Sharif Digital Repository

The airport terminal is difficult to plan and design due to the different components and the intricate complexity of its parts. At the airport terminal, we face a queue system which simulation is always a good way to analyze. In addition, computer simulation using modern softwares with the capability to model different types of systems, including the airport terminal, while being less realistic than analytical models, is less costly than operational Exercise.In this study, a supportive approach for better and specific management of Iranian airport terminal buildings with discrete-event simulation is proposed, considering the need for managing the airport terminals building in the country and... 

Limited water resources in Iran have made dams an important part of the country’s infrastructure. As a result of the large number of in-progress and expected dam projects in the country, consideration of sustainability factors during planning, construction and operation phases of dam projects can create significant economical, social and environmental impacts in the long term. To come up with an inclusive sustainable development, new sustainability assessment approaches seek for sustainable development at the entire project’s life-cycle; they are looking for sustainable development at all design, construction, operation, maintenance and even demolition phases. In this research we have... 

One of the major reasons causing cracks in external surfaces of concrete arch dams are thermal loads. Therofore, in order to avoid instabilities due to function of thermal loads in association with hydrostatic and hydrodynamic pressures, a precise evaluation of temperature distribution through dam body is indispensable. In this study, effects of thermal loads mostly on upstream surface of Karun-3 concrete arch dam in Iran were examined using a 3-D finite element method considering water level fluctuations. Also the influence of operatvie boundry conditions in our problem which are water temperature, air temperature and solar radiation was precisely taken into account. Moreover, nonlinear... 

The classical economic batch quantity (EBQ) model assumes that all produced items have a perfect quality. But in real-life production systems, generation of defective items is inevitable. A portion of these defective items is considered to be scrap , while the other is assumed to be reworkable and reworking them can reduce costs and increase productivity. In this thesis we have studied the economic batch quantity for a single stage production system with rework and scrapping . We want to satisfy the customer demand and minimize total costs of the system like set up costs , production costs , rework costs , holding costs , shortage costs and scrapping costs . In the first chapter of this... 

The behavior of pile foundations under earthquake loading is an important issue that affects the performance of structures. Design procedures have been developed for evaluating pile behavior under earthquake loading; however, the application of these procedures to cases involving liquefiable ground is uncertain. The performance of piles in liquefied soil layers is much more complex than that of non-liquefying soil layers because not only the superstructure and the surrounding soil exert different dynamic loads on pile, but also the stiffness and shear strength of surrounding soil diminishes over time due to both non-linear behavior of soil and pore water pressure generation. In this... 

In this thesis, based on the taking-off and landing of aircraft with GE 21-J85 turbine, the low cycle fatigue (LCF) test for superalloy used in first stage blades is considered. The LCF tests were performed on both coated and uncoated Rene 80 which are used in GE 21-J85 turbine at R = (min/max) = 0, strain rate of 2 10-3 s-1 and 760oC, 871oC and 982oC. To produce specimens, an investment casting method was used so that adequate amount of polycrystalline round bars could be obtained. The specimens were all homogenized and solution treated. After the inspection, some specimens were coated with pack cementation method in CODEP-B powder in H2 atmosphere. The coated and uncoated specimens all... 

In this thesis, two-level optimal control of uncertain and non-uncertain large-scale systems is presented. In the proposed two-level approach, using a decomposition/coordination framework, the large-scale system is first decomposed into several interactive subsystems, at the first-level, where a smaller optimization problem is solved at each subsystem. At the second-level, a substitution type prediction method, as a coordination strategy, is used to predict the interaction between subsystems. The coordinator mainly evaluates the next update for the coordination parameters and continues to exchange information with the first-level, so that the overall optimum solution is obtained. It is shown... 

In this study a layer with compressive residual stress was created by severe shot peening and hence surface grains was changed to nanostructure. Fatigue life will be increased as a result of compressive residual stress. Surface roughness increase, is one of the disadvantages of severe shot-peening process. Re-shot-peening with the smaller shots and lower intensity is proposed for reducing surface roughness. Numerical simulation as a powerful method, used to investigate the effects of shot-peening parameters on the residual stress distribution, surface roughness and grain size. Obtained results indicate that more energy in process can improve residual stress distribution and grain size unlike... 

A special steel beam-to-column connection, named Khor-jini, is commonly used for steel framing system in Iran. In this system, two continuous beams are passed next to the columns and are connected to the column side using seated brackets.This type of connection has been common in Iran from the late past. Unfortunately, the seismic behavior of Khorjini frames had not been sufficiently studied prior to Manjil Earthquake of 1990. Due to very large damages which occurred in steel structures especially in connections during the said earthquake, the seismic behavior of this type of connection was studied and some of its weak points were recognized.In this study non-linear... 

Due to the growing need for plasmonic wavs in microwave and terahertz spectra, a periodic arrangement of one-dimensional cut-through slits is investigated and an equivalent model based on the effective medium theory is derived. In contrast to the all previous attempts that were successful in mimicking only the zeroth-order diffracted waves, the proposed effective medium is capable of mimicking all diffraction orders. The parameters of the equivalent model are established by comparing the scattered waves of the semi-homogeneous medium and those of the main structure obtained by invoking the rigorous mode matching approach based on the single mode approximation inside the slits. This medium is... 

In the present study, the shock-disturbances interaction in hypersonic inviscid flows considering real gas effects is numerically studied by using a high-order WENO scheme. To account for real gas effects, the equilibrium air model is utilized. The strong conservative form of the two-dimensional unsteady Euler equations in the generalized curvilinear coordinates is considered as the governing equations and a shock-capturing technique is applied. The resulting system of equations is discretized by using the fifth-order WENO finite-difference scheme in space and the explicit third-order TVD Runge-Kutta scheme in time to provide a high-order accurate flow solver. The WENO scheme is a stable scheme...