Sharif Digital Repository

The primary purpose of the present thesis is to understand the dynamic behavior of partially premixed flames of counterflow burners. In this project, work has been done on the previously designed and built counterflow burner. By setting up partially premixed flames in this burner, acoustic excitation of these flames has been done, and finally data acquisition by taking video of the flame and then using image processing to extract the dynamic response of these flames. The flames that we have examined in this project are all in a laminar regime and the fuel used in these flames is also natural gas. The frequencies that we have examined in these flames are 25 and 40 Hz, and these tests were... 

In the present work, the local Chemiluminescence method has been implemented on a laminar premixed propane-air flame. The goal of this work is to achieve a system capable of measuring the intensity of Chemiluminescent radiations of CH* and OH* radicals locally and with high spatial and temporal accuracy. For this purpose, a setup has been designed and developed. In order to achieve high spatial accuracy for local measurements, a Cassegrain lens has been designed and built, which has the ability to collect light from a cylindrical control volume with a cross-sectional diameter of 58 μm and a depth of 3.4 mm. An optical system for dividing and filtering light based on wavelength has also been... 

The airport terminal is difficult to plan and design due to the different components and the intricate complexity of its parts. At the airport terminal, we face a queue system which simulation is always a good way to analyze. In addition, computer simulation using modern softwares with the capability to model different types of systems, including the airport terminal, while being less realistic than analytical models, is less costly than operational Exercise.In this study, a supportive approach for better and specific management of Iranian airport terminal buildings with discrete-event simulation is proposed, considering the need for managing the airport terminals building in the country and... 

Limited water resources in Iran have made dams an important part of the country’s infrastructure. As a result of the large number of in-progress and expected dam projects in the country, consideration of sustainability factors during planning, construction and operation phases of dam projects can create significant economical, social and environmental impacts in the long term. To come up with an inclusive sustainable development, new sustainability assessment approaches seek for sustainable development at the entire project’s life-cycle; they are looking for sustainable development at all design, construction, operation, maintenance and even demolition phases. In this research we have... 

In this study, growth of MWCNTs in form of thin film and powder for hydrogen storage was investigated. Different analytical techniques including SEM, TEM, STA, XRD, XPS, BET, BJH and Raman spectroscopy were applied to characterize the samples. The results showed that substrate, catalyst thickness and type of catalyst are influenced in yield of the growth, structure and quality of MWCNTs. The study has also indicated that MWCNTs grown on Fe-Pd bimetallic catalyst with 25-75 proportion had the highest growth yield. Moreover, decreasing of the growth temperature from 970 to 920 oC produced single-walled carbon nanotubes (SWCNTs) with high quality (IG/ID = 15.8) and low growth yield.... 

Polycarbonate (PC) is known as one of the engineering plastics with remarkable mechanical properties, but the application of this polymer is limited due to its high notch sensitivity. Blending polycarbonate with other polymers such as acrylonitrile butadiene styrene (ABS) is a method to resolve this disadvantage. PC/ABS blends are commonly used in automotive industry, electrical and electronic devices. As PC and ABS are not completely miscible, a variety of compatibilizers are used to achieve a suitable microstructure and high engineering properties. Considering crucial applications of PC/ABS blends, different flame retardants are also used to reduce the flammability. These flame retardants... 

Today, base lead piezoelectrics are the center of attention due to their very good electrical properties, and low cost of production. Among these ceramics are PZT which is a combination of Pb(ZrxTi1-x)O3 and PCN which is a combination of Pb(CoxNb1-x)O3. PZT is a normal piezoelectric whose dielectric properties would be improved if relaxor is added. PCN is ferroelectric with perovskite structure and curie temperature -27℃ which is known as a relaxor with high constant dielectric properties. In this research, adding PCN to PZT was done by sol-gel seeding method. Calcination at a temperature of 900℃ was causing the creation of single-phase perovskite powder. After that, conventional sintering... 

