Sharif Digital Repository

An isopropanol supercritical reducing environment was prepared by fabricating a high temperature, high pressure autoclave, in order to make a hybridized structure of zinc oxide and graphene oxide, entitled as ZnO-G. In this novel structure, the oxygen acts as bridging element between zinc and carbon, that connects a wide band gap semiconductor to a narrow banded one. The hybridization mechanism is studied by FTIR analysis, and morphology is shown by FE-SEM. The micrographs obtained from the thin film show a stacked pile of ZnO-G disks, like a button, dispersed on a crack free layer. In addition, the crystallographic structure was revealed by comparing low angle X-ray diffraction patterns to... 

Nowadays, some of the major problems of the airplane industry is that airplanes’ fleet are approaching to the end of their defined life, inability to buy new planes and obtaining aircraft’s parts for repairing process. Therefore, in order to increase the life of the aging aircrafts, some essential process such as modeling processes, identify principal structure elements to strengthen and repair them should be done to all these airplanes, all these processes refer as aging process. Aging programs initiated in some countries, such as America, Australia, Britain and Canada from about thirty-five years ago, technological approaches inventing new ways to start repairing worn metallic structures... 

Wireless Body Area Network (WBAN) is one of the emerging technological trends that paves the way for the next generation medical systems by offering proactive wellness management and early detection of diseases. WBAN, as standardized by IEEE 802.15.6, is a network composed of intelligent, miniaturized, low power sensors that are strategically implanted in, placed on, or in close proximity to the human body. The sensors have responsibility for recording vital physiological signals and wirelessly transmitting them to a central hub for further processing. In this study, we have first investigated the applicable channel models for a typical WBAN. Considering various scenarios with different... 

Aluminum is the lightest industrial element after magnesium. As a result, aluminum alloys have many industrial usages because of their high specific strength. Semisolid casting is one of the processes that is capable of producing aluminum alloys with high mechanical properties. In this process, there are a wide variety of methods to prepare semisolid slurry, one of the best ways of which to produce globular structure is electromagnetic stirrer. In this research, the semisolid slurry of A356 aluminum alloy is fabricated by electromagnetic stirrer under different conditions of stirrer intensity current, stirring time and pouring temperature. Then the fabricated semisolid slurry is injected... 

Titanium nano-oxide (TiO2) coatings have been used for self-cleaning, antimicrobial, and dust-proof designs. The degree of wetting of a solid surface with water in humid air depends on how the surface tension of the existing phases relates. The ratio between these tensions estimates the contact angle between a drop of water and the surface on which it is placed. A contact angle above 150 º is essential for surface overflow. In this study, 18 different combinations of titanium oxide and FAS, PDMS and PMS nanoparticles were obtained with a static contact angle of 165 to 150 º and a dynamic contact angle of 7 º.1 to 4.5 º. Following the measurement of water droplet slip speed on a sloping... 

We show that the equations of reinforcement learning and light transport simulation (rendering equation) are related integral equations. Based on this correspondence, a scheme to learn importance while sampling path space is derived. The new approach is demonstrated in a consistent ray tracing algorithm that uses reinforcement learning to progressively learn where light comes from. As using this information for importance sampling includes information about visibility, too, the number of light transport paths with non-zero contribution is dramatically increased, resulting in much less noisy images within a fixed time budget  

WO3 is known as a photocatalyst in the visible light region, but with lower efficiency compared to more interesting semiconductor photocatalysts such as TiO2 and ZnO. Many attempts have been done to increase the efficiency of this photocatalyst by incorporating metal and metal oxide nanoparticles or recently carbon nanotubes.On the other hand, application of graphene, as an unrolled carbon nanotube, for increasing the photocatalytic activity of TiO2 and ZnO has shown positive results. Furthermore, it was reported that such semiconductor photocatalysts (and very recently WO3) can photocatalytically reduce the chemically exfoliated graphene oxide sheets under UV-vis irradiation.
In this... 

