckled image as the first proposed approach. Finally, as the second proposed approach, 1DCSS was applied locally on the sliding windows of the ultrasound image then conventional statistical spatial filters were applied. The results indicate... 

Design models of axial flow compressor are developed for high temperature power plants with Closed Brayton Cycle for energy conversion. in recent years, many efforts have been done for modeling and predicting of performance of these compressors on different conditions of speed and pressure ratio because of costly empirical experiments, and still are developing. The models are based on a mean-line through-flow analysis for free-vortex flow, account for the profile, secondary, end wall and tip clearance losses in the cascades. In this work, models of Lieblein, Koch-Smith, Herrig, Johnsen-Bullock, Pollard-Gostelow, Aungier, Hunter-Cumpsty, Reneau are implemented to consider single stage... 

Superparamagnetic iron oxide (SPIO) nanomaterials are widely used as magnetic resonance imaging (MRI) contrast agents (CAs). These CAs significantly shorten transverse relaxation time (T2) and so decrease the intensity of the T2-weighted MRI (negative contrast imaging). However, the partial-volume effect is known to be one of the problems in negative contrast MRI. In this work, SPIO nanoparticles were modified by dextran and graphene oxide (GO) nanosheets to achieve a positive contrast MRI with high intensity. This modification resulted in shortening the longitudinal relaxation time (T1) of the SPIO nanoparticles (in addition to the T2 shortening).... 

Titanium dioxide is a cheap, chemically stable and non-toxic material. However its photocatalytic properties are unstable and it is a modest semiconductor and a mediocre insulator. For several applications it would be interesting to make it either more insulating or more conducting. The goal of this work was to modify the photocatalytic properties of nano-crystalline TiO2 powders by wet chemical routes and hydrothermal methods to understand the mechanism leading to these modifications The principal factors that influence the photocatalytic properties are on the one hand the concentration and nature of the chemical and physical conditions in TiO2, and on the other hand the morphology of the...