Sharif Digital Repository

Blending can be used as one of the ways of producing materials with appropriate properties, which have many relative advantages in comparison with other methods like polymerization. Among the existing blends in the market and scientific areas, blends of polyurethane thermoplastic and polypropylene have been also studied because of its commercial importance and scientific interest. This blending can improve the mechanical properties, friction resistance, improvement of impact strength at low temperatures and improvement of plasticity properties. In this research, blends with different ratios of TPU/PP is produced by melt mixing, and for improving properties of blends, two kinds of nano fumed ... 

The main object of this thesis is preparation and investigation of polyolophine/graphene oxide nanocomposites by using bi-supported Ziegler-Natta catalytic system and in-situ polymerization. Magnesium ethoxide and graphene oxide were used as supports of catalyst. TiCl4 was accompanied by triisobutyl aluminum (tibia) and diisobutyl phthalate (DIBP) as an electron donor constituting Ziegler-Natta catalytic system. Preparation of catalyst and polymerization were taken place in slurry phase under the argon atmosphere. At the beginning of the polymerization experiment, several type of nanocomposites were made under various conditions (such as different Al/Ti molar ratio) to find optimum condition... 

The nervous system is the most complex body system and controls other body systems. Damages of the peripheral nervous system will interfere with the functioning of the body. Tissue engineering is used as one of the most effective methods for repairing damaged tissues,by providing 3-dimensional (scaffold) bedding with proper properties, allows the proliferation of Myelin sheath and proliferation of axons. In this study, we used a continuous extrusion process, sodium alginate with different percentages of Polyaniline-Graphene nanoparticle (synthesized by solvent emulsion) was extruded and its properties were determined by FTIR, SEM, MTT, tensile properties, Conductivity, contact angles and... 

Although polyacrylamides and theirs modified polymers have an extremely application in the industry mechanical weakness, such as viscosity in salinity or high temperature cause this polymer loss your functional application. In recent years, many endeavors due as modified this polymer by hydrophobics monomers were done but unfortunately don’t have a significant result. Modified acrylamide monomer and hydrophobic mini-emulsion were survey Most used polymers, such as hydrolyzed polyacrylamide, are not able to high levels of salinity and high temperature of the reservoirs. Dr. Ramazani and theirs group use innovational idea of hydrophilic monomers for overcome to this problem. In this project,... 

The present work focuses on the sustainable development of an intelligent self-healing anticorrosion coating using nanocontainers based on the aluminium oxide nanostructure-pomegranate peel extract-Ce3+ (Ce-PPE@Cat). The Ce-PPE@Cat nanopigment was introduced into the epoxy film (Ep) to achieve a smart barrier/ self-healing anti-corrosive property. To this end, a couple of characterization tests, including FT-IR, TGA, and, BET have been carried out to investigate the Ce-PPE@Cat nanopigment structure/composition. The effectiveness of the anti-corrosion performance of the established coatings was confirmed by EIS, FE-SEM, and accelerated salt spray test. Furthermore, EIS studies revealed that... 

In recent years, the use of polyurethane foams has been of interest for many researchers and craftsmen. Polyurethane foams, due to their excellent properties, can be used in important applications such as advanced military industries, insulation and those requiring strength and maneuverability. The aim of this research project is to produce polyurethane / sodium silicate or nano-silica nanocomposites. Prior to the fabrication and synthesis process of polyurethane containing sodium or nano-silica, deposited silica nanoparticles were synthesized using high-rubbed sodium silicate and sulfuric acid, followed by various tests including XRD, FE-SEM and BET to verify It was done. Sodium silicate... 

With the rapid increase of energy consumption, energy problem has been a global issue, which must be faced with and solved. One way to prevent energy consumption is to reduce drag in the flow inside the pipes by using polymer additives; Because the Transportation of liquids using pipeline technology has its limitations, since turbulent flow inside the pipe involves a loss of energy. The net effect of this is that increasing the energy applied to the flow does not increase the flow rate. For this purpose, copolymers and terpolymers of hydrophilic acrylamide monomers along with hydrophobic styrene and hydrophilic maleic anhydride monomers were synthesized by reverse emulsion polymerization... 

The use of polymers in the EOR process is very common. Most of these polymers are sensitivity to temperature, salt, and the presence of bacteria. Among these materials, hydrolyzed polyacrylamide (HPAM) is the most widely used. Due to the sensitivity of HPAM in harsh conditions like temperature and salinity of the environment, modification of this polymer by hydrophobic groups can be very effective. Hydrophobic-hydrophilic associative polymers have shown unique rheological properties and high thermal stability, which is due to the presence of a small percentage (up to two percent) of hydrophobic monomers in their structure. Despite these excellent properties for acrylamide copolymers... 

The main purpose of this study is simulation of in-situ release of nano-size coated polymer particles at the water-oil interface during the polymer flooding. Reaching at the flooding interface, the hydrophobic coating starts dissolving into the oil phase. Subsequently, the hydrophilic core polymer starts diffusing back and simultaneously solves into the water phase and increase the in-situ viscosity of the flooding interface. Because of the in-situ release of the polymer and consequently the viscosity reduction of the injected fluid, the driving force for injection of the polymer as well as the amount of polymer used in flooding will reduce. In addition, smart coating can decrease the... 

