Sharif Digital Repository

The method of wave function expansion is adopted to study the three dimensional scattering of a time-harmonic plane progressive sound field obliquely incident upon a multi-layered hollow cylinder with interlaminar bonding imperfection. For the generality of solution, each layer is assumed to be cylindrically orthotropic. An approximate laminate model in the context of the modal state equations with variable coefficients along with the classical T-matrix solution technique is set up for each layer to solve for the unknown modal scattering and transmission coefficients. A linear spring model is used to describe the interlaminar adhesive bonding whose effects are incorporated into the global... 

Porous scaffolds composed of gelatin/poly (vinyl alcohol), (Gel/PVA), were prepared using combination of freeze gelation and freeze drying methods. The effect of polymer concentration, gelatin/PVA ratio, and glutaraldehyde/gelatin ratio (GA/Gel) was investigated on morphology of pores, swelling ratio, biodegradation, and skin cell culture. At optimum preparation conditions the scaffolds had uniform pore size distributions showing high swelling ratio of 23.6. The scaffolds were of biodegradable nature and almost degraded in 28 days. Human dermal fibroblast cells (HDF) were cultured on the scaffolds and MTS assay was conducted to evaluate the influence of PVA on growth and proliferation of the... 

Porous scaffolds composed of gelatin/poly (vinyl alcohol), (Gel/PVA), were prepared using combination of freeze gelation and freeze drying methods. The effect of polymer concentration, gelatin/PVA ratio, and glutaraldehyde/gelatin ratio (GA/Gel) was investigated on morphology of pores, swelling ratio, biodegradation, and skin cell culture. At optimum preparation conditions the scaffolds had uniform pore size distributions showing high swelling ratio of 23.6. The scaffolds were of biodegradable nature and almost degraded in 28 days. Human dermal fibroblast cells (HDF) were cultured on the scaffolds and MTS assay was conducted to evaluate the influence of PVA on growth and proliferation of the... 

This paper presents an approach for optimal operation of a grid-connected hybrid system to maximize the system expected generated energy while maximizing the electricity sale revenue. The hybrid system consists of a photovoltaic (PV) module, an electrolyser (EL), hydrogen storage tank (HS) and a proton exchange membrane (PEM) fuel cell (FC). The generated energy is sold to the distribution grid. During the grid interruptions, the hybrid system output is used as an emergency supply to serve the local load, hence increasing the supply reliability. The proposed approach splits the whole problem in two sub problems: revenue maximizing problem (RMP) and expected generation maximizing problem... 

An environmentally friendly and highly active mesoporous Co(ii) complex on mesoporous SBA-15 material could be used as an easily recoverable catalyst for the synthesis of α-aminonitriles from a wide range of aldehydes/ketones and primary or secondary amines with good to excellent conversions yields at room temperature under solventless conditions. The catalyst can be recovered by simple filtration and could be reused at least 10 times without loss of catalytic activity  

This paper describes the photoluminescence study of titanium dioxide (TiO2) nanorods grown by a hydrothermal synthesis method on the surface of fluorine doped tin oxide (FTO) coated glass. The effects of growth conditions including: reaction time, precursor concentration and adding NaCl to hydrothermal solution on the structural and optical properties of productions are examined by using SEM, XRD, TEM and room temperature photoluminescence measurements. Also, the performance of the TiO2 nanorods as a photoanode of dye sensitized solar cells is investigated. The different excitation energies and intensities are chosen to verify the discrete electronic state of radiative recombination centers... 

We have investigated an oxidation of substrate effect on structural morphology of zinc oxide (ZnO) rods. ZnO rods are grown on porous silicon (PS) and on thermally oxidized porous silicon substrates by carbothermal reduction of ZnO powder through chemical vapour transport and condensation. Porous silicon is fabricated by electrochemical etching of silicon in hydrofluoric acid solution. The effects of substrates on morphology and structure of ZnO nanostructures have been studied. The morphology of substrates is studied by atomic force microscopy in contact mode. The texture coefficient of each sample is calculated from X-ray diffraction data that demonstrate random orientation of ZnO rods on... 

ZnO tetrapods and rods were grown on silicon and thermally oxidized porous silicon substrates with and without Au catalyst layer by carbothermal reduction of ZnO powder through chemical vapor transport and condensation method (CVTC). Porous silicon was fabricated by electrochemical etching of silicon in HF solution. The effect of substrates on morphology, structure and photoluminescence spectra of ZnO nanostructures has been studied. The texture coefficient (TC) of each sample was calculated from XRD data that demonstrated random orientation of ZnO nanostructures on the oxidized porous silicon substrate. Moreover, TC indicates the effect of Au catalyst layer on formation of more highly... 

Here, the UV photodetection of ZnO rods grown on porous silicon substrates are reported. Laterally interconnected ZnO rods have been synthesized by chemical vapor transport and condensation method on porous silicon substrates. As characterized by current-voltage measurements the I-V characteristics have linear behavior, indicating space charge effect. The device exhibits photocurrent response of 0.027 A/W for 325 nm UV light under -5 V bias. The rise and decay time constants under these conditions are 19 and 62 s, respectively  

A uniformly distributed ZnO nanowire array has been grown on silicon (100) substrates by catalyst-free chemical vapor transport and condensation. The effect of growth conditions including source heating temperature, substrate temperature, and gas flow rate on growth properties of ZnO nanowire arrays are studied. Scanning electron microscopy, X-ray diffraction, and room temperature photoluminescence are employed to study the structural features and optical properties of the samples. The results show a correlation among experimental growth parameters. There is a zone for substrate temperature, by controlling gas flow rate, that uniformly distributed and well aligned ZnO nanowire arrays can be... 

