Sharif Digital Repository

By displacing oil in porous media with other fluid, different mechanisms of fluid displacing occur. The importance of understanding the trapping mechanisms like pore body filling is irrefutable. Pore body filling mechanism with a coordination number of four has different events like I0, I1, I2 and I3. Previous studies showed that the event of I0 occurs when the pore is only filled by a compressible non-wetting phase, but this study showed that this event could also occur by an incompressible non-wetting phase. Trapping mechanisms can be examined in a glass micro-model. In this research, a glass micro-model with three different patterns was used. Results showed that at two spots of the... 

The hybrid rocket motor is a kind of chemical propulsion system that has been recently given serious attention by various industries and research centers. The relative simplicity, safety and low cost of this motor, in comparison with other chemical propulsion motors, are the most important reasons for such interest. Moreover, throttle-ability and thrust variability on demand are additional advantages of this type of motor. In this paper, the result of an internal ballistic simulation of hybrid rocket motor in a zero-dimensional form is presented. Further to validate the code, an experimental setup was designed and manufactured. The simulation results are compared with the experimental data... 

Hydroxyapatite (HA) is the most substantial mineral constituent of a bone which displays splendid biocompatibility and bioactivity properties. Nevertheless, its mechanical property is not utmost appropriate for a bone substitution. Therefore, a composite consist of HA and a biodegradable polymer is usually prepared to generate an apt bone scaffold. In the present work polycaprolactone (PCL) was employed as a matrix and hydroxyapatite nanorods were used as a reinforcement element of the composite. HA/PCL nanocomposites were synthesized by a new in-situ sol-gel process using low cost chemicals. Chemical and physical characteristics of the nanocomposite were studied by X-ray diffraction (XRD),... 

The present study was aimed at developing a model to optimize the sizing parameters and farm layout of wind turbines according to the wind resource and economic aspects. The proposed model, including aerodynamic, economic and optimization sub-models, is used to achieve minimum levelized cost of electricity. The blade element momentum theory is utilized for aerodynamic modeling of pitch-regulated horizontal axis wind turbines. Also, a comprehensive cost model including capital costs of all turbine components is considered. An iterative approach is used to develop the optimization model. The modeling results are presented for three potential regions in Iran: Khaf, Ahar and Manjil. The optimum... 

Hydroxyapatite (HA) is the most substantial mineral constituent of a bone which has been extensively used in medicine as implantable materials, owing to its good biocompatibility, bioactivity high osteoconductive, and/or osteoinductive properties. Nevertheless, its mechanical property is not utmost appropriate for a bone substitution. Therefore, a composite consist of HA and a biodegradable polymer is usually prepared to generate an apt bone scaffold. In the present work polycaprolactone (PCL), a newly remarkable biocompatible and biodegradable polymer, was employed as a matrix and hydroxyapatite nanoparticles were used as a reinforcement element of the composite. HA/PCL nanocomposites were... 

Proteins possess a variety of nucleophiles, which can carry out different reactions in the functioning cells. Proteins endogenously and synthetically can be modified through their nucleophilic sites. The roles of these chemical modifications have not been completely revealed. These modifications can alter the protein folding process. Protein folding directly affects the function of proteins. If an error in protein folding occurs, it may cause protein malfunction leading to several neurodegenerative disorders such as Alzheimer's and Parkinson's. In this study, Hen Egg White Lysozyme (HEWL) and bovine insulin, as model proteins for studying the amyloid formation, were covalently attached with... 

In this study, 40% CaO/γ-Al2O3 catalyst was used for biodiesel production from corn oil. A transesterification reaction was done for 5h at a temperature of 65°C in the presence of corn oil, methanol (methanol to oil molar ratio of 12:1), and CaO/γ-Al2O3 catalyst (0.06g/g (6wt%)). Catalyst used in this study was synthesized using the sol-gel method. In this method, two parameters of gelation temperature and nitric acid concentration were used as variables in the catalyst synthesis step, and experiments were designed using central composite design (CCD). The results indicate that the optimal point is achieved at a gelation temperature of 70°C and... 

The performance of an HTPB/N2O hybrid motor was experimentally investigated. A hybrid motor was designed and manufactured in a laboratory with the purpose of studying the effects of various parameters on the motor's performance, including fuel regression rate and specific impulse. A series of tests were conducted to find a correlation between the fuel regression rate and the oxidizer's mass flux. The effects of chamber's pressure on the regression rate as well as other performance parameters were investigated. While the burning rate did not change dramatically, both the efficiency and ISP of the motor increased. The local fuel regression rate and the fuel port were also calculated. In... 

An Al-5 wt% Ti composite was fabricated via powder metallurgy and hot extrusion from initial pure Al and Ti powders. The effect of subsequent heat treatment at 600 °C for different time intervals on microstructure and mechanical properties was investigated. XRD and EDS analyses showed the in-situ formation of Al3Ti intermetallic. SEM micrographs demonstrated the formation of core-shell structured particles in Al matrix for composites heat treated up to moderate heating times (4 h). Generation of voids and pores in the heat treated composites was considered as a result of the Kirkendall effect. Mechanical properties of composites were studied by hardness and tensile testing methods at room... 

An Al-5 wt% Ti composite was fabricated via powder metallurgy technique and hot extrusion. The produced composite samples were heat-treated subsequently at 600 °C for various time durations of 0, 4 and 10 h to achieve different volume fractions of the intermetallic Al3Ti phase. Pure aluminum sample was produced as a benchmark specimen to be compared to the composite samples. SEM studies were used to investigate the microstructure of the composite samples, and it was revealed that core-shell structured particles were formed in the composite heat-treated for 4 h. Triple point bending test was performed on the single edge notched beam specimens of the heat-treated Al-5 wt% Ti composite and the... 

