Sharif Digital Repository

Predicting the price that has the least error and can provide the best and highest accuracy has been one of the most challenging issues and one of the most critical concerns among capital market activists and researchers. Therefore, a model that can solve problems and provide results with high accuracy is one of the topics of interest among researchers. In this project, using time series prediction models such as ARIMA to estimate the price, variables, and indicators related to technical analysis show the behavior of traders involved in involving psychological factors for the model. By linking all of these variables to stepwise regression, we identify the best variables influencing the... 

With growth in using the Internet and entrance of online stores and internet banks to daily people life, security has become a vital part of this new world. This causes, industrial companies started to produce security devices such as fire walls for protecting network from outside attackers and Intrusion Detection/Prevention Systems (IPS/IDS) for detection of attacks inside network. IPS/IDS causes network overload due to requiring copy of packet or flow information. With introducing Software Defined Networking (SDN) architecture, there is a hope to solve the issue with combining IPS/IDS and SDN features. Therefore, we propose two novel approaches for fast network scanning and SYN Flood... 

The pursuit of a desirable life and the enhancement of citizens' life satisfaction has long been primary objectives of politicians and urban planners. While various definitions of life satisfaction have been proposed by scholars, it can be conceptualized as a comprehensive, long-term appraisal of one's quality of life, influenced by a range of factors pertaining to their living conditions. Given that mobility is an integral aspect of contemporary societies, transportation and travel mode are widely regarded as key determinants of life satisfaction. It is noteworthy that individual priorities in selecting travel modes are shaped by personal and social characteristics, which may not always... 

Natural gas (NG) has emerged as an alternative energy source in transportation sector as it provides clean combustion and hence lowers exhaust pollution. NG can be stored as an adsorbed phase in porous materials and is referred to ANG. The use of adsorbent materials for storing NG, at relatively low pressure (3.5–4 MPa), is a possibility for making ANG technology competitive with CNG. Among all adsorbents, carbon nanostructures with pore diameter (0.8-1.4 nm) has shown the highest adsorption capacity of natural gas. In the present study, cellulose has been used as the carbonaceous precursor and Activated Carbon (AC) has been prepared using hydrothermal carbonization of cellulose followed by... 

The conventional methods in concrete are usually divided to destructive and nondestructive tests. Among these, nondestructive tests are more preferable because they don’t damage the structure or at least the damage doesn’t significantly affect its performance. According to precision of estimation of concrete conditions, nondestructive tests have different levels. These tests on concrete bridge decks range from chain drag to more developed test like Ground Penetration Radar in concrete The optimum ease of use, cost and the precision of results of Ultrasonic Pulse Velocity (UPV) test compared with other nondestructive methods have made it a most widely used method. The precision of results of... 

Monolithic nanocatalysts for naphta hydrodesulfurization process have been prepared and evaluated. Commercial cordierite monolith was used as a ceramic substrate. Initially, the monoliths were pretreated with nitric acid solution in order to increase specific surface area. After that, carbon nanotubes were grown through catalytic decomposition of methane over prepared monoliths. Finally, the CNT-coated monoliths were oxidized with ozone and an aqueous solution of H2O2. For the preparation of HDS Co-Mo nanocatalysts, the metal content of aqueous solution including cobalt nitrate, ammonium heptamolybdate were then impregnated onto the prepared supports. Next, samples of prepared supports and... 

Highly active unsupported MoO3 and (Co) MoO3 catalysts were synthesized utilizing the solution combustion method where the Ammonium molybdate powder and an organic additive were used as precursors. Different organic materials including Ethylene Diamin Tetra-acetic acid (EDTA), Polyethylene Glycol 200 (PEG 200), Sorbitol and Urea were used as additive in order to investigate the effect of additive structure on morphology and particle size of products. Also various reaction parameters such as the additive/Mo molar ratio, concentration of metal ion in solution, pH of the reaction and temperature of the synthesis media were changed to study effects on product morphology and size. Outcomes were... 

Optimization of energy consumption is generally important in mobile networks and in particular in automotive networks. One of the challenges of installing roadside units in automotive case networks is to provide energy to the equipment assigned to these units. In some cases, power is easily available, but in many places, the cost of energy is very high and does not have economic justification. Therefore, optimization of energy consumption in roadside unit is of great importance. Typically, vehicles limitations in terms of energy consumption for communications are far lower than that of a roadside unit. In this dissertation, part of roadside communication to vehicles is shifted to the... 

Selective oxidation of H2S to elemental sulfur in a fixed bed reactor over seven nanocatalysts has been investigated and compared to commercial claus catalyst. Among them, Al2O3-supported sodium oxide nanocatalyst prepared with wet chemical technique and Al2O3 nanocatalyst prepared with spray pyrolysis method were the most active catalysts for selective oxidation of H2S to elemental sulfur. The remaining nanocatalysts were deactivated, mainly due to the interaction with H2S and conversion into sulfides. For synthesis of Al2O3 with spray pyrolysis method we use statistical design of experiments (box-behnken design) in order to screen the effects of significant synthesizing parameters  

Over the course of past decade, air pollution has been placed among the top issues chocking capital Tehran. Stationary source of air pollution is among the most important, but, less treated facors. On the year, 2014, Tehran’s air quality company addressed a number of projects in this very field could gain further governmental supports. This announcement could be a sign, showing the importance of this research. These researches in fact, have the potentioal to increase the authority’s decision making abilities in critical situations. As the models prognosticates future with acceptble accuracy, it leads to highly efficient dicissions. The results could also be used in demographic studies as... 

