Loading...
Search for: rastegari--hossein
0.145 seconds

    Producing Ti-6Al-4V/TiC composite with superior properties by adding boron and thermo-mechanical processing

    , Article Materials Science and Engineering A ; Volume 564 , 2013 , Pages 473-477 ; 09215093 (ISSN) Rastegari, H ; Abbasi, S. M ; Sharif University of Technology
    2013
    Abstract
    In order to study the effect of boron addition on the microstructure and tensile properties of titanium matrix composites, two Ti-6Al-4V/10. Vol% TiC ingots with and without boron were fabricated by VIM furnace and hot rolling. The microstructures of composites were examined using optical microscopy (OM). The X-ray diffraction (XRD) was used to identify the phases present in the composites. Addition of boron resulted in the formation of needle shaped TiB in the matrix that was followed by the refinement of grain size. Compared with Ti-6Al-4V/TiC composite, the composite containing boron content exhibited a significantly higher ductility and lower strength. It was caused by the effects of... 

    Lexical pattern generalization for ontology learning and population: A survey

    , Article Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010, 17 March 2010 through 19 March 2010 ; 2010 , Pages 551-554 ; 9789881701282 (ISBN) Rastegari, Y ; Sayadiharikandeh, M ; Zibanezhad, B ; Sharif University of Technology
    2010
    Abstract
    Information extraction and refinement systems rely on a set of extraction patterns in pattern based approaches in order to construct taxonomies and finding instances of concepts in a corpus. Pattern based methods have high precision and suffer from low recall. Pattern generalization and modeling techniques can increase matching power and decrease GAP between training and test data  

    Mechanism of Al-Si codeposition on In738LC through single-step diffusion process

    , Article International Journal of Surface Science and Engineering ; Volume 11, Issue 1 , 2017 , Pages 1-11 ; 1749785X (ISSN) Nikzad, S ; Abdi, M ; Rastegari, S ; Sharif University of Technology
    2017
    Abstract
    The out-of-pack cementation method was applied to coat the Nickel-based super alloy IN738LC with Si-modified aluminide. Different mixtures of the pack containing pure Al, Si, alumina powders as an inert filler, and NH4Cl as a halide salt activator were used for co-deposition at 950 and 1,050°C. The results showed although the amount of subhalide vapour pressures of Al and Si were equal at 1,050°C, Al atoms diffused only after Si atoms had been deposited. Before heat treatment, the coating thickness formed by the pack containing 2.3 wt.% Al was 6 μm more than that containing 3.5 wt.% Al. After heat treatment, thickening coatings formed within the pack containing 2.3 wt.% Al was less than that... 

    Design and Manufacturing of Atmospheric Water Generation in Hot and Humid Area

    , M.Sc. Thesis Sharif University of Technology Rastegari, Amin (Author) ; Sadr Hosseini, Hani (Supervisor)
    Abstract
    This experimental study evaluates the implementation of atmospheric water generator (AWG) apparatus for rural households to supply the needed water. Humid (atmospheric) air is sucked into the condenser and passed through an air filter by a fan; since the temperature of the condenser is lower than the ambient air temperature (dew point temperature), the moist in the atmospheric air is condensed and freshwater is collected which is stored in a tank and after 7 stages of purification will be ready to drink.Data of this project is obtained from Kish Island’s weather station to find the average temperature and humidity. Kish Island is chosen for this project because of its high humidity and... 

    A new method for the solution of hybrid analog digital beamforming problems

    , Article Optimal Control Applications and Methods ; Volume 41, Issue 5 , 2020 , Pages 1735-1748 Amini, E ; Reza Marzban, H ; Rastegari, M ; Sharif University of Technology
    John Wiley and Sons Ltd  2020
    Abstract
    By going to millimeter wave (mmWave) we can use large scale MIMO due to short mmWave wavelength to overcome path loss by using beamforming to focus power of signal to the receiver. System structure of mmWave band is different with conventional MIMO because of large scale MIMO which is leading to use many RF-chains. For this reason Hybrid structure have been proposed for large Scale MIMO. By going to Hybrid structure a new issue has been created with phase shifter constraint. In this paper we propose a novel solution to make a hybrid precoding and combing to reach high spectral efficiency. Our problem includes a maximizing Frobenius norm of multiplying five complex matrices. As constraints,... 