It is about half century passed from the invention and application of the polymer flooding. Although there are successful reports from the using polymer flooding, but there are problems that in some cases this process fails. For more insight on the problems and in order to improve
the efficiency of this process the conceptual understanding of the process is required. More conceptual understanding from this process, requires investigation in pore scale. In the presenting investigation, the flow of Newtonian and non-Newtonian fluids in the single phase and two phase form and in pore scale are simulated using finite volume method. Because, the finite volume method is used in very... 

Among the methods for increasing chemical oil extraction,the polymeric flood method has the most commercialization capability.However,most commonly used polymers such as Hydrolyzed Polyacrylamide (HPAM) are not able to withstand high levels of salinity and high temperatures.To overcome these problems,in this project,new types of polymer nanostructures were synthesized with hydrophobic groups consisting of styrene (hydrophilic monomer) and malic anhydride (hydrophilic monomer) acrylamide (hydrophilic monomer). These polymers were synthesized by reversible mini-emulsion by adjusting the synthesis conditions for the purpose of producing the terpolymer with suitable conditions for tolerating... 

In order to protect the corrosion of steel, a self-healing epoxy nanocomposite containing modified graphite carbon nitride (g-C3N4) and ZIF-67 was made along with benzotriazole (BTA) and cerium inhibitors. To increase the efficiency and also to increase the duration of use of inhibitors, it is better to load these inhibitors on containers such as MOFs. One of the useful MOFs for this purpose is ZIF-67, which has a high specific surface area that allows the transport of inhibitors with high capacity. But these containers fail after some time, so to improve the physical properties of the coating systems, g-C3N4 was also used as a mineral material, which of course was also used as a filler.... 

In this research UHMWPE/MWCNT nanocomposites with different concentrations of nanotubes (0.5, 1.5, 2.5, 3.5 wt %) were prepared via in situ polymerization using a novel Bi-supported Ziegler-Natta catalytic systems. Magnesium etoxide and Multi wall carbon nanotubes functionalized by hydroxyl groups were used as supports of catalyst. TiCl4 accompanied by triethylaluminum constituted Ziegler-Natta catalytic system. Preparation of catalyst and polymerization were done in slurry phase under the argon atmosphere. Support of catalyst on MWCNT was investigated using Fourier Transform Infrared Spectroscopy (FTIR). The results confirmed interaction between catalyst and hydroxyl groups on the surface... 

In this research UHMWPE/FUMED SILICA nanocomposites with different concentrations of nano fumed silica (0.5, 1.5, 2.5, 4.5 wt %) were prepared via in situ polymerization using a novel Bi-supported Ziegler-Natta catalytic systems. Magnesium etoxide and Fumed Silica functionalized by hydroxyl groups were used as supports of catalyst. TiCl4 accompanied by triethylaluminum constituted Ziegler-Natta catalytic system. Preparation of catalyst and polymerization were done in slurry phase under the argon atmosphere. Scanning Electron Microscopy (SEM) images also certified very good dispersion of fumed silica throughout PE matrix. Intrinsic viscosity measurements showed high molecular weight for... 

Despite of passing many years from invention of Computational Fluid Dynamics (CFD), simulation of the fluid-solid interfaces and free surfaces are still completely challenging and progressive problems. In addition knowing and understanding nanotechnology huge applications,modeling of nano-fluids have been became a priority for researchers. Adding importance of Non-Newtonian fluids (especially polymeric solutions) to this two subjects, triangle topics of this research becomes vivid. In this research tried to consider and examine behavior of Newtonian,Generalized-Newtonian, Viscoelastic and nano-filled viscoelastic fluids in one and two phase mediums. we followed mesh free methods which are... 

Repairing and regeneration of neural tissues have attracted considerable attention due to its direct effect on the quality of patients’ lives. Recent developments in nanotechnology and tissue engineering have facilitated their comprehensive applications in the treatment of neurological diseases, and several effective ways have been proposed to repair defects in neural tissues. The main objective of the researches in this field is to regulate cellular behavior and tissue progression through the design and development of synthetic extracellular matrices, such as novel biomaterials, that enhance cell culture and tissue regeneration. Natural polymers, such as chitosan and gelatin, are suitable... 

Among chemically enhanced oil recovery (CEOR) methods, polymer flooding has the highest commercial potential. However, the most widely used conventional polymers such as partially hydrolyzed polyacrylamide (HPAM) are not applicable for high-temperature and high-salinity reservoirs. To overcome above-mentioned problems, in this work, a series of water-soluble hydrophobically modified polymers (HMPs) nanostructures comprising 2-vinyl naphthalene (hydrophobic monomer) has been produced by freestyle method (without Surfactant), micellar (with Surfactant). The size of the particles was investigated using scanning electron microscopy (FE-SEM) and optical scattering (DLS). Results from FT-IR...