Sharif Digital Repository

An injector is one of the most important components of the two components chemical propulsion system used in satellite control. The design of an injector is a complicated and time-consuming process and is largely dependent on laboratory data. In this study, the spray characteristics obtained from a small scale swirl injector under different operating conditions have been experimentally measured in a laboratory environment, such as the injector discharge coefficient, spray cone angle, and the distribution of droplets in the field. To calculate the discharge coefficient, the flow rate of the injector has been measured for different operating pressures. The shooting method and image processing... 

One of usual criterion which detrimines how much two polynomials are close to each other is smallness of the norm of vector that is formed from subtraction of their corresponding coefficients. Using this criterion, in this dissertation we become involved in investigation of two similar problems. First one is determination of the closest non-Hurwitz polynomial to a Hurwitz one. During this activity, the robustness margin of Hurwitz polynomial whose coefficients are subject to uncertainty is determined. The second problem is determination of the closest Hurwitz polynomial to another polynomial which is not Hurwitz. Unlike to the first problem, this problem is extremely hard. The solution of... 

Nowadays, Online Social Networks (OSNs) play an important role in the exchange of information among people. Some previous studies indicate that diffusion behavior and network structure are tightly related. Community structure is one of the most important features of OSNs. Access to the whole network topology is the necessary and prevalent requirement for most of community detection methods, so the limited access to full or partial topology can decrease their accuracy. Using traceable information over diffusion network is a solution to surmount this difficulty. In this work, we are concerned with the community detection by only using the diffusion information, while unlike the previous... 

Semi-automated Continuous Speech system deals with collecting corpus speech. It has very different problems in various natural languages because of different types of speech, and collecting speech corpus containing continuous word is very time-and- cost consuming. To overcome this problem, human-based computing techniques are proposed to collect speech corpus. In this thesis, we describe influencing factors in collecting steps of continuous speech and provide a description of human-based techniques to solve problems specially collecting of continuous speech. To collect speech corpus using human-based techniques, a game has been used so that speech corpus of web users are collected during the... 

Simulation optimization has been one of the most important topics in recent years. It is especially useful when the objective function cannot be computed directly or some of the parameters are stochastic. Buffer allocation problem is one of the important problems related to production lines. In this problem the objective is to determine the buffers between workstations so that the throughput is maximized. Non-linear and combinatorial nature of the problem, stochastic factors like machine breakdown or processing times and most importantly lack of a distinct relation for the objective function are the reasons of using simulation ... 

Recent researches show inefficient use of frequency spectrum such that there is shortage of frequency in operation. In order to overcome this problem cognitive radio are introduced that opportunist usage of frequency band is their prominent characteristic. Problems and challenges caused by using these networks are wide and increasing. In this thesis we focus on improving resource management algorithms in cognitive radio. In this study in order to have a dynamic and efficient management in choosing reliable and quality channels, reinforcement learning algorithms are used based upon existing data and experiences. Since this tool has the learning capability and analysis in dynamic situation of... 

Reviewing trends of energy consumption in the world reveals that sooner or later energy resources will be depleted. This concerning rate of consumption has brought about more greenhouse gases (GHG) emission influencing deleteriously on environment and climate. Human has continued energy consumption to maintain and improve the quality of his life through industrial production. Industry as a significant energy user owns considerable contribution to this consumption. Several attempts have been carried out to develop energy management systems in order to improve the energy efficiency of industrial sectors. Whilst they are comprehensive and could be applied to any sector, there is lack of... 

The behavior of boundary layer under the effect of the sweep angle is considered. The measurements were performed by a pitot tube rake. Three models with various sweep angels at angles of attack -2, 0 and 2 degree were tested. Both tip and root of all wings were closed by flat plates in order to prevent the flow to roll-up. However the flow field on the wing was still three-dimensional because of the sweep angle. The velocity on the wing has two components; longitudinal and lateral. The cross flow emerges due to the non-equilibrium of pressure and centrifugal forces. The velocity profiles showed that the magnitude of cross flow was stronger near the leading edge of the wing. The cross flow... 

This research attempts to develop the optimal solution for an inventory problem consisting of a single machine which produces items some of which may be defective. We assume that no shortages are allowed and all defective items are to be reworked. Setup cost for rework and waiting time of defectives are considered. This research consists of two different parts. In the first part we consider two different policies where in the first policy in each cycle after the regular production the machine is setup for the rework of defectives of the same cycle. In the second policy several cycles constitute a period. All the defectives produced in the period are reworked in the last cycle of that period.... 

Energy harvesters are used in today’s Wireless Sensor Networks (WSNs) to harvest the energy from the environment. One of the important advantages of the energy harvesting sensor networks over battery-operated sensor networks is that the use of the energy harvester prolongs the life time of the nodes, while a battery-operated node becomes useless once its energy runs out. Although an energy harvester can provide a supply source with a lifetime much greater than a battery, the amount of available energy for an energy harvesting system is a random variable and is not as predictable as the energy of a battery. This unpredictability may cause reliability problems. In order to solve the existing... 

