Loading...
Search for:
rahmani--iraj
0.098 seconds
Total 188 records
An Investigation on the Effects of Liquefaction Induced Lateral Spreading on Deep Foundations and Development of Mitigation Measures Using 1g Shake Table Tests
, Ph.D. Dissertation Sharif University of Technology ; Haeri, Mohsen (Supervisor) ; Rahmani, Iraj (Co-Advisor)
Abstract
Liquefaction induced lateral spreading is defined as the lateral displacement of mildly sloping grounds or those ending in free faces as a result of liquefaction in subsurface soil layers. Damages imposed by lateral spreading on pile foundations supporting different types of structures such as ports, bridges and buildings are usually observed in large earthquakes. These potential damages are of high degree of importance in southern and northern coastal areas of Iran where several ports and critical facilities are located. River banks all over the country where bridge piers exist are also among the areas prone to potential damages. Evaluation of the effects of lateral spreading on existing...
Extraction of Crude Oil Component by Supercritical Fluid
, M.Sc. Thesis Sharif University of Technology ; Goudarznia, Iraj (Supervisor)
Abstract
Increasing of industrial society's need to refinery's product, high consuming energy in distillation process and pollution product in it cause to researchers investigate about the alternative process for crude oil refinery. At this time, supercritical fluid extraction was regard as a less energy consuming process. The aim of this work was prepare to a computerized model for simulating of crude oil refinery's process. In this work effects of temperature and pressure on the supercritical extraction were investigated. The experiment was done at four temperatures (35, 40, 45, 50°C) and four pressures (100, 120, 140, 160 bar) by supercritical carbon dioxide and obtained samples were analyzed by...
Thermodynamic and Kinetic Study for Production of Micro and Nano Poly(Ethylene Terephthalate) Particles With Supercritical System
, M.Sc. Thesis Sharif University of Technology ; Goodarznia, Iraj (Supervisor)
Abstract
It is well known that poly(ethylene terephthalate) (PET) is a high melting compound which has exceptional value as a fiber and film-making material, and which currently dominates the whole field of linear polyester substances. However, the high viscosity and limited solubility in liquid solvents restrict its processing to powders and hence the range of applications of such a polymer. Traditionally, crushing, mechanical grinding, ball milling and precipitation from solution are methods for producing powders. The first three ones inevitably change the property of materials. The last one is carried out on the basis of the application of an anti-solvent to decrease the solubility of a...
Used Oil Recovery by Supercritical Solvent Extraction
, M.Sc. Thesis Sharif University of Technology ; Goodarznia, Iraj (Supervisor)
Abstract
The supercritical carbon dioxide is applied in many separation processes as solvent. Due to this applicability of carbon dioxide, in this study, it is applied to oil refinery. In order to find the maximum efficiency, the experiment was conducted in the pressure range of 150-210 bar, and the temperature range 35-65 C of temperature. Based on this study, the changes in pressure show strong effect on the efficiency, and when it increases the efficiency increases, too. Despite of the pressure, when the temperature increases at a constant pressure, the density of supercritical carbon dioxide decreases. As a result, its solubility in decreases and the oil viscosity and mass transfer rate from oil...
To Make the Membrane for Drug Retard Release by Supercritical System
, M.Sc. Thesis Sharif University of Technology ; Goodarznia, Iraj (Supervisor)
Abstract
In this study the main goal is to prepare a membrane to perform delayed drug release and absorbtion in the human body. To do so the supercritical method was used. A well-known biodegradable polymer was used. These kinds of polymers are used in drug delivery, wound dressing or scaffolding for cell culture. A membrane produced out of these kin of polymers is expected to have a good accordance with the goals.Ploy Vinyl alcohol, having very good bio degradable characteristics was used as the main polymer and Poly Ethylene Glycol (PEG) was used as an additive to make changes in the membrane structure. Also Dimethyl Sulfoxide, a polar solvent having the capability of solving both polymers is used....
Investigation of Stress-Dependence on Hydro-Mechanical Properties of Fractured Rocks
, M.Sc. Thesis Sharif University of Technology ; Goodarznia, Iraj (Supervisor)
Abstract
Fracture and Matrix permeability systematically change because production time of gas and oil reservoirs is very long and pore pressure, temperature and in-situ stresses continously change in reservoirs.This parameters have an important role in determination and development of wells according to the permeability distribution.The main factors in determination of fracture permeability values is normal and shear stiffness that parameters such as roughness, opening, closure, aperture and asperities influence this factor.In this thesis, we try to investigate the influence of this parameters on fracture permeability according to the normal and shear stresses.Also we want to investigate the...
Wellbore Stability Analysis in Multiple Wells
, M.Sc. Thesis Sharif University of Technology ; Goodarznia, Iraj (Supervisor)
Abstract
In an oil field, there always have been several wells which are produced or injected for several years, parameters such as pore pressure, temperature and stresses have been altered due to these production and injection wells. Having knowledge about the changes in mentioned parameters, new wellbores will confronts instability during drilling in high depth and sensitive layers. This thesis deals with the wellbore instability of sandstone formation with special focus on the effects of stresses and pore pressure changes caused by production and/or injection wells in the vicinity of the area that the new well would be drilled, to begin with the general assumptions and input parameters used in the...
