Sharif Digital Repository

The vision of future space exploration includes missions to deep space that require communication among ground stations on ground and another planets such as mars, moons, satellites in different orbiters, asteroids, robotic spacecrafts, and specially for crewed vehicles for delivering information. These communications requires high bit rate for autonomous operations and also have several different limitations. These type of communications set as a network that is called Interplanetary Network (IPN). There are difference challenges in space communication that TCP and UDP are not able to address them such as Long propagation delay, asymmetric bandwidth, etc. In this work, a congestion method... 

This work presents a simulation framework to investigate the rigorous transient behavior of integrated systems comprising natural gas and power transmission networks, and a chemical plant whose feedstock is natural gas. This framework entails dynamic models for the gas transmission network and the SynGas plant, and a continuous-time AC-power flow formulation with dispatchable loads. It addresses the following key challenges: (i) analyzing energy and chemical system interdependencies, and their impacts on each other's supply reliability and security; (ii) providing an environment conducive to settling a critical question of how to prioritize the natural gas consumption as fuels of power... 

Fabrication and characterization of different surface charged cellulose electrospun scaffolds including cellulose acetate (CA), cellulose, carboxymethyl cellulose (CMC) and quaternary ammonium cationic cellulose (QACC) for biomedical applications have been reported in this research. Several instrumental techniques were employed to characterize the nanofibers. MTT assay and cell attachment studies were also carried out to determine the cytocompatibility, viability and proliferation of the scaffolds. Fabricated CA, cellulose, CMC and QACC nanofibers had 100–600 nm diameter, −9, −1.75, −12.8, + 22 mV surface potential, 2.5, 4.2, 7.2, 7 MPa tensile strength, 122, 320, 515, 482 MPa Young modules,... 

Background: Newcastle disease virus (NDV) has shown noticeable oncolytic properties, especially against cervical cancer. However, in order to improve the spread rate and oncotoxicity of the virus, employment of other therapeutic reagents would be helpful. It has been shown that some viral fusogenic membrane glycoproteins (FMGs) could facilitate viral propagation and increase the infection rate of tumor cells by oncolytic viruses. Additionally, immune checkpoint blockade has widely been investigated for its anti-tumor effects against several types of cancers. Here, we investigated for the first time whether the incorporation of influenza hemagglutinin-2 (HA2) FMG could improve the oncolytic... 

Electrospinning is a process that produces nanofiber through the action of an external electric field imposed on a polymer solution or melt. This paper introduces a new system capable of producing continuous uniaxially aligned PAN nanofiber yarn by manipulating the electric field. The manipulation was carried out by employing a negative charged bar in the electric field of conventional electrospinning system, leading to the formation of an electrostatic multipolar field. As a result, the main stream was redirected towards a rotating take up unit, collecting the twisted yarn consisting of uniaxially aligned nanofibers. The yarns were then treated in boiling water under tension and their... 

Engineering hollow and porous platinum nanostructures using biomolecular templates is currently a significant focus for the enhancement of their facet-dependent optical, electronic, and electrocatalytic properties. However, remains a formidable challenge due to lack of appropriate biomolecules to have a structure-function relationship with nanocrystal facet development. Herein, human hemoglobin found to have facet-binding abilities that can control the morphology and optical properties of the platinum nanoclusters (Pt NCs) by regulation of the growth kinetics in alkaline media. Observations revealed the growth of unusual polyhedra by shape-directed nanocluster attachment along a certain... 

Application of construction and demolition (C&D) wastes were considered as sustainable development goals (SDGs) for maintaining raw materials. Also, lightweight concretes such as aerated autoclaved concrete (AAC) were used for partitioning spaces in the building industry. Moreover, the waste products of the mentioned materials were increased due to the rise of old construction demolitions. This study contributes a calcinated aerated autoclaved concrete (CAAC) which is efficient, powerful, highly rapid, non-expensive and novel adsorbent for the removal of cationic dyes including malachite green (MG), methyl violet (MV) and methylene blue (MB) form water samples. The impacts of different... 

