Sharif Digital Repository

Resonance acoustic spectroscopy (RAS) is one of the techniques used for monitoring the production quality and evaluation of mechanical properties of cylindrical components, due to their non-destructivity, high precision and quickness.
In this technique, the resonance effects are caused by the excitation of eigenvibrations of structure by an incident acoustic wave located in far-field. The resonance spectroscopy (isolation and identification of the resonance features) is performed on the far-field scattered pressure field which contains valuable information about the characteristics of the target. Appropriate exploitation of these resonance informations from the theoretical model and... 

Titania is one of the photocatalytic materials , but low quantum yield and relatively high band gap of TiO2 limited its applications.There are several ways to improve the photocatalytic properties of this material relied on narrowing the band gap,by doping TiO2 with other metals and oxides or increasing its specific surface area.In this work ,TiO2-SiO2-Ni coating have been made by sol-gel process and deposited on quartz substrate by using of dip-coating method .Effect of increasing Nickel content in nanocomposite and primary sol on crystalline structure,morphol ogy, photocatalytic properties and specific surface area have been investigated by means of X-Ray diffraction method, FT-IR, SEM,... 

Airline scheduling is a dynamic process in nature such that it changes not only during one year period but also in smaller intervals due to the economic, political, religious, and social factors. Basically, airlines schedule planners through using mathematical models decide which flights are to be served in what periods of time and at what costs. This has to be done considering a set of constraints of different nature, from airspace and airport congestion up to climatic conditions or even crews working conditions. Such a complex problem requires different methods for an efficient solution. In this study by using network optimization method and applying different operational constraints on... 

Liquid jet behavior in an intense electric field is studied experimentally and numerically.Imaging is used in experiments to charactrize jet behavior. Electrospray of ethanol using a simple needle in a wide range of operating conditions is investigated. Liquid meniscus is captured using a high-speed camera and different electrospray modes are described based on involved forces. A new nozzle is invented that broadens the stability margins of the useful cone-jet mode. The physical mechanisms of the new cone-jet is discussed and it is characterized using appropriate dimensionless parameters. A simple jet in presence of a gaseous crossflow and a normal electric field is also studied. The liquid... 

Increasing global final energy demand and the use of fossil fuels to meet this amount of energy demand have raised concerns about environmental impacts of fossil fuel consumption and the reduction of fossil energy reserves. Among the energy consumer sectors including industry, transport activities, agriculture, and households, the household sector is one of the most important sectors, regarding its share of total final energy consumption. Heating and cooling systems, which mainly use fossil fuels, are the biggest energy consumers in the household sector. Hence, optimal management of the heating and cooling systems can play an effective role in reducing energy costs in buildings. In this... 

In recent decades, employing composite has growing field in various industries due to distinct features like high specific stiffness and strength. Functionally graded materials are clasified as inhomogeneous composite materials. Nowadays many researchers are investigating the behaviors of plates, shells and beam liked structures made of FGMs. In this project the dynamic behaviors of a FGM simply supported beam under a moving oscillator are studied. The beam properties are assumed to be varied through the thickness following a simple power law distribution. The system of equations of motion is derived by using Hamilton’s principle under the assumptions of the Euler–Bernoulli beam theory.... 

Shoreline monitoring and predicting has a very important role for policymakers and managers of coastal areas in future planning and achieving sustainable development. In this regard, to monitor the shorelines and predict its changes, a study has been conducted considering the effect of tides. In this study, the shoreline obtained from satellite images has been modified by using slope maps, slope direction and tidal data. Then these lines were monitored using the Digital Shoreline Analysis System (DSAS) and finally Bruun's rule along with the RCP scenario was used to predict changes in the shoreline. In this research, the coastlines of Bushehr Province in the Persian Gulf have been selected... 

Accurate modeling of clutter and detection of low observable targets within clutter are the major problems in radar signal processing applications. Recently, fractal geometry is applied to the analysis of high range resolution radar sea clutters. The intrinsic difference in the fractal dimension between sea clutter and the echoes from targets is extracted and used to detect targets. The box-counting method is widely used to estimate fractal dimension but it has some drawbacks never or rarely considered in literature. We explain the drawbacks and propose a new fractal dimension based detector to increase detection performance in comparison with traditional detectors. Both statistically... 

The synthetic aperture radar (SAR) is a microwave imaging radar that achieves high resolution while taking advantage of pulse compression technology and the Doppler effect. In typical radar systems, in order to obtain a good azimuth resolution, one should use an antenna with big aperture. However this is not possible in many cases. SAR has overcome this problem by moving the antenna and so making a synthetic aperture. In inverse SAR (ISAR) the radar antenna is static and synthetic aperture is created by the movement of target. Typical SAR imaging aims at the static targets and when the target is moving, it does not operate well. When detecting moving targets by SAR, both radar and target are... 

Shallow geothermal energy is a renewable and sustainable form of energy that has the potential to help alleviate the growing climate and energy crisis. The most common system used to extract shallow geothermal energy is the ground source heat pump (GSHP) system. The concept of using underground structures in exploiting shallow geothermal energy for space heating and cooling has received increasing attention. This study focuses on the use of geothermal tunnels as a means of extracting shallow geothermal energy.This research examines the effects of different heat transfer mechanisms, and highlights the effects of this phenomenon by focusing on the effects of natural convection around the... 