The method for modeling switching converters plays a key role in real-time simulators. Associate discrete circuit (ADC) modeling technique is a commonly used method for modeling the switching converter. However, the optimal selection of the ADC-based switch model parameters has great importance in the accuracy of the real-time simulator. In this paper, the design of a real-time simulator for a switching power converter has been done, in which a novel method for detecting optimum values of the switch model parameters has been expressed. Particle swarm optimization (PSO) algorithm is used to find these optimum values using state-space analysis of the modeled circuit in the z-domain. The... 

Battery energy systems are playing significant roles in smart homes, e.g., absorbing the uncertainty of solar energy from root-top photovoltaic, supplying energy during a power outage, and responding to dynamic electricity prices. For the safe and economic operation of batteries, an optimal battery-management system (BMS) is required. One of the most important features of a BMS is state-of-charge (SoC) estimation. This article presents a robust central-difference Kalman filter (CDKF) method for the SoC estimation of on-site lithium-ion batteries in smart homes. The state-space equations of the battery are derived based on the equivalent circuit model. The battery model includes two RC... 

Typical non-hydrocarbon gases, which have been utilized in miscible and immiscible processes, are carbon dioxide and nitrogen. These gases are usually injected separately and have been rarely utilized together as a tertiary recovery process. In this article, the authors have experimentally focused on sequential carbon dioxide and nitrogen gas injection as a new enhanced oil recovery method. The periodic injections of carbon dioxide and nitrogen have been repeated for six injection pore volumes. Sensitivity analysis of injection pressure, injection volume, and injection rate has also been investigated in core flood experiments. The experimental results have revealed that a sequential miscible... 

The Per Tone equalization algorithm is a novel discrete multitone (DMT) equalization method with practical applications in subscriber digital loop systems. Unlike time domain DMT equalizers (TEQ), which equalize all DMT tones in a combined fashion, the Per Tone equalizer equalizes each tone separately. In this paper, the performance and complexity of this technique is investigated and compared with that of other TEQs. Furthermore, the behavior of this technique in different simulation conditions, such as over different standard CSA loops and in the presence of additive white Gaussian noise with variable power spectral density level and near end crosstalk (NEXT), is studied and compared with... 

This paper presents a methodology for implementing of the mathematical model of H-Bridge converter in an FPGA-based Real-Time simulator. Furthermore, it introduces a new method for choosing parameters of the Associate Discrete Circuit (ADC) model of semiconductor switches. The ADC-based model allows obtaining a fixed topology irrespective of switches states for the power electronic converters in the digital simulation. Backward-Euler based discretized state space matrix (SSM) of the circuit used for ADC parameter. Choosing appropriate switch parameter is based on 1) reducing the distance of SSM eigenvalues from origin in z-Plane to reduce settling-Time of system response; and 2) reducing the... 

In this work we evaluate the interaction of high intense laser beam with a steepened density profile. During laser interaction with underdense plasma by freely expanding plasma regime, modification of density profile is possible. In this paper we have investigated the ultra short laser pulse interaction with nonisothermal and collisionless plasma. We consider self-focusing as an effective nonlinear phenomenon that tends to increase when the laser power is more than critical rate. By leading the expanded plasma to a preferred location near to critical density, laser reflection is obtained, so the density profile will be locally steepened. The electromagnetic fields are evaluated in this new... 

Structures of tapered geometry are customarily used in a variety of applications. The analysis of such structures is usually made through finite element method using traditional beam, shell or brick elements. In this paper, a new tapered superelement is presented that lends itself to modeling revolving geometries under lateral, axial and torsional loads. The presented tapered superelement has 16 nodes. The performance of this element under static and dynamic loading and in rotating condition is examined. It is shown that this element yields accurate results with higher computational efficiency compared to conventional elements. Furthermore, it is verified that a single tapered superelement... 

Hepcidin is a peptide hormone that plays an important role in iron metabolism. We have produced a recombinant mouse hepcidin-1 by using baculovirus expression system. Its expression yield was 25 μg/ml when cell culture media were supplemented with a protease inhibitor cocktail. The recombinant mouse hepcidin-1 and synthetic human hepcidin-25 had similar effects on reducing ferroportin expression in J774A cell line and in peritoneal macrophages. However, synthetic human hepcidin-25 was more efficient than recombinant mouse hepcidin-1 in reducing iron concentration in blood circulation (p < 0.01)  

In this paper, we present design and implementation of TCvisor, a new trusted hypervisor. To this end, TCvisor provides a secure storage with different isolated view per user by using para-passthrough and combined key. In this regard, virtualization technology of processors has been used for complete isolation from operating system. By combining TPM base key, user's password and geo function key, TCvisor provides a secure storage in an environment with split data. We have applied feature wise security analysis TCvisor's secure storage from software system layers point then we have compared performance of TCvisor to selected candidates of existing layers  

This paper introduces advanced SVC. Advanced SVC has been simulated with regard to reactive power and unbalancy compensation. Then, a new space has been chosen for state equation based on combination of d-q and real space to positive - negative. By decoupling of active, reactive powers and positive, negative sequences and using decoupling circuit, the facility of each sequence control, by control circuit will be provided independently. After advanced SVC modeling, the load - which is electrification railway system - will be simulated. So a sample of electric locomotive in Iran has been investigated and simulated. By using the load model, the advanced SVC has been used for compensation of...