Application of construction and demolition (C&D) wastes were considered as sustainable development goals (SDGs) for maintaining raw materials. Also, lightweight concretes such as aerated autoclaved concrete (AAC) were used for partitioning spaces in the building industry. Moreover, the waste products of the mentioned materials were increased due to the rise of old construction demolitions. This study contributes a calcinated aerated autoclaved concrete (CAAC) which is efficient, powerful, highly rapid, non-expensive and novel adsorbent for the removal of cationic dyes including malachite green (MG), methyl violet (MV) and methylene blue (MB) form water samples. The impacts of different... 

This paper presents the influence of the severe shot peening process on the fatigue life of the laser-cladded Inconel 718 specimens which can be employed during refurbishment of components enduring high mechanical cyclic loads such as gas turbine components. In order to quantitatively evaluate the destructive effect of laser cladding on the fatigue endurance, fatigue tests are first performed on the as-received and laser-cladded specimens. Then, microstructural analysis by scanning electron microscope (SEM) is carried out to identify the root causes of the drawback of laser cladding. Moreover, by employing a comprehensive laser-cladding FE analysis considering cyclic plastic material... 

In this work effect of composition changes of injection gas, CH4 + CO2, on the performance of immiscible WAG injection in light oil, 41 oAPI, which has been rarely attended in the available literature is investigated. Presence of CO2 helps to reduce the MMP of CH4 significantly. Core flood experiments are conducted at reservoir conditions and fixed flow rate of 0.5cc/min on a sandstone sample with the brine concentration of 5000 ppm, and the influence of injection gas composition as well as WAG ratio on oil recovery is investigated. Different mole percents of methane in mixture, 0%, to 100% are examined, and the tests continued to ten alternate cycles with a slug size of 0.1 pore volumes and... 

Feeding a laboratory furnace with the gaseous kerosene, the resulting two-phase turbulent flame is simulated to study the effects of injecting soot nano-particles into the inflow air on the emissions of smoke aerosol, CO, and CO2species pollutants, and the resulting radiation heat transfer. We use our past experiences in aerosol modeling of soot nano/micro particles in turbulent nonpremixed flames burning simple hydrocarbon fuels and extend them to study the effects of injecting gaseous kerosene on the aforementioned parameters. To model the evolutionary process of soot nanoparticle formation, i.e., the nucleation, coagulation, surface growth, and oxidation, we employ a two-equation soot... 

Recently graph theory and complex networks have been widely used as a mean to model functionality of the brain. Among different neuroimaging techniques available for constructing the brain functional networks, electroencephalography (EEG) with its high temporal resolution is a useful instrument of the analysis of functional interdependencies between different brain regions. Alzheimer's disease (AD) is a neurodegenerative disease, which leads to substantial cognitive decline, and eventually, dementia in aged people. To achieve a deeper insight into the behavior of functional cerebral networks in AD, here we study their synchronizability in 17 newly diagnosed AD patients compared to 17 healthy... 

The inhibition effects of 3.5 bis (2-pyridil) 4-amino 1,2,4 triazole (NBTA) and 1-10 phenantrolin (PHEN), on corrosion of mild steel in acid solutions, (sulphuric acid and hydrochloric acid) were studied. The Tafel polarisation and ac impedance techniques were employed. Results obtained reveal that both compounds are relatively good inhibitors. The inhibition efficiencies of NBTA are higher in hydrochloric acid than in sulphuric acid. This has been attributed to the synergistic effect of chloride ions present in hydrochloric acid. The mechanism of inhibition of PHEN is believed to be owing to the formation of insoluble chelates between the organic molecules and atom/ion on the metal surface.... 

In this paper, a new fatigue lifetime prediction model is presented for the aluminium-silicon-magnesium alloy, A356.0. This model is based on the plastic strain energy density per cycle including two correction factors in order to consider the effect of the mean stress and the maximum temperature. The thermal term considers creep and oxidation damages in A356.0 alloy. To calibrate the model, isothermal fatigue and out-of-phase thermo-mechanical fatigue (TMF) tests were conducted on the A356.0 alloy. Results showed an improvement in predicting fatigue lifetimes by the present model in comparison with classical theories and also the plastic strain energy density (without any correction...