This study aims to propose a new correlation between in-situ horizontal stress and cone tip resistance in soils. Knowing the field in-situ stress state condition has an important role in stability assessment and stress-deformation analysis in a common geotechnical system. Although vertical stress could be measured easily, horizontal stress is still known as challenging work. Due to the difficulty in sampling undisturbed sand specimens, in-situ tests have been proposed in the previous literature to investigate the different characteristics of this soil. Cone Penetration Test (CPT) is one of the most used and accepted soil methods for soil investigation, identifying different soil parameters... 

This thesis presents turbulent partially premixed combustion modeling behind a bluff-body by using the Flamelet Generated Manifold. The objective of the present work is to develop a 4D FGM program to simulate partially premixed combustion at a reasonable computational cost. Pre-tabulated data of this manifold is obtained by using a correlated joint PDF. An in-house code is developed to build a pre-tabulated library in conjunction with a correlated PDF. Also, an exclusive OpenFOAM solver is created by employing the PIMPLE algorithm. This solver provides the link of the computational domain with the pre-tabulated chemistry. This program is used to simulate Cambridge-Sandia stratified burner... 

While Cloud providers face problems during providing services to their clients, such as lack of resources or increasing idle resources in low workload; they can share their resources with other providers by participating in Cloud Federations, and take advantage of Cloud Computing benefits like high scalability and resource extension. Moreover collaborating Cloud Federations expands Geographical area of providers. The Resource Allocation Problem has been considered in many researches, but in fields like Cloud environment and Federated Clouds it comes with complications. This thesis analyzes an optimized mechanism based on game theoretic approach for Resource Allocation Problem in Federated... 

Token offerings, one of the new methods of financing in the blockchain industry, have provided startups with significant opportunities. In previous studies, most of the factors that determine the success of an initial offering have been examined, and operational performance has been less studied. In this study, the relationship between environmental, social, and corporate governance activities on operational performance and adoption has been presented. Previous studies have shown that more attention to environmental, social, and corporate issues leads to a higher amount of capital raised in the offering. We also address these issues among crowdfunding platforms, which attract more... 

In recent years, with the growth of industrial societies, the amount of energy consumption in the world has been increasing. On the other hand, the most consumed energy sources in the world are non-renewable energy sources. For this reason, governments and industries have invested to facilitate and make renewable energy sources cheaper. One of these renewable energies is geothermal energy, which is one of the most economical ways to use this energy, using heat exchange systems in piles and foundations. Using a heat exchange fluid, energy piles transfer the heat of the earth's surface to the ground with a lower temperature in the hot seasons of the year and use the thermal energy of the... 

In this study solid lubricants MoS2 nanoparticles with average size 50 nm and hard ZrO2 nanoparticles with average size 51 nm were used in watts bath and Ni/ZrO2-MoS2 composite coatings were prepared by pulse plating technique. Effect of current density, frequency, duty cycle, surfactant type and concentration of particles in the electrolyte on the amount of particles in the coatings were investigated and optimum conditions were determined to create composite coatings. Scanning Electron Microscopy (SEM) and x-ray diffraction (XRD) analysis were performed to study the morphology, structure, chemical composition of coatings. Corrosion testing of coatings by potentiodynamic polarization in... 

Groundwater is the primary source of freshwater in many coastal areas and small islands around the world. The most important hazard to groundwater quality in coastal aquifers is seawater intrusion (SWI) resulting from over pumping, prolonged drought conditions and sea level rise due to climate change impacts. Numerical models of SWI are an important tool in the management of coastal aquifers. However, numerical modeling of SWI is one of the most challenging problems in groundwater hydrology. One of the reasons for the challenging nature of SWI numerical modeling is the relatively large level of uncertainty associated with the estimation of the model input parameters. This study focused on... 

Sensitive ecosystem and scarcity of freshwater are the main characteristics of small islands. These islands have small catchments and usually lack tangible surface water resources. As a result these islands are dependent almost entirely on groundwater. Groundwater on small islands usually occurs in the form of a freshwater lens floating on the more dense saline water. The freshwater lens is highly sensitive to various stresses such as drought, pumping, sea tide, etc. Due to the importance of freshwater lens in islands, proper and optimal use of this vital resource should be studied. Kish island`s freshwater lens was three dimensionally simulated using the numerical model SUTRA. The aim was... 

In this thesis, the problem of building energy prediction modeling is investigated using system identification method. Since system identification method has lower error and high accuracy than other methods of building energy prediction. This method was used to model the energy prediction of the building of the Faculty of Energy Engineering.In this method, the different thermal areas of the building are divided into two groups: central and surrounding areas for modeling purposes. The sunscreens are not used in the model but are added to other system inputs in the thermal areas around these two inlets.Given that it is difficult to obtain planning for the presence of persons and the use of... 

In this thesis, we investigate some problems in Sublinear field. We designed an algorithm that approximate the minimum distance of a shape to be a disk. In the first algorithm, we assumed that its input is a matrix and 1s in the matrix represent black pixels and 0s in the matrix represent white pixels. Also, we designed another algorithm that its input is a data structure contains the positions of a convex shape and we can sample uniformly from its pixels. In this problem similar to the first problem we must approximate the minimum distance of a shape to be a disk. Finally, we designed an algorithm for counting disks in a matrix. The input is a matrix that it contains some disks which have...