A novel nanocomposite of ZnO-PbO with flower-like nanostructure was fabricated from zinc acetate and lead nitrate as principle raw materials via an in situ process. The novelty of this study consists in the use of a common approach for fabricating of ZnO and PbO nanoparticles simultaneously. From these experiments the conclusion might be drawn that Zn(NH4) 2 4+ ions and Pb(OH)2 act as precursors for the nucleation and growth of ZnO and PbO respectively under microwave irradiation. The precursors formation were carried at two stages: reaction between zinc ions and lead nitrate with ammonium ion and hydroxide sodium respectively. The average crystalline size of Zno and PbO has been analysed by... 

The cauliflower like ZnO nanostructures are grown on ZnO nanorods using spray pyrolysis method. First, ZnO nanorod arrays are grown on p-type silicon substrate without catalyst by chemical vapor transport and condensation method in a horizontal tube furnace. Afterwards, the cauliflower like ZnO nanostructures is deposited on top of the ZnO nanorod array. The PL spectra of cauliflower like ZnO nanostructures consist of UV emission bands around 387 nm and a visible emission at ∼440 nm. The current-voltage (I-V) measurement under dark and UV illumination condition are performed to study photodetection of the cauliflower like ZnO-ZnO nanorod/p-Si heterostructure. The experimental data of dark... 

Hydrogels made of natural polymers [chitosan (CS) and gelatin (G)] have been prepared having mechanical properties similar to those of muscle tissues. In this study, the effect of polymer concentration and scaffold stiffness on the behavior of seeded muscle-derived cells (MDCs) on the CS-G hydrogel sheets has been evaluated. Both variables were found to be important in cell viability. Viability was assessed by observation of the cell morphology after 1 day as well as a 14-day MTT assay. The CS-G hydrogels were characterized using Fourier transform infrared (FTIR) analysis, which revealed evidences of strong intermolecular interactions between CS and G. Hydrogel samples with intermediate... 

In this study chitosan hydrogel beads with porosity ∼ 0.86 and diameter ∼ 2 ± 0.07 mm were prepared from 85 % deacetylated chitosan for removal of Cd2+ ions from aqueous solutions. Chitosan powder was dissolved into dilute acetic acid as solvent and formed into spherical beads using a phase inversion technique. The effect of temperature, initial concentration of Cd2+ ions, and the period of agitation were perused to achieve the best isotherm model. Freundlich model was better fitted than Langmuir model (R2 > 0.99 and R2> 0.93 respectively, at pH of 6.3, and shaker speed of 200 rpm), the constants of Langmuir and Freundlich models were calculated, which RL value and qmax (mg/g wet weight) at... 

In nonlinear acoustic regime, a body insonified by a sound field is known to experience a steady force that is called the acoustic radiation force (RF). This force is a second-order quantity of the velocity potential function of the ambient medium. Exploiting the sufficiency of linear solution representation of potential function in RF formulation, and following the classical resonance scattering theorem (RST) which suggests the scattered field as a superposition of the resonant field and a background (non-resonant) component, we will show that the radiation force is a composition of three components: background part, resonant part and their interaction. Due to the nonlinearity effects, each... 

A body insonified by a constant (time-varying) intensity sound field is known to experience a steady (oscillatory) force that is called the steady-state (dynamic) acoustic radiation force. Using the classical resonance scattering theorem (RST) which suggests the scattered field as a superposition of a resonance field and a background (non-resonance) component, we show that the radiation force acting on a cylindrical shell may be synthesized as a composition of three components: background part, resonance part and their interaction. The background component reveals the pure geometrical reflection effects and illustrates a regular behavior with respect to frequency, while the others... 

Objective: The method of wave function expansion in association with the spatial Fourier transform technique is adopted to study the steady-state sound radiation characteristics of a cylindrical component of infinite length subjected to an arbitrary time-harmonic on-surface concentrated radial drive. Method: Presenting the acoustical radiated coefficient as an exact function of modal accelerance function of the shell and following the classical Resonance Scattering Theory (RST), postulate that the radiated field can be synthesized as a superposition of the resonance response of the shell and a background signal within each partial wave. Utilizing the inherent background approach, we... 

An exact analysis based on the wave function expansion is carried out to study the scattering of a plane harmonic acoustic wave incident at an arbitrary angle upon an arbitrarily thick helically filament-wound (anisotropic) cylindrical shell submerged in and filled with compressible ideal fluids. Using the laminated approximation method, a modal state equation with variable coefficients is set up in terms of appropriate displacement and stress functions and their cylindrical harmonics to present an analytical solution based on the three-dimensional exact equations of anisotropic elasticity. Taylor's expansion theorem is then employed to obtain the solution to the modal state equation,... 

A novel combination between N-hydroxy phthalimide (NHPI) and a silica based cobalt (II) interphase catalyst (1) efficiently catalyzes the aerobic oxidation of various types of alcohols to the corresponding carbonyl compounds. The catalyst 1 shows high thermal stability and also could be recovered and reused in combination with NHPI for at least five reaction cycles without considerable loss of reactivity. © 2005 Elsevier B.V. All rights reserved