Sharif Digital Repository

Ship maneuverability is so important from different aspects. According to the regulations of International Maritime Organization (IMO), every vessel has to meet the minimum requirements of mentioned rules. Consequently, prediction of ship maneuverability in early stages of ship design has become to one of the most necessary steps for shipbuilding and design companies. There are a variety of options in order to prediction of maneuverability of vessels, for instance, one important way is Free running model tests which is capable of direct calculation of the required parameters, provided if some certain conditions are met. In this work, firstly, an introduction to the importance of vessel... 

Supplier selection and order quantity allocation problem is one of the most complex making decision problems comes into account. In the past, supplier selection done based on criteria such as price, quality and delivery time. Today's supply chains with the aim of expanding business activities and improving their performances, Follow process such as outsourcing, product development, and selection of multi-supplier strategies. This conditions will bring opportunities and threats for supply chains. One of the possible risks to supply chains are disruption risks and disruption has been a great concern in the past decade and disruption of suppliers are one of the new topics that have recently... 

Automation of the software development process is the software engineers' final goal, but with the current facilities and knowledge in software engineering, it is not possible to automatically generate the whole software. Usually all the software in a specific domain contain common behaviors, which by careful exploration of these common behaviors and automation of code generation in these sections, the cost and time of projects' execution can be reduced. According to Model Driven Development (MDD), the first step in software development is creating appropriate models. For creating models, metamodel is required; therefore, we need to create a specific motamodel for the chosen domain or use... 

With the growth of the urban population and the increase in private car ownership, negative implications of transportation, such as traffic congestion and environmental pollution has increased. A good solution to this problem is development of traffic infrastructures. However, it is not sufficient by itself and better management strategies for solving these problems are needed. One of the related approaches, is high occupancy toll lane. The main purpose of this study is modeling user’s mode choice behavior in the presence of high occupancy toll lane and pricing some highway lanes in Tehran. Another important purpose of this study is to find affective factors that have an influence on users... 

The cosmic ray astronomy was born in 1937 when Victor Hess flied with his balloon to the height of 17,500 feet. He found that the cosmic rays come from out of atmosphere. There are three fundamental questions from that time. The goal of all cosmic ray's experimental activities and related theories is finding out the answer of these questions. The first question is about the energy and composition spectrum of cosmic rays. The second one is finding the sources which can product the very high energy particles such as the protons with the energy of 1021eV found in some observatory such as AGASA and Haverah Park. The last question is the process of diffusion of cosmic rays in the galaxy. One of... 

Sonoluminescence is a unique phenomenon in physics, which is known as the process of converting sound into light. By applying sound to a volume of liquid, with a specific geometrical shape (such as sphere) and forming standing waves around an existing bubble, the bubble first expands to a maximum radius and then gets extremely small leading to its supersonic collapse. During the collapse, the resulting shock wave approches the center of the bubble, causing extreme increase in the pressure and temperature at the center of the bubble. This causes flashing of light during small time scales (pico-seconds). This phenomenon is used in many fields, such as treatment of cancer. Also, the energy... 

One of the features of a project is its uniqueness, if two sets of activities are the same neither of them will longer be included in the project definition. A method in two projects with the same nature may yield inverse results of each other. Therefore, it is necessary to study the parameters affecting the project carefully before any action. So far, some research has been conducted in this area and it has been tried to perform case study on qualitative and quantitative parameters of the project. By investigating a number of common factors in most civil engineering projects, especially megaprojects, the present study attempts to identify and examine exquisite and effective parameters and... 

Magnesia-Doloma refractories has advantages such as stability in alkaline environments, clean steel production, resistance to acid slag, good cement kiln coating flexibility, low production cost. It also has some weaknesses such as low resistance to thermal shock and quick hydration. In the present study using Birjand Mines Magnesite powders and Dolomites from Zefreh, Esfahan, Magnesia-Doloma clinkers were pressed under the pressure 90 MP and prepared at 1650⁰C in furnace under air atmosphere. The effect of adding 0, 2, 4, 6, and 8% of the Microparticles and Nanoparticles of α-Alumina on microstructure, physical properties, hydration resistance and Thermal shock resistance was studied. Phase... 