Stresses at the Bottom of a Borehole and its Effect on Wellbore Stability
, M.Sc. Thesis Sharif University of Technology ; Goodarznia, Iraj (Supervisor)
Abstract
Instability means that when wellbore is out of circle due to any reasons in which it may be associate with fracture or falling of wellbore wall. Wellbore instability problem in production and exploration wells cause high costs over than 100 million dollars in all over the world in which these costs can be increased to 1 billion dollars so, necessary forecasts for preventing of instability is essential. Up to now, a lot of methods are suggested for investigation of wellbore instability, but in this study, analytical investigation with the help of triaxial tension is considered. Failure criterion and rock behavioral model are two important factors in wellbore stability modeling. In this study,...
Acidizing Operation Design for Oil Fields by Use of Neural Network Method
, M.Sc. Thesis Sharif University of Technology ; Goodarznia, Iraj (Supervisor)
Abstract
The acidizing operations have significant impact on productivity and production of oil and gas wells, so that wells having shell or regional damage are good candidates for well stimulation operations which could result in significant increase for efficiency or injectivity. Generally, the neural networks are nonlinear learning mathematical systems. In this project consists, At first, wellhead data of acidizing operation are collected in two Gachsaran oil field (38 wells) and Nar and Kangan gas field (35 wells). Generally, the neural networks are nonlinear learning mathematical systems. In the neural Network by using two algorithms, back propagation algorithm and Quick Propagation algorithm...
The Effect of Different Stresses in the Three Principal Directions on a Formation with 30 Degree Fractured
, M.Sc. Thesis Sharif University of Technology ; Goodarznia, Iraj (Supervisor)
Abstract
In this study we investigated the stress effects on the fractured block in formation and its impact on flow through the matrix. At first the effect of various stresses on reduction of sample's pore volume and thereby reduction the permeability have been studied. The equations used to describe the elasticity relations in saturated matrix block is provided by Bayot theory. In this theory, the system of related equations to stress and strain changes have been developed in matrix. We have used finite element method in COMSOL software to solve the equation system created by elasticity relations in formation. After solving the equations, volume and volumetric strain changes which are caused by the...
Extraction of Anthocyanins and Total Phenolics from Dried Red Grape Skin by Super Heated Solvent and Production of NanoPparticle by Super Critical Fluid
, M.Sc. Thesis Sharif University of Technology ; Goodarznia, Iraj (Supervisor)
Abstract
Red grape skin has a lot of antioxidant that called Anthocyanins. In this research this material has been studied and amount of extraction of them have been studied by changing the operational parameter and particle size in taguchi procedure. Pressurized liquid extraction (PLE) was used to extract Anthocyanins from Dried Red Grape Skin (DRGS) with acidified Ethanol solvent (1 %( v/v) of HCl) in 90-120°C, 10-40 bar, and 30 min extraction time. In this study, effect of particle size distribution of DRGS was considered and the results showed that with increasing the temperature (from 90 to 120 °C in 10 °C increments) and decreasing the pressure and particle size the extraction of Anthocyanins...
Optimization of Supercritical Carbon Dioxide Extraction of Medicinal Plants Essence by using Taguchi Method
, M.Sc. Thesis Sharif University of Technology ; Goodarznia, Iraj (Supervisor)
Abstract
In this project after literature survey, an endemic Iranian plant called Dracocephalum kotschyi Boiss. that have various medicinal properties has been selected. The essential oil of this plant has not extracted by supercritical fluid technology up to now and this is first work. In order to achieve the maximum yield and optimization of process five parameter in four level has been selected including: Pressure, Temperature, Carbon dioxide flow rate, particle size and dynamic time. For reduction of the number of experiment, Taguchi design of experiment (DOE) and its L16 orthogonal array has been used. Total yield of extraction in each experiment calculated by dividing the mass of produced...
AI planning search time and space reduction technique for the problem of web service composition
, Article 2008 AAAI Workshop, Chicago, IL, 13 July 2008 through 14 July 2008 ; Volume WS-08-10 , 2008 , Pages 173-174 ; Sharif University of Technology
2008
Abstract
One of challenging problems in the domain of web services is the web service composition (i.e the task of composing web services to create new services, capable of fulfilling a need that no single service can satisfy). In real application, there will be a lot of relevant web services for a simple goal, so the search space for such a problem is huge. In this research statement, we show how by extracting some prior knowledge and using simple heuristics, search space and search time can be reduced significantly
Supercritical Carbon Dioxide Extraction of Catechins from Green Tea Leaves
, M.Sc. Thesis Sharif University of Technology ; Goodarznia, Iraj (Supervisor)
Abstract
Green tea has been receiving significant attention in recent years due to its high content of catechins; Epicatechin (EC), epicatechin gallate (ECG), epigallocatechin (EGC) and especially epigallocatechin gallate (EGCG). As powerful antioxidants, these compounds are believed to have several health benefits. In this study, we used supercritical CO2 with ethanol as co-solvent to extract catechin derivatives from green tea and we investigated the effects of experiment parameters on the extraction. Experiments, designed according to Taguchi algorithm, were conducted with green tea particles of four average diameters of 1500, 855, 605 and 427.5 µm, in an interval of 35- 55 ̊C for temperature and...