    Elliptic Problems in Nonsmooth Domains

    , M.Sc. Thesis Sharif University of Technology Rastegari, Hossein (Author) ; Fotouhi Firouzabad, Morteza (Supervisor)
    Abstract
    The In this thesis, we focus are attention on elliptic boundry value problems in domain with nonsmooth boundaries and problems with mixed boundry conditions. Indeed most of the available mathematical theories about elliptic boundry value problems deal with domains with very smooth boundaries;few of them deal with mixed boundry conditions.However, the majority of the elliptic boundry value problems which arise in practice are naturally posed in domains whose geometry is simlpe but not smooth. These domains are very often three-dimensional polyhedra. For the purpose of solving them numerically these problems are usually reduced to two-dimensional domains. Thus the domains are plane polygons... 

    Multi-attribute queries: To merge or not to merge?

    , Article Proceedings of the IEEE Computer Society Conference on Computer Vision and Pattern Recognition ; 2013 , Pages 3310-3317 ; 10636919 (ISSN) Rastegari, M ; Diba, A ; Parikh, D ; Farhadi, A ; Sharif University of Technology
    2013
    Abstract
    Users often have very specific visual content in mind that they are searching for. The most natural way to communicate this content to an image search engine is to use key-words that specify various properties or attributes of the content. A naive way of dealing with such multi-attribute queries is the following: train a classifier for each attribute independently, and then combine their scores on images to judge their fit to the query. We argue that this may not be the most effective or efficient approach. Conjunctions of attribute often correspond to very characteristic appearances. It would thus be beneficial to train classifiers that detect these conjunctions as a whole. But not all... 

    Producing Ti-6Al-4V/TiC composite with good ductility by vacuum induction melting furnace and hot rolling process

    , Article Materials and Design ; Volume 32, Issue 10 , December , 2011 , Pages 5010-5014 ; 02641275 (ISSN) Rastegari, H. A ; Asgari, S ; Abbasi, S. M ; Sharif University of Technology
    2011
    Abstract
    In this paper, Ti-6Al-4V/TiC composite was fabricated by VIM furnace and graphite crucible. X-ray diffraction analysis and EDS techniques were used to identify the phases in the material. Microstructure characteristics of the Ti-6Al-4V/TiC composite were evaluated by means of optical microscopy. The tensile test was performed at room temperature after hot-rolling of the samples in the beta phase field. The results revealed that at different melting times, three kinds of precipitates are formed in the microstructure including grain boundary, eutectic and transgranular precipitates. The size of transgranular precipitates was significantly larger than that of the other two types of carbides and... 

    Collecting positive instances of "instance-of" relationship in the Persian language

    , Article ICECT 2010 - Proceedings of the 2010 2nd International Conference on Electronic Computer Technology, 7 May 2010 through 10 May 2010, Kuala Lumpur ; May , 2010 , Pages 46-49 ; 9781424474059 (ISBN) Rastegari, Y ; Abolhassani, H ; Zibanezhad, B ; Sayadiharikandeh, M ; Sharif University of Technology
    2010
    Abstract
    Fetching Lexico-Syntactic patterns from text rely on pairs of words (positive instances) that represent the target relation, and finding their simultaneous occurrence in text corpus. Due to existence of WordNet thesaurus (which contains the semantic relationship between words), collecting positive instances is easy. In non-english languages, it's hard to collect large number of positive instances in various contexts. We investigated some new ideas for collecting them in Persian language and finally run the best one and collected approximately 6,000 positive instances  

    Change-request buffer role in configuration management process

    , Article International Conference on Software Engineering Theory and Practice 2010, SETP 2010, 12 July 2010 through 14 July 2010 ; 2010 , Pages 130-133 ; 9781617820731 (ISBN) Salajegheh, A ; Rastegari, Y ; Sayadiharikandeh, M ; Rastegari, S ; Sharif University of Technology
    2010
    Abstract
    CMMI is a unified model for software and system engineering in organizations. The initial CMM has been designed for software development. According to its successes, different models were developed by different groups such as: SECM, SACMM, IPDCMM, and FAAICMM. CMM Integration was introduced due to some problems such as lack of uniformity, overlapping, and incompatibility of mentioned models. Current paper is a research on CMMI, especially on configuration management process. We believe that accepting all change requests lead to ad-hoc versions and rejecting them lead to customer dissatisfaction. Therefore a Change-Request buffer is needed in configuration management process based on CMMI... 