This study focused on the investigation of bioleaching of heavy metals from incinerator ash using Thiobacillus thiooxidans. Eight factors were examined for their significance on bioleaching using a Placket-Burman factorial design. Four significant variables (pulp density, Initial pH, sulfur Concentration and inoculation amount) were selected for the optimization studies. The combined effect of these variables on metal bioleaching was studied using a central composite design. Second order polynomials were established to identify the relationship between the recovery percent of the metals and the four significant variables. The optimal values of the variables for maximum metals bioleaching... 

Underground water is one of major resources of drinking water in Iran and thus, its quality (in terms of absence of pollutants) is a matter of great importance. The main goal of this research was to investigate the pollution concentration in underground water and soil in two regions: Dasht-e-naz in Sari and the fields near Sarkhoun gas refinery. The second goal was to determine the source and measure the distribution of the pollutants (in case of presence) and determine potential risks caused by them. The first step was to perform experimental tests in the two regions. In Sari's Dasht-e-naz region, a number of wells were chosen for sampling according to the direction of underground water... 

Laboratory experiments were carried out to investigate the effect of influent alkalinity and reactor pH on microbial species, morphology and performance efficiency of aerobic granules. The experiments were conducted in two L sequencing batch reactors (R1-R2) with different influent alkalinity and pH medium. pH in R1 ,with high influent alkalinity, was in the range of 7-7.5 and pH in R2 was adjusted in 4.5-5.5. The experimental results demonstrated that the dominated microbial species and structure of granules were different in two rectors. Acidic environment of R2 provide favorable condition for fungal growth and granules formed within first week of operation. On the other hand in R1,... 

Causality and locality are two of the fundamental problems in physics and physicists have different interpretations of them. In new physics theories like Quantum mechanics and Quantum field theory, the main point of discussion is that whether these two theories are local and causal or not? In first chapter, we introduce the principle of causality. The second and third chapters cover causality in Quantum mechanics and Quantum field theory.The last chapter is about locality  

In this M.Sc. thesis the behavior patterns of the cavity quantum electrodynamics of complex systems are analyzed, such systems are quantum optic multi-partite systems and consist of an arbitrary number of quantum dots in interaction with arbitrary number of cavity modes.
First, the coefficients matrix of the ket sate of the system was measured, in order to achieve it; the general time-dependent state of the most general possible system was specified. Its related Hamiltonian was written, and finally the Schrodinger equation was measured in different coupling regimes. It was done in Schrodinger picture without any approximation.Second, the presence probabilities of the quantum dots of any... 

There is a growing demand for efficient treatment plans which can deal with high loading of organic pollutant, considering the population growth in communities. Our country is going toward industrialization; hence, it requires more effective and efficient treatment plans as well as innovative ones. Moving Bed Biological Reactors are accounted amongst appropriate methods in removing various pollutant which has been used in recent decades. In regard to increasing demand for new treatment plans, one of the options can be upgrading of existing activated sludge systems. Two bioreactors with 10 liter volume each in parallel lines were used in this work. One of them was a regular MBBR as a blank... 

The microstructure and wear performance of WC/Cu-Zn-Ni composite surface coating has been investigated using a combination of microscopy, hardness, and wear testing. The oxidation behavior of tungsten carbide hard metal in the temperature range between 600 and 900 ◦C was also researched. The oxidation mass gain of WC correlated almost directly with temperature as well as time. The particle of hard metal is surrounded by the α Cu+β Zn phase in the surface coating. The size of hard metal is almost unchanged from its original one. There exists an inter-diffusion zone at the interface of the hard metals and Cu-based matrix. The wear volume of the WC/Cu-Zn-Ni composite surface coatings increased...