Sharif Digital Repository

This paper investigates the dynamic interactions between large-scale PV plants and nearby synchronous generators. To this end, a comprehensive model of a PV plant, including the PV arrays characteristic and their voltage controller, DC/DC converter, DC-link dynamic, DC/AC inverter controllers, and output filter, is obtained. Then, the eigenvalues of the PV plant model are calculated, and it is revealed that the PV plant has a dynamic mode in the sub-synchronous oscillations (SSOs) range. Furthermore, the modal analysis method is employed, and it is shown that the inductance of the DC/DC converter and the DC-link capacitor significantly contribute to the PV sub-synchronous mode. Also, it is... 

High penetration of photovoltaic (PV) plants in power systems may reduce the damping of electromechanical (EM) oscillatory modes. Implementing auxiliary controllers in the PV plant control system is a well-known technique that can improve the damping of these oscillations. Active power modulation (APM) is an effective auxiliary-control-based method that requires an energy source. Previous works have proposed employing an external energy storage system (ESS) as the energy source of the APM or deloading the PV plant by moving away from its maximum power point (MPP) characteristic. However, installing ESSs is expensive, and distancing from the MPP is not economical. By focusing on the dc-side... 

Numerical simulation of the electrical field distribution helps in-depth understanding of the mechanisms behind the responses and the benefits of the high voltage pulse comminution. The COMSOL Multiphysics package was used to numerically simulate the effect of ore compositions in this study. Regarding phosphate ore particles shape and composition, the effects of mineral composition, particle size, particle shape and electrodes distance were investigated on the electrical field intensity and distribution. The results show that the induced electrical field is significantly dependent on the electrical properties of minerals, the feed particle size and the location of conductive minerals in... 

Numerical simulation of the electrical field distribution helps in-depth understanding of the mechanisms behind the responses and the benefits of the high voltage pulse comminution. The COMSOL Multiphysics package was used to numerically simulate the effect of ore compositions in this study. Regarding phosphate ore particles shape and composition, the effects of mineral composition, particle size, particle shape and electrodes distance were investigated on the electrical field intensity and distribution. The results show that the induced electrical field is significantly dependent on the electrical properties of minerals, the feed particle size and the location of conductive minerals in... 

The use of parallel converters is one of the most practical solutions to solve the problem of transmitting bulk power generated in megawatt wind turbines to the grid. In spite of several advantages of paralleling, some considerations must be taken into account. Zero-sequence circulating current flowing between parallel converters is one of these concerns. Characteristic differences and discrepancy of zero-axis duty cycles of the parallel converters are considered as the main origins of this current. This paper investigates another source of this phenomenon in space vector modulation controlled converters. This unnoticed source is the notable third-harmonic voltage generated in the... 

This study proposes a modified virtual inertial control (MVIC) scheme for doubly-fed induction generator (DFIG)based wind turbines (WTs), which both improves the frequency response of these renewable resources and enhances the power system oscillation damping capabilities. It is shown that the proposed control structure enables the WT to participate prudentially in system frequency regulation, which means the amount of WT kinetic energy released to the grid and its participation in system frequency support is alleviated as its stored energy decreases. The proposed control strategy is introduced conceptually, and its performance is verified analytically. Effects of wind speed variations on... 

Providing ancillary services such as frequency support and power operating reserve by doubly fed induction gener-ator-based wind turbines has received considerable attention in the recent years, and several auxiliary controllers have been proposed to provide these services. In this paper, small-signal stability of wind turbines equipped with these controllers is assessed in presence of a frequency event and varying wind speed conditions. For this purpose, first, several auxiliary controllers are discussed, and a unified auxiliary controller (UAC) is proposed, which can represent all of these controllers simultaneously. Then, the overall transfer function from the wind speed to the wind... 

Small Permanent Magnet Synchronous Generators (PMSGs) are widely used in small rooftop wind turbines. In order to inject the electric power generated by the PMSG, into the grid, a back-to-back AC/DC/AC converter is required. In this paper, a low cost with high efficiency converter is proposed for the rectifier stage to obtain the maximum power per ampere of PMSG. This structure based on Discontinuous Conduction Mode Single-Ended Primary Inductor Converter (DCM SEPIC) with a single power electronic switch, proposes a converter which is cost-effective and suitable for the small wind turbine used in residential applications. Furthermore, other advantages of the proposed converter include... 

Small Permanent Magnet Synchronous Generators (PMSGs) are widely used in small rooftop wind turbines. In order to inject the electric power generated by the PMSG, into the grid, a back-to-back AC/DC/AC converter is required. In this paper, a low cost with high efficiency converter is proposed for the rectifier stage to obtain the maximum power per ampere of PMSG. This structure based on Discontinuous Conduction Mode Single-Ended Primary Inductor Converter (DCM SEPIC) with a single power electronic switch, proposes a converter which is cost-effective and suitable for the small wind turbine used in residential applications. Furthermore, other advantages of the proposed converter include... 