    Investigating Effect of Data Features on Robustness of Deep Neural Networks Against Adversarial Attacks

    , M.Sc. Thesis Sharif University of Technology Rastegari Nejad, Mohammad Javad (Author) ; Jalili, Rasool (Supervisor)
    Abstract
    The impressive performance of deep neural networks in various fields has led to the spread of this technology in various organizations and businesses. Training a neural network is a costly process due to the need of collecting relevant data and high computational cost; in this sense, a trained network is considered a valuable asset to any organization. One of the most important attacks against these networks is model extraction attacks. Model extraction attacks are implemented with the aim of training an surrogate model for the target learning model, and in addition to violating the intellectual property of the target model, they can be the basis of other attacks such as an adversarial... 

    Al2O3-ZrO2 nanostructured coatings using DC plasma electrolytic oxidation to improve tribological properties of Al substrates

    , Article Applied Surface Science ; Volume 356 , November , 2015 , Pages 927-934 ; 01694332 (ISSN) Barati, N ; Meletis, E. I ; Golestani Fard, F ; Yerokhin, A ; Rastegari, S ; Faghihi Sani, M. A ; Sharif University of Technology
    Elsevier  2015
    Abstract
    Alumina-zirconia nanostructured coatings were formed on 7075 Al alloy through Plasma Electrolytic Oxidation (PEO) operated in aDC potentiostatic mode. The composite coatings were produced in the range of 425-500 V in an alkaline electrolyte containing 4 g/LK2ZrF6. Tribological properties of coatings were investigated using dry sliding wear test against WC balls with a pin-on-disc tribometer. Wear rates were evaluated using optical profilometer. It was shown that the nanostructured alumina-zirconia composite coatings can be formed at voltages 450 V. The coating thickness and roughness were in the range of 15.2-24.2 μm and 0.68-2.35 μm, respectively. The distribution of Al, Zr and O in the... 

    Investigating the Effect of Hot Rolling of Ti-6Al-4V Alloy Containing Titanium Carbonitride Particles and Boron Addition on Microstructure Evolution and Mechanical Properties

    , M.Sc. Thesis Sharif University of Technology Rastegari Qupaei, Habibollah (Author) ; Ziaei Moayyed, Ali Akbar (Supervisor) ; Asgari, Sirus (Supervisor) ; Abbasi, Mehdi (Supervisor)
    Abstract
    In this thesis, two ingot of Ti-6Al-4V alloy containing titanium carbonitride particle, one with adding boron and the other without boron were fabricated by VIM furnace and using graphite crucible. Boron was added for the purpose of investigating its effect on microstructural evolution and mechanical properties. By Processing Casting ingots under TMP and heat treatment sequences, strips with 3 millimeter thickness were produced. In secondary rolling stage, rolling temperature was considered variable in alpha and alpha + beta phase field and its effect was studied on microstructural characteristics and mechanical properties. In as-rolled condition, it was found that increasing the rolling... 

    Calculation of the Energy Release Rate of Nano-Cracks in FCC Materials Via the Many Body Atomic Scale FEM

    , M.Sc. Thesis Sharif University of Technology Ostad Hossein, Alireza (Author) ; Mohammadi Shodja, Hossein (Supervisor)
    Abstract
    Since the classical continuum theory fails to deal with the problems associated with defects, stress concentrators, and relevant deformation phenomena in solids, alternative approaches that can detect the atomistic nature of materials' fracture are required. The deficiency of the capture the size effect which yields delusively high values for some components of the stress field right on the edge of the stress concentrators, and its weakness in describing the complex interaction between small inhomogeneities, cracks and the like when they are only a few nanometers apart, are among some of the disadvantages of the classical approach. In recent years, however, atomistic methods are emerging to... 