Graphene is a one layer atom thickness and zero energy gap so for using it in nano electronic and transistors baised on graphene it's energy gap should be opened.one of the methods for opening graphene band gap is creating nano scale boundaries or synthesize graphene nanoribbons. One of the new methods for graphene nanoribbon synthesize is longitudinal opening of carbon nanotube. In this thesis graphene nanoribbons synthesize with this method and analyze with AFM and Raman spectroscopy. Carbon nanotubes also have energy gap and IR absorption recently they used for living cell destruction. In this thesis we synthesize graphene nanoribbons and analyzing their optical absorption and use it for... 

TiO2 is known as a photocatalyst in near UV-Visible light region with better efficiency compared to other semiconductor photocatalysts. Many attempts have been done to increase the efficiency of this photocatalyst. also, application of 2D carbon nanostructures namely graphene for increasing the photocatalytic activity of TiO2 has shown positive results.
In this research, we first synthesized Graphene Oxide (GO) suspension by exfolation of graphite oxide suspension. then we fabricated TiO2 thin films on glass substrates by so-called sol-gel method. finally we fabricate Graphene Oxide/TiO2 nanowalls composite films as a photocatalyst in visible light. X-ray photoelectron spectroscopy... 

Graphene nanogrids fabricated by graphene nanoribbons obtained through oxidative unzipping of multi-walled carbon nanotubes, used as two-dimensional selective templates for accelerated differentiation of human mesenchymal stem cells (hMSCs), isolated from umbilical cord blood, into osteogenic lineage. The biocompatible and hydrophilic graphene nanogrids showed high actin cytoskeleton proliferations that coinciding with patterns of the nanogrids. The amounts of proliferations found are slightly better than proliferation on hydrophilic graphene oxide (GO) sheets, and significantly higher than non-uniform proliferations on hydrophobic reduced graphene oxide (rGO) sheets and polydimethylsiloxane... 

One atom thick layer of pure carbon in bonded and hexagonal lattice is named graphene. graphene has unique mechanical, optical, thermal and electrical properties and because of these properties has grabbed attention. graphene has been made from high pure graphite by different methods such as CVD(chemical vapor deposition) , chemical exfoliation , micromechanical cleavage and colloidal suspension. through these methods, green methods for synthesis of graphene, using eco-friendly reductants during synthesis of graphene instead of hydrazine and recently using waste(not graphite) are attractive for synthesis of graphene. Following this idea , a group has produced graphene from wastes such as... 

Graphene oxide is a single sheet of Carbon atoms which has been arranged on a two-dimensional honeycomb lattice. Functional groups such as epoxy, carboxyl and carbonyl are located on basal plane and at the edges of graphene oxide and they localize electrons on the surface of graphene oxide and open band gap in its band structure. Pure graphene has zero band gap, so existence of fluorescence properties is unlikely; but graphene oxide has fluorescence properties due to band gap in its band structure. Fluorescence properties of graphene have been used in live cell imaging and drug delivery, so study and increasing of fluorescence properties is significantly important. The purpose of this... 

Graphene is a two dimensional lattice which is created from carbon atoms. Having special feature, it has such various medical usage, for example in diagnosing and treating cancer. Adding a particular factor to graphene could improve their efficiency. In comparis on with graphene itself, graphene oxide and reduced graphene oxide are much more successful in diagnosing and treating than others because of their higher hygroscopic. Recent studies state that hydrogenized combinations including hydrogenized graphene show desired results. Due to its higher hygroscopic and the possibility of adherence to the cells, hydrogenized graphene could be very effective in diagnosing and treating the sarcomas.... 

This study discusses about mass customization and optimization of supply network in which both goal considering to set the flow of raw material and final product to satisfy the customer demand. The mass customization is more important concept in this study, so that this goal is placed to the first objective. In this research, the model which contained both goal is presented. The model focus on mass customization and try to satisfy various products demand, which constitute 3 kind of speed demands. Each product can satisfy in 3 way: fast, normal, slow.In the first model the new approach present in which the speed affects all of supplying, manufacturing and distributing system. The system try...