In this paper, design and optimization of a ladder-type single-sided linear induction motor (Ladder SLIM) for machine tool applications is investigated. High-speed linear induction machines suffer from the end-effect phenomenon, which can reduce the thrust and result in declined output characteristics. Although it is common to consider this phenomenon in high-speed applications, it is essential to take it into account in the design and analysis of low-speed low-air-gap linear machines. In addition, Ladder SLIMs have significant flux density ripples, and using skewed bars for secondary of the machine is a common solution for it. Therefore, providing required equations, an algorithm for... 

Wind turbine generators (WTG) can participate in system frequency regulation via virtual inertial controllers (VIC). In the presence of frequency disturbances, VIC temporarily regulates the WTG power output forcing it to release/absorb kinetic energy into/from the grid. With increasing penetration of WTGs in power systems, grid operators require these generators to provide frequency regulation services; however, kinetic energy release/absorption can destabilize WTGs. Hence, to address these issues, a new large-perturbation nonlinear WTG model is proposed in this paper, based on the WTG internal response that is used to tune typical VICs. Novel worst case and optimal VIC tuning approaches are... 

Isolated microgrids depend mainly on diesel generation and have polluting transportation. This is being addressed by the introduction of renewable energy resources and electric vehicles (EVs). Hence, this paper presents a novel long-term planning model for the introduction of EVs in isolated microgrids. This work studies the replacement of internal combustion vehicles with electric ones by analyzing their respective investment, maintenance and operation costs. Various case studies are discussed, considering different EV and solar photovoltaic (PV) penetration levels, and varying prices of diesel in the planning horizon. Results demonstrate that investing in EVs could significantly reduce net... 

In a MIMO (Multiple Input Multiple Output) radar system, proper design of transmit signal and receive filter is an advantageous tool to improve the detection performance. Thus, in this paper, we consider the problem of transmit code and receive filter design, in order to maximize the Signal to Noise Ratio (SNR) at the receiver while enforcing a similarity constraint between the transmit space-time code (STC) and a reference STC which has a desirable ambiguity function. We will show that by solving such constrained optimization problem through successive iterations, our proposed method leads to satisfactory results  

Weighting elements to achieve radiation patterns with desired characteristics is a classical work in phased array antennas. These characteristics can be low sidelobe level, narrow beamwidth, high directivity, pattern nulling in special angle and etc. For each of these characteristics, different methods have been introduced. Most of methods have been presented for uniform arrays, however there are lots of methods to obtain a desired pattern for antennas with non-uniform element distances. The problem with these methods is complexity or not very good results. In this paper, fast and easy methods based on Least Square Error that leads to good results are presented. In addition, weighting of... 

Distributed generation connected with AC, DC, or hybrid loads and energy storage systems is known as a microgrid. Campus microgrids are an important load type. A university campus microgrids, usually, contains distributed generation resources, energy storage, and electric vehicles. The main aim of the microgrid is to provide sustainable, economical energy, and a reliable system. The advanced energy management system (AEMS) provides a smooth energy flow to the microgrid. Over the last few years, many studies were carried out to review various aspects such as energy sustainability, demand response strategies, control systems, energy management systems with different types of optimization... 

This paper resolve the salinity-dependent interactions of polar components of crude oil at calcite-brine interface in atomic resolution. Molecular dynamics simulations carried out on the present study showed that ordered water monolayers develop immediate to a calcite substrate in contact with a saline solution. Carboxylic compounds, herein represented by benzoic acid (BA), penetrate into those hydration layers and directly linking to the calcite surface. Through a mechanism termed screening effect, development of hydrogen bonding between –COOH functional groups of BA and carbonate groups is inhibited by formation of a positively-charged Na+ layer over CaCO3 surface. Contrary to the common... 

An important tool for assessing a radar's performance is the ambiguity function. On the other hand, many different schemes have been designed for the transmit waveforms of a MIMO radar. For each one, a criterion has been chosen to improve the performace, e.g. achieving better missed detection. In this paper, considering the ambiguity function as the benchmark, we propose a waveform design scheme, which optimizes the ambiguity function of the MIMO radar system  

Flow hydrodynamics of laminar falling film of aqueous Li Br solution (Li Br - H2O) on a horizontal elliptical tube has been investigated in this research. The film velocity distribution and film thickness, namely, the flow characteristics are determined by solving analytically simultaneous simplified Navier - Stokes equations and continuity equation in polar and Cartesian coordinates. The analysis is based on steady state laminar flow of falling liquid film of Li Br - H2O on a horizontal elliptical tube in polar model and Cartesian model (CM), for cases in which traction on the film surface is considered negligible. Models are compared with each other in three cases of aspect ratios (Ar),...