Sharif Digital Repository

The method for modeling switching converters plays a key role in real-time simulators. Associate discrete circuit (ADC) modeling technique is a commonly used method for modeling the switching converter. However, the optimal selection of the ADC-based switch model parameters has great importance in the accuracy of the real-time simulator. In this paper, the design of a real-time simulator for a switching power converter has been done, in which a novel method for detecting optimum values of the switch model parameters has been expressed. Particle swarm optimization (PSO) algorithm is used to find these optimum values using state-space analysis of the modeled circuit in the z-domain. The... 

This paper presents a methodology for implementing of the mathematical model of H-Bridge converter in an FPGA-based Real-Time simulator. Furthermore, it introduces a new method for choosing parameters of the Associate Discrete Circuit (ADC) model of semiconductor switches. The ADC-based model allows obtaining a fixed topology irrespective of switches states for the power electronic converters in the digital simulation. Backward-Euler based discretized state space matrix (SSM) of the circuit used for ADC parameter. Choosing appropriate switch parameter is based on 1) reducing the distance of SSM eigenvalues from origin in z-Plane to reduce settling-Time of system response; and 2) reducing the... 

This paper deals with a straightforward procedure for modeling and controller design of an electric vehicle with a fully-active hybrid energy storage system comprising the battery and supercapacitor for real-time energy management. Firstly, the dynamic models of the energy storage systems, the average model of bi-directional dc-dc converters, the static model of the electric motor, and the vehicle dynamics are obtained. Then, a classical low-pass filter is employed as a supervisory control to define the reference signals of the low- level controllers, which aim to regulate the input currents of the bi-directional dc-dc converters. Besides, the dc-dc converters efficiency factor, depending on... 

Due to its unique properties, helium has wide application in different industries and scientific fields, which has turned it into a strategic material. Helium liquefaction plants include wide temperature range from 300 k to 4.2 k, so these plants have high energy consumption. A lot of studies have done to optimize the operation of these cycles. In this research, an exergy analysis is performed for a liquid helium production plant. The optimal performance of 3 and 4 stage cycles is extracted using parametric study and the results are compared with those of Collins dual-expander cycle. The results show that by increasing the number of cooling stages, not only the compressor optimum discharge... 

Due to its unique properties, helium has wide application in different industries and scientific fields, which has turned it into a strategic material. Helium liquefaction plants include wide temperature range from 300 k to 4.2 k, so these plants have high energy consumption. A lot of studies have done to optimize the operation of these cycles. In this research, an exergy analysis is performed for a liquid helium production plant. The optimal performance of 3 and 4 stage cycles is extracted using parametric study and the results are compared with those of Collins dual-expander cycle. The results show that by increasing the number of cooling stages, not only the compressor optimum discharge... 

In this study, a cryogenic distillation column has been designed and simulated via a computer code based on the theta method of convergence. The required thermodynamic properties are determined from the enhanced predictive Peng-Robinson (E-PPR 78) equation of state which has a good accuracy in predicting the corresponding thermodynamic properties of natural gas components. The combined code of distillation column/equation of state has been verified with that of another study. In the present study, the results are achieved by the constant molar over-flow and inclusion of energy equations assumptions. In order to have more accuracy in the results, the energy equations were considered in the... 

Carbon nanotube (CNT)-doped TiO2 thin films with various CNT contents were synthesized by sol-gel method for visible light photoinactivation of Escherichia coli bacteria. Post annealing of the CNT-doped TiO2 thin films at 450 °C resulted in anatase TiO2 and formation of Ti-C and Ti-O-C carbonaceous bonds in the film. By increasing the CNT content, the thin films could further inactivate the bacteria in the dark. Meanwhile, as the CNT content increased from zero to 40 wt% the effective optical band gap energy of the CNT-doped TiO2 thin films annealed at 450 °C decreased from 3.2-3.3 to less than ∼2.8 eV providing light absorption in the visible region. Concerning this, visible light... 

Two kinds of carbon coated and uncoated 316L stainless steel are studied to use as bipolar plates in fuel cells. The results show that the conductive amorphous carbon film has a low corrosion rate in simulated PEMFC environment. Rather long term potentiostatic tests and SEM investigations indicate that carbon thin films can be a good candidate to use as bipolar plate  

The adhesion of hydroxyapatite (HA) as a coating for the AZ91 magnesium alloy substrate can be improved by using the sputtering method and an intermediate layer, such as ZrN. In this study, HA coatings were applied on ZrN intermediate layers at a temperature of 300 °C for 180, 240, 300, 360, and 420 min by ion beam sputtering. A profilometer device was used to study the HA coating thickness, which changed from 2 μm for the 180-min deposition to 4.7 μm for 420-min deposition. The grazing incidence X-ray diffraction analysis method and the Williamson–Hall analysis were used for structural investigation. As the deposition time increased, the crystalline size increased from 50 nm to 690 nm.... 

This paper introduces a straightforward technique for parameters estimation of the RC equivalent circuit model of a battery cell with the main aim of its implementation in real-time digital simulator frameworks. The RC model parameters are precisely estimated by the analysis of the battery cell voltage curve during relaxation time using the pulse current test. In this regard, Least-squares fitting is used to mitigate the error of the battery cell voltage response, which leads to a precise estimation of the RC model parameters as a function of the state-of-charge. Exponential and Gaussian functions are utilized to define the resistances and the capacitances in the RC model respectively based... 

This paper compares the dynamic and static models of a Lithium-ion battery pack with its electrochemical model as energy storage of an electric vehicle according to the environmental protection agency drive cycles. The dynamic model or the RC equivalent circuit includes a voltage source and double parallel resistor and capacitor networks which are connected in series. The static model includes a voltage source and resistors. Given drive cycles, these models are compared in terms of the battery voltage, state-of-charge, and power loss in an electric vehicle in MapleSim software. Although the state-of-charge and power loss of both models are identical to each other, actually the terminal... 

The pyramid network is one of the most important interconnection topologies used as hardware architecture or software data structure. It has a combined tree-mesh structure making it suitable for solving many parallel problems and applications. This paper proposes a parallel algorithm for Hermite Interpolation on the Pyramid network which has at least N nodes. The proposed algorithm has 3 phases: initialization, main, and final. The algorithm is optimal with a time complexity of O(N) for an N-point interpolation. ©2007 IEEE  

Control of unstable non-minimum-phase delayed stochastic processes is a challenging problem. In this work based on the Diophantine equation and using pole-placement technique, a discrete control scheme for such processes has been proposed. Robust stability of the suggested control structure has been shown. Advantages of the proposed