Wireless Sensor Networks have become widespread because of their flexibility, applicability and ability to precept data with high accuracy. However, the most limiting factor in their usage is the amount of available energy in nodes since energy depletion in a node means that it is dead, therefore many efforts have been done for optimum energy management in Wireless Sensor Networks. In many cases, the key solution to prolong the network lifetime is load balancing. In this way, all the nodes will die (approximately) together and the lifetime of network will be maximized. Load balancing can be implemented in all layers from physical layer to application. It should be noted that it is not always... 

The competitiveness of a port convinced shipping lines and shippers with a significant basis in selecting a port. Port authorities and port operators can make use of the competitive advantage as a parameter for counter measures by grasping the advantages and disadvantages of the ports and be a prime factor of opportunities and threats of the ports. Ports have a significant role in today’s networked business environment. They are being regarded as hubs that are part of various logistic systems. The very essence of a seaport is to link maritime networks and land network. These networks for the port are means of analyzing its competitiveness. A port overall competitiveness is determined by it’s... 

Concrete is the second most structural material in the world. So attention and promotion of the concrete mix design with respect to variable issues and requirements, is very important. On the other hand, these days environment and its pollution has become very popular discussion. Waste-glass which is produced by human products is one of the environmental pollutants. In this thesis it replaces some aggregate in concrete and it can reduce the level of this material in the world. Also we study effects of silica-fume as cement replacement and properties enhancer in our concrete mix design and see how it can ... 

In recent decades the use of FRP materials for strengthening structures has been developed extensively, thanks to their high strength, sufficient stiffness, high durablity, and ease of use. A great deal of research has been conducted on strengthening reinforced concrete beams and columns with FRP composites. By contrast, not many researches are performed on slabs, especially two-way slabs. In these few researches, the loading and boundary conditions are limited to simplest ones. Therefore, in this thesis, the focus of attention is on strengthening reinforced concrete slabs under various loads and boundary conditions using FRP composites.
In this thesis, first, FRP composites and their... 

Supplier selection is a strategic decision that has a key impact on the success of the supply chain. Due to the nature of goods and storage conditions in the cold supply chain has a great impact on environmental pollution compared to other chains, and it also has the possibility of disrupting the chain due to the importance of temperature and time conditions. Currently, due to the spread of international pressures on the observance of environmental and social principles, the issue of choosing a sustainable supplier has been raised. Also, the expansion of supply chains has caused the challenges and risks faced by supply chains to expand and disrupt the chain, so the decision of supply chain... 

Reinforced concrete (RC) shear walls with a curved cross-section are appealing structural elements to architects and engineers due to the aesthetic and structural advantages. Owing to the paucity of decent experimental research on curved RC shear walls (CRCSWs), the seismic response of these structural elements is essentially unknown. In that regard, this study includes research on a high-demanding type of structural element, which has found its application in North America, Europe, Asia, and to some extent in the Middle East with relatively no design specifications and laboratory research, structural analysis, and design methodology. Therefore, in order to provide an insight into the... 

Platelet nanoparticles could dramatically decrease permeability of polymeric film where increase considerably its physical -mechanical properties. Bio based (Biodegradable) polymeric materials such as starch based polymeric films show very weak mechanical and high oxygen and water vapor permeability. Graphene oxide (GO) could increase mechanical properties of starch based polymer where decrease its permeability dramatically. Addition of chitosan also could increase antibacterial and antifungal of films and decrease permeability of films considerably. In this research nanocomposite of Starch/Chitosan/GO films have been prepared by solution method and its morphology, permeability, physical... 

In the present work, the experiments were carried out for two types of PAM (3330 and 3630) with three distinct concentrations (25, 40 and 55 ppm) and TiO_2-water nanofluid for four concentrations (1.5, 2, 2.5 and 3 vol. %), and the Nusselt number and friction factor for each of them expressed separately. The Reynolds number was in the range from 11000 to 21000. The steady state turbulent convective heat transfer and friction factor of the combination of TiO_2-water nanofluid and polymer 3330 in the coiled tube were investigated. The effects of the Reynolds number for 2 vol. % nanoparticles which consists of 25 ppm PAM (3330) determined at the constant temperature of 24°C. It was observed... 

In this research we focus on study and fabrication of ZnO composite nanofibers by electrospinning method for photocatalytic application. The most important challenges in the field of photocatalyst are photocatalytic activity under the visible light and efficiency enhancement. ZnO is a wide band gap semiconductor and it is not active under the visible light. In Iran, we have more than 300 sunny days in a year. Therefore fabrication and application of photocatalytic material with activity under the sun light that contained 40% of visible light is so vital in our country. In the first part of this project, ZnO-CNT nanofibers were fabricated and carbon doped in the crystal lattice of the ZnO....