The Effect of Different Stresses in the Three Principal Directions on Horizontal Fractured Formation
, M.Sc. Thesis Sharif University of Technology ; Goodarznia, Iraj (Supervisor)
Abstract
Nowadays, we know that many hydrocarbon reservoirs are fractured regarding this, the investigation of the properties of these reservoirs is necessary to predict the storage, production and the drilling methods. To identify fractured reservoirs, the fracture properties and their geometries under different conditions should be investigated. Besides, the evaluation of the behavior of induced fractures in distinct under ground conditions is very important. The Mechanical properties of the drilling bed like crack propagation, layer and mass rock is impactful in planning of drilling process and hydraulic fracturing operation. In this research, at first we introduce natural and induced fractures...
Experimental Performance Analysis of Different Drill-in Fluids in Order to Reduce Formation Damage in Reservoir Sections
, M.Sc. Thesis Sharif University of Technology ; Goodarznia, Iraj (Supervisor)
Abstract
Formation damage is defined as any process that reduses the reservoir permeability relative to its normal state. Two major causes of this problem are filtrate and solid invasion into the pore spaces of reservoir rock.Therefore, the drilling fluid used for drilling the reservoir sections should prevent such a problem as much as possible.The goal of this study is to optimize the weighting additive particle size distribution to prevent permeability damage in one of the southern Iranian oil fields. By analizing the capillary pressure data of core samples, it seems that fracture presence in rock matrix leads to poor quality of mudcake, resulting peremabilty reduction in near wellbore region....
Thermal Behavior of Concrete Arch Dams Including Water Level Fluctuations
, M.Sc. Thesis Sharif University of Technology ; Ghaemian, Mohsen (Supervisor)
Abstract
One of the major reasons causing cracks in external surfaces of concrete arch dams are thermal loads. Therofore, in order to avoid instabilities due to function of thermal loads in association with hydrostatic and hydrodynamic pressures, a precise evaluation of temperature distribution through dam body is indispensable. In this study, effects of thermal loads mostly on upstream surface of Karun-3 concrete arch dam in Iran were examined using a 3-D finite element method considering water level fluctuations. Also the influence of operatvie boundry conditions in our problem which are water temperature, air temperature and solar radiation was precisely taken into account. Moreover, nonlinear...
Economic Batch Quantity (EBQ) for a Single-Stage Production System with Rework and Scrapping
, M.Sc. Thesis Sharif University of Technology ; Haji, Rasoul (Supervisor)
Abstract
The classical economic batch quantity (EBQ) model assumes that all produced items have a perfect quality. But in real-life production systems, generation of defective items is inevitable. A portion of these defective items is considered to be scrap , while the other is assumed to be reworkable and reworking them can reduce costs and increase productivity. In this thesis we have studied the economic batch quantity for a single stage production system with rework and scrapping . We want to satisfy the customer demand and minimize total costs of the system like set up costs , production costs , rework costs , holding costs , shortage costs and scrapping costs . In the first chapter of this...
Dynamic Analysis of Pile Foundations Embedded in Liquefiable Soils
, M.Sc. Thesis Sharif University of Technology ; Pak, Ali (Supervisor)
Abstract
The behavior of pile foundations under earthquake loading is an important issue that affects the performance of structures. Design procedures have been developed for evaluating pile behavior under earthquake loading; however, the application of these procedures to cases involving liquefiable ground is uncertain. The performance of piles in liquefied soil layers is much more complex than that of non-liquefying soil layers because not only the superstructure and the surrounding soil exert different dynamic loads on pile, but also the stiffness and shear strength of surrounding soil diminishes over time due to both non-linear behavior of soil and pore water pressure generation. In this...
Research on Influences of Coating on Low Cycle Fatigue Properties of Ni-Base Superalloy René 80
, Ph.D. Dissertation Sharif University of Technology ; Nategh, Saeed (Supervisor)
Abstract
In this thesis, based on the taking-off and landing of aircraft with GE 21-J85 turbine, the low cycle fatigue (LCF) test for superalloy used in first stage blades is considered. The LCF tests were performed on both coated and uncoated Rene 80 which are used in GE 21-J85 turbine at R = (min/max) = 0, strain rate of 2 10-3 s-1 and 760oC, 871oC and 982oC. To produce specimens, an investment casting method was used so that adequate amount of polycrystalline round bars could be obtained. The specimens were all homogenized and solution treated. After the inspection, some specimens were coated with pack cementation method in CODEP-B powder in H2 atmosphere. The coated and uncoated specimens all...