Sharif Digital Repository

In this paper, first, two new criteria, which are titled social welfare percent (SWP) and congestion cost percent (CCP), are defined for static transmission expansion planning in restructured power systems. Then by a simple example it will be shown that none of the already presented market-based criteria could completely and truly evaluate the transmission network expansion from market view. Hence the SWP and CCP criteria altogether are proposed to completely and truly evaluate the transmission network expansion. Then a least-investment cost expansion plan is searched that its SWP and CCP are in predefined acceptable limits. The results of applying of the proposed method are illustrated over... 

In this paper, first, two new criteria, which are titled social welfare percent (SWP) and congestion cost percent (CCP), are defined for static transmission expansion planning in restructured power systems. Then by a simple example it will be shown that none of the already presented market-based criteria could completely and truly evaluate the transmission network expansion from market view. Hence the SWP and CCP criteria altogether are proposed to completely and truly evaluate the transmission network expansion. Then a least-investment cost expansion plan is searched that its SWP and CCP are in predefined acceptable limits. The results of applying of the proposed method are illustrated over... 

Nowadays automation in distribution systems is growing largely. Automated and remote controlled switches play prominent rules in automated distribution systems. By opening and closing these remote controlled switches in emergency states when a fault has been occurred we can manage fault and restoration process in order to minimize interruption time and costs. In the normal states feeder load management and power loss minimization can be controlled by these remote controlled switches. Finding optimum numbers and optimum locations for installing these switches is the main concern in this between. Up to now a number of algorithms have been developed for optimum switch placement. In this paper a... 

The use of Computer Science in order to categorize and store information, improve diagnostic and therapeutic procedures, patient education and the training of a skilled labor force, has taken important steps and there are constantly new developments in this area  

Simulation is the gold standard for training in aviation and trauma medicine. Now it is available for diseases diagnosis and treatment. With simulation, clinicians can practice their art in a realistic, consequence free environment, combining both theory and practice in a comprehensive program. Method and materials - In the virtual clinical environment of "VPsoft mentor" software, the practitioner reviews a patient's history, orders laboratory tests and procedures, interprets findings, renders diagnoses, and prescribes medication. Every diagnostic or treatment decision the clinician makes for the patient is analyzed by E-mentor, providing instant feedback.Results - This software have been... 

One of the most important issues in railway wheels is residual stresses. It is desirable to produce less residual stresses when possible and to decrease the remaining residual stresses in the wheels. The objective of this paper is to provide an estimation of the residual stresses in the rail wheel caused by the stress field from heat treatment process of a railway wheel. A three-dimensional nonlinear stress analysis model has been applied to estimate stress fields of the railway mono-block wheel in heat treatment process. After forging or casting, railway wheels are heat-treated to induce the desirable circumferential compressive residual stress in the upper rim. Finite element analysis... 

In this study, the behavior of gavoshan dam was evaluated during construction and the first impounding. A two-dimensional (2D) numerical analysis was conducted based on a finite difference method on the largest cross-section of the dam using the results of instrument measurements and back analysis. These evaluations will be completed in the case that back analysis is carried out in order to control the degree of the accuracy and the level of confidence of the measured behavior since each of the measurements could be controlled by comparing it to the result obtained from the numerical model. Following that, by comparing the results of the numerical analysis with the measured values, it is... 

Monitoring embankment dams is of crucial importance. In earth dams, the pore pressures, earth pressures, and displacements occurring during construction and function are measured at the time of the first impounding and exploitation by installing essential instruments, and so the dam's performance is evaluated and analyzed. Scope of the present research is the evaluation of Siah-Sang Dam performance through the results of instruments and back analysis, conducted by FLAC software. The Mohr-Coulomb elasticplastic model has been considered as the behavioral model of the dam, and the effect of the upstream shell's materials deformation has been modeled at the time of the initial impounding.... 

Ultra-high precision machining is proposed by externally actuating the work piece in linear motions in the X-Y plane and linear motion in the Z-axis. To solve the problems in the machining process such as nonlinearity and low repeatability positioning accuracy of machining tools in a larger scale, a novel platform for cutting tools in micro machining based on electrostatic linear micromotors and piezoelectric stack actuator system is presented. © 2017 IEEE  

In this study, the effects of geometry and operating conditions upon the thermal and hydraulic performance of Finned Microchannel Heat Sink (FMCHS) were investigated. Water and aluminum were considered as fluid and solid for the computational domain (30 mm × 0.8 mm × 0.8 mm). The Microchannel (MC) was supposed to have 0.65 mm height with an aspect ratio of 0.5. CFD analysis was applied for the assessments of four-types of micro-fins (i.e., conical, pyramidal, cylindrical and cubical). In order to evaluate the effects of height, diameter, the spacing of fins and Reynolds number on the overall performance of FMCHS, central composite design at five levels was used to generate design points.... 

Heating, Ventilating and Air Conditioning (HVAC) plant is a multivariable, nonlinear and non minimum phase system, which control of this plant, is very difficult. This paper presents a new approach to control of HVAC system. The proposed method is a hybrid of fuzzy logic and PID controller. Simulation results show that this control strategy is very robust, flexible and alternative performance. To evaluate the usefulness of the proposed method, we compare the response of this method with PID controller. The simulation results show that our method has the better control performance than PID controller