The aim of this study is to investigate the effect of Copper oxide on the microstructure, properties, and grain growth kinetic in Tin oxide- Based varistors. Copper oxide was mixed in Tin oxide with different concentration, including 0, 0.1, 0.25, 0.5, and 1 mol% and the samples were sintered at 1250, 1300, and 1350 oC. Then, phase and microstructural characterization was investigated and consequently, electrical properties were evaluated. According to results, Copper Oxide with forming the liquid phase through the sintering process, accelerated grain growth. It was found that, by increasing concentration of CuO, mean grain size was increased from 2.6 µm in 1250 oC and 5 hours to 17.1 µm... 

Recently, Polypropylene has been extensively used in a variety of applications in the polymer industry, but its quite low stiffness and toughness limit this polyolefin’s application in the engineering functions; thus, the market of polymer blend and composite manufacturing has grown noticeably in the last few years. In the current project, short Flax fibers are used in order to reinforce the PP matrix. Firstly, Flax fibers were washed with the gentle and harsh condition during the alkalization process, then the optimized alkalization condition was determined through comparison of results from X-ray Diffraction (XRD ), Attenuated Total Reflectance FTIR (ATR-FTIR) and microscopic surface... 

Nowadays, most of businesses are becoming computer-based. This trend causes the organizations to become more vulnerable to internal and external threats. Internal threats are done through insiders. Insiders unlike outsiders have capabilities which aid them to easily carry out their illicit activities. Unfortunately, most of research in computer security has focused on the outsider threats, whereas the most damaging is the result of insiders’ illicit activities.This dissertation addresses three primary necessities of the research in the area of insider threat: a consistent definition of insider threat, a classification of types of insider threats, and a classification of vulnerabilities which... 

Integrity of closed-loop systems with integral action control is characterized by using a series of successively more difficult to obtain conditions: Integral Stabilizable (IS), Integral Controllable (IC), Integral Controllable with Integrity (ICI), and Decentralized Integral Controllability (DIC). The IS condition requires that for a Linear Time-Invariant (LTI) finitedimensional (FD) plant, G(s), one finds a stabilizing decentralized controller with integral action. For G(s) to be IC, in addition to being IS, one should be able to reduce the gain of
all control loops by the same factor from a finite value to (but not including) zero without introducing instabilities. ICI requires that... 

This project focuses on the Tennessee East-man challange problem(TEP) and the impact of setpoint changes and controller tunning on plant performance and profitability. TE has four major units. it is an unstable system due to the reaction within the reactor and a recycle streamcausing snow ball effect. As a result the control of this system is not easy. The study has been conducted along two main directions. First, selecting the optimal values for the setpoints and applying them in the simulation. secondly, try to find better parameter for controller in simulation. Simulation is based on working of Ricker. In TEP like the other multivariable systems, it is ameanable to use a centralized... 

Intraction in multi input multi output (MIMO) system makes control of these systems difficult.There are two ways to control such systems; Centralized and Decentralized control. One way in which a centralized controller is designed is using a precompensator. With application of the pre-compensator, the MIMO sytem is decoupled into several SISO systems and one can control these seperatly. Almost all previews methods for the design of pre-compensator assume that the model of the plant containsno uncertainties.In this thesis a new method is proposed which takes into account model uncertaintes in the design of the pre-compensator.The form of the uncertainties considred an interval-parametric  

Decentralized control is a typical method for the design of industrial MIMO control systems. However, in most multivariable systems, the existence of large interactions limit the achievable performance of such controllers. In the Nyquist Array design method proposed by Rosenbrock, the system interactions can be reduced using a precompensator, such that a decentralized controller may be used with acceptable performance. A well designed pre-compensator will effectively decouple the system and the multivariable systems may be considered as a set of SISO systems. It is therefore obvious that the key element in the Nyquist Array design method is the design of the pre-compensator. There are two...