    Semisolid Stir Joining of As-Cast Silicon-Aluminum Bronze

    , M.Sc. Thesis Sharif University of Technology Ferasat, Keyvan (Author) ; Kokabi, Amir Hossein (Supervisor) ; Ashuri, Hossein (Supervisor)
    Abstract
    Aluminum Bronzes have many applications in marine environments. These alloys suffer from both hot cracking and cold cracking. In order to overcome the hot cracking and cold cracking, Semisolid Stir Joining method and a proper thermal cycle was used respectively. Effects of temperature, stirring rate, and tool type were investigated in Semisolid Stir joining method. In this method, butt joint design was used in order to place specimens, and the specimens were heated up to specific temperatures (920, 925, 930°C). A stirrer (Cylindrical and Grooved tool) with three rotational speeds (800, 1200, 1600 RPM) was introduced into the stir weld seam. Welded specimens were cooled to the 900°C... 

    The Study of Eliminating Gender Gap in Iran Labor Market on Participation Rate of Married Urban Women

    , M.Sc. Thesis Sharif University of Technology Asghari, Fatemeh (Author) ; Rahmati, Mohammad Hossein (Supervisor) ; Joshaghani, Hossein (Supervisor)
    Abstract
    The low female labor force participation rate in the Iranian labor market relative to the global average and even to countries that do not differ significantly from the socio-economic characteristics of our country is one of the important questions of the Iranian labor market. In this study, we seek to answer the question of whether the economic participation rate of married women will increase if the gender gaps in wages, job findings and job losses among women and men are eliminated in the Iranian labor market. To answer this question using household expenditure and income data and labor force data, we show that between the two categories of occupations, in terms of the share of women's... 

    Graph homomorphisms through random walks [electronic resource]

    , Article Journal of Graph Theory ; 2003, Volume 44, Issue 1, pages 15–38 Daneshgar, A. (Amir) ; Hajiabolhassan, Hossein ; Sharif University of Technology
    Abstract
    In this paper we introduce some general necessary conditions for the existence of graph homomorphisms, which hold in both directed and undirected cases. Our method is a combination of Diaconis and Saloff–Coste comparison technique for Markov chains and a generalization of Haemers interlacing theorem. As some applications, we obtain a necessary condition for the spanning subgraph problem, which also provides a generalization of a theorem of Mohar (1992) as a necessary condition for Hamiltonicity. In particular, in the case that the range is a Cayley graph or an edge-transitive graph, we obtain theorems with a corollary about the existence of homomorphisms to cycles. This, specially, provides... 

    Unique list-colourability and the fixing chromatic number of graphs [electronic resource]

    , Article Discrete Applied Mathematics ; Volume 152, Issues 1–3, 1 November 2005, Pages 123–138 Daneshgar, A. (Amir) ; Hajiabolhassan, Hossein ; Sharif University of Technology
    Abstract
    In this paper we introduce a chromatic parameter, called the fixing chromatic number, which is related to unique colourability of graphs, in the sense that it measures how one can embed the given graph G in G∪Kt by adding edges between G and Kt to make the whole graph uniquely t-colourable. We study some basic properties of this parameter as well as its relationships to some other well-known chromatic numbers as the acyclic chromatic number. We compute the fixing chromatic number of some graph products by applying a modified version of the exponential graph construction  

    Circular colouring and algebraic no-homomorphism theorems

    , Article European Journal of Combinatorics ; Volume 28, Issue 6, August 2007, Pages 1843–1853 Daneshgar, A. (Amir) ; Hajiabolhassan, Hossein ; Sharif University of Technology
    Abstract
    In this paper, we apply some new algebraic no-homomorphism theorems in conjunction with some new chromatic parameters to estimate the circular chromatic number of graphs. To show the applicability of the general results, as a couple of examples, we generalize a well known inequality for the fractional chromatic number of graphs and we also show that the circular chromatic number of the graph obtained from the Petersen graph by excluding one vertex is equal to 3. Also, we focus on the Johnson–Holroyd–Stahl conjecture about the circular chromatic number of Kneser graphs and we propose an approach to this conjecture. In this regard, we introduce a new related conjecture on Kneser graphs and we... 

    Density and power graphs in graph homomorphism problem

    , Article Discrete Mathematics ; Volume 308, Issue 17, 6 September 2008, Pages 4027–4030 Daneshgar, A. (Amir) ; Hajiabolhassan, Hossein ; Sharif University of Technology
    Abstract
    We introduce two necessary conditions for the existence of graph homomorphisms based on the concepts of density and power graph. As corollaries, we obtain a lower bound for the fractional chromatic number, and we set forward elementary proofs of the facts that the circular chromatic number of the Petersen graph is equal to three and the fact that the Coxeter graph is a core