Sharif Digital Repository

St52 was heated at 745°C for 70 minutes and then quenched into a salt bath at 400°C. To obtain different volume fraction of bainite and martensite with constant volume fraction of ferrite (67%), samples were quenched into water after different times. Presence of three phases of ferrite, bainite and martensite was proved by optical microscope and hardness test. Different volume fractions were measured by image analysis. Optical microscope results showed that with increasing of martensite up to 9.4%, morphology of martensite is a uniform distribution of small and sphere particles. These samples then were cold worked at various degrees. Tensile test and hardness test show that increasing the... 

Due to its extensive applications in imaging, data security, medication, etc., Terahertz has attaracted an ever-inceasing attention. Design and implementation of Terahertz sources and circuits as waveguide, filters, etc. in this band have attracted attention. The unique elec-tric characteristics of graphene, like showing plasmonic characteristics in Terahertz frequency band, made this recently recognized matter a promising one to build super-integrated plas-monic circuits in Terahertz band. In this text, the first section represents an introduction for a number of graphene waveguides as well as studying the effective refractive index method to analyze graphene waveguides. Due to the small... 

Impulsive waves generated by landslides and slamming on horizontal cylindrical members of a jacket are examples of phenomena which cause damage on structures and endanger human life. Importance of wave generated by land slide was a motivation for a large number of analytical, experimental and numerical studies. Recently, numerical methods that do not use a grid have been used in order simulation and prediction of damage in these sophisticated hydrodynamic problems. One of these modern methods is Smoothed Particle Hydrodynamics (SPH). A general model based on Smoothed Particle Hydrodynamics, “SPHysics”, was developed jointly by researchers to promote the development and use of SPH within the... 

Aiming to improve the extraction performance of wind energy has led to the noticeable increase of the structural dimensions in the modern wind turbines. The larger blade with more flexibility experiences large structural deformation even under nominal operational loading, so the nonlinear modeling and analysis of these structures have become as important subject of the recent wind turbine researches. In this dissertation, the geometrical exact model of the rotating wind turbine blade under the effects of the tower tip's motion, and also the operational loading comprising the aerodynamic and gravitational loadings is presented. In this way, the geometrical exact beam formulation is developed... 

Condition monitoring and fault detection is an important way to provide economy in both time and costs. Many methods are developed for this purpose. Vibration analysis is one of the most important ways in this field. In this thesis, fault detection of mechanical rotary systems with nonlinear and non-stationary nature has been developed by use of empirical mode decomposition (EMD) and Hilbert transform. Firstly the measured signal is transformed into some intrinsic mode functions (IMF’s) by EMD, and then the Hilbert transform is implemented on each IMF. With Hilbert transform, the instantaneous frequency of system and then the mean frequency are obtained. Mean frequency is a key definition... 

So far, investigations have shown that open dielectric resonator antennas (DRAs) offer several advantages at microwave and millimeter wave frequencies. These advantages include small size, large impedance bandwidth, high radiation efficiency, ease of manufacturing and simple feed-coupling mechanisms (such as probe coupling, aperture coupling or proximity coupling to micro-strip lines). Most microwave ferrites have dielectric constants in the desirable range and they can be used in place of dielectric materials. Such ferrite resonator antennas (FRAs) offer a potential advantage in that their permeability tensor can be controlled by applying an external magnetic field. Up to now and by the... 

Internet video networks have already attracted millions of Internet users, and Internet video is one of the fast growing Internet services. The peer-to-peer (P2P) network is an efficient solution to supporting large scale video streaming on the Internet. P2P networks can deliver live multimedia content to millions of users with low cost at any time, and at anywhere they want. In this thesis, we investigate solutions to enhancing the performance of the unstructured mesh-based. Locality awareness or network proximity is one of the essential characteristics of P2P networks. In live P2P video streaming we face to some challenges like bandwidth heterogeneity of peers, and peer churn. In the P2P... 

The failure in rolling element bearings as an important part of rotary machine can lead to machine breakdown.Consequently, bearings can reduce reliability of these components and therefore a maintenance strategy is essential to keep reliability in a desired level. The first and primitive strategy is called breakdown or unplanned maintenance. The next is preventive or planned maintenance. In this scheme, maintenance is done after a specified time period irrespective of machine health status. Out of place maintenance is the disadvantage of preventive maintenance. The most effective generation of maintenance strategy is condition based maintenance (CBM) which suggests maintenance decision based... 

Rotor contact with a stationary element of a rotating machine and the subsequent rubbing at the contact area is a serious malfunction that may lead to the machine’s catastrophic failure. In the past decades, many studies have been done on the rubbing phenomena, its different regimes and its various consequences on the machine performance and safety. However, most of them have used a simple model to investigate the rubbing interaction between the rotor and the stator. This simple model consists of the Jeffcott rotor, as a model for the real rotors, and a rigid annular block surrounding the rotor, as a model for the real stators. The objective of this thesis is to build an algorithm to... 

The effect of Vibration on the human body is considered as one of the limitations in design and use of HSCs at high speeds. One way to reduce the effect of vibration on the human body is to isolate deck vibrations from the crew by means of seat suspension system. This thesis has studied the effect of using an MR damper on the performance of seat suspension in vibration reduction. In fact, employing MR dampers in seat suspension systems enables us to change their damping. Using an MR damper makes it possible to control seat suspension by semi active control strategies. In this work, a number of proposed mathematical models of an MR damper were studied for numerical analysis and the most... 

Today as various electronic and telecommunication devices like cell phones and PDAs are being popularized, MMIC technology is gaining a significant importance. One of the priorities of this technology is trying to miniaturize these popular devices. But reducing size of passive microwave components used in these devices requires microwave wavelength to decrease.Components fabricated by conventional deposition techniques aren’t thick enough to reduce the wavelength, so permittivities much higher than those of conventional dielectrics could be a possible solution. Artificial dielectric layers (ADL) can provide such high permittivities.So utilizing these layers can possibly reduce the size of... 

So far, investigations have shown that open dielectricresonator antennas(DRAs) offer several advantages at microwaveand millimeter wave frequencies and make them appropriate in low directional-gain applications . These advantages include small size, large impedance bandwidth, high radiation efficiency, ease of manufacturing and simple feed-coupling mechanisms (such as probe coupling, aperture coupling or proximity coupling to micro-strip lines). Most microwave ferrites have dielectric constants in the desirable range and they can be used in place of dielectric materials. Such ferrite resonator antennas (FRAs) offer a potential advantage inthat their permeability tensor can be controlled by... 

Torsional vibration is undeniable in rotary systems, and it is more important in gearbox because it is the main cause of failure and noise. In this research The stiffness and damping between teeth are considered and mean stiffness between teeths are calculated by using material, contact ratio,and geometrical parameters. Transfer matrix method is used for obtaining natural frequencies and mode shapes.
In this thesis, effects of geometrical parameters of gears, backlash value, harmonic and constant torque on rattle noise show that increase in backlash, amplitude and frequency of excitation, magnify the power of impacts, also the time of rattle phenomenon and number of impacts decrease by... 

In wireless communication systems increasing the gain of antennas is seminal to increase in coverage and data transmission rate, and reducing the possible errors. One of the main factors for improving the antenna gain is matching the polarizations of the transmitter and the receiver antennas. Towards this end, both the transmitter and the receiver antennas should have the same axial ratio, specific direction and polarizations. As far as the flexibility of the direction angle between the transmitter and the receiver is concerned, the so-called circular polarization is preferred do the linear polarization. The antennas with circular polarizations are prominently utilized in satellites,...