In this research a novel palladium nanocatalyst was synthesized over single-wall carbon nanotube (SWNT) support and then applied in the selective hydrogenation of acetylene in an ethylene rich-flow stream. This nanocatalyst displayed a very promising selectivity toward ethylene production upon rising of the temperature, as well as suppressing oligomer formation during acetylene hydrogenation. It was rationalized that the overwhelming governing mechanism for the acetylene hydrogenation over the 0.48 wt% Pd/SWNT was the hydrogen transfer. Furthermore, new operating conditions for selective hydrogenation of acetylene in ethylene rich-flow were introduced through which the selective... 

The major obstacle in using natural gas as a clean and abundant fuel in transportation industries is the low density of energy obtained from its combustion. Adsorbed Natural Gas (ANG) is a useful method to increase the energy density and store the natural gas. The lower cost and higher safety have made it different from the other storage technologies. In addition, ANG can be useful to solve the lack of gas in the peak of consumption. Among all adsorbents, Activated Carbon (AC) has shown the highest adsorption capacity of natural gas. In the present project, walnut shell has been used as the precursor in the chemical synthesise of AC. The main effective factors in chemical activation, such as... 

Dominance over the seismic behavior of structures leads to proper design and the cost reduction of structures according to the structures demand performance. In this regard, the issue of performance-based seismic design of structures has been proposed in which the nonlinear behavior of structures is the basis for the design and evaluation of structures during earthquakes. Moreover, regarding of soil under the structures will change the elastic and inelastic behavior of structures; also, the effects of soil-structure interaction on the seismic performance of structures should be considered to achieve the real behavior of structures. Hence, the purpose of this study is to evaluate the... 

One of the most important world issues is environmental constraints regarding the pollutants released by transportation fuels and refinery products, sulfur reduction being one of the most significant objectives. Deep hydrodesulfurization processes result in great sulfur reduction in refinery streams. However, such harsh process conditions increase undesired side reactions and facilitate coke formation as well as affecting the surfaces. More effective alternatives for hard process conditions are highly active and selective hydrodesulfurization catalysts, which enable the process to be performed at milder pressure and reaction conditions. Catalyst bases play a very important role in hydrogen... 

A series of V2O5 catalysts supported on multiwall carbon nanotube (MWCNT), single wall carbon nanotube (SWCNT) and graphene were synthesized by hydrothermal and reflux methods for oxidative dehydrogenation of propane (ODHP) to propylene. The catalysts were characterized by techniques including the BET surface area measurements, XRD, FTIR, H2-TPR, NH3-TPD, FESEM and UV-vis diffuse reflectance. The performance of the catalysts and the supports were subsequently examined in a fixed bed reactor. The vanadium catalyst supported on graphene with C/V molar ratio of 1:1 synthesized through the hydrothermal method had the best performance under the reactor test conditions of 450°C, feed C3H8/Air... 

In this research, molybdenum and tungsten catalysts modified with cobalt and nickel on a carbon support have been synthesized and investigated in the oxidation desulfurization process. A model fuel was used to evaluate the synthesized catalysts. This model fuel was n-decane. dibenzothiophene was also used as a sulfur model. The synthesized catalysts were subjected to various analyzes such as XRD, FTIR, Raman, BET-BJH, NH3-TPD, TEM and ICP-OES for structural evaluation. On the other hand, synthetic parameters such as metal loading rate, molar or weight ratio of secondary metal (cobalt and nickel) to primary metal (molybdenum and tungsten) and molar ratio of citric acid to primary metal as... 

Liquid marbles are droplets enwrapped by a layer of micro/nanoparticles. Due to the insulation of inner fluid from the environment, the lower evaporation rate of the fluid, and the capability of motion even on hydrophilic surfaces, these liquid marbles, as an alternative to conventional droplets, have attracted the attention of researchers in digital microfluidics. Utilizing ferrofluid as the liquid core of the liquid marbles enables remote control over the liquid marbles by an external magnetic field. In this research, the dynamic behavior of ferrofluid liquid marbles under the magnetic field generated by an electromagnet is investigated. In this research, governing physics on the motion of... 

In this study, thermal and rheological properties of nanofluids of water/carbon nanotubes, water/spherical silica nanoparticles and water/hybrid nanoparticles (hybrid of carbon nanotubes and spherical silica nanoparticles) have been investigated. To do so, carbon nanotubes have been synthesized by CCVD process and spherical silica nanoparticles and hybrid nanoparticles by wet chemical method. After synthesis of nanomaterials, nanofluids have been prepared by using SDBS as a dispersant with the concentration of 1.5 times of concentration of nanomaterials and then thermal conductivity, kinematic viscosity, dynamic viscosity and density of nanofluids have been investigated. As the results show,... 

Due to the potential risk of sulfur compounds in fossil fuels and according to today’s regulations, sulfur content should be kept as low as possible, e.g., below 5 ppm. Mercaptans are one of the sulfur components in natural gas. Scope of this research defined as catalytic removal of ethyl mercaptan from the gas stream. For this purpose, two microreactor systems placed in series. In the first microreactor, catalytic decomposition of ethyl mercaptan has been investigated. In the first step of this survey, a microreactor with 24 microchannels with a newly designed distributor has been developed with a computational fluid dynamic technique. in comparison to the conventional triangular... 

Monitoring is of particular importance after impounding and during dam operation. In all large dams, by installation of the required instruments the pore pressure, soil mass pressure and displacement during construction, first impounding and operation are measured, then the performance of dam will be analyzed and evaluated. The aim of this study is to evaluate the performance of the "Gavoshan" dam, which has an important role on agriculture development and drinking water supply at west part of Country. To reach this, the values resulting from instruments have been implemented by FLAC software, using "Back Analysis" method. However, this assessment is complete when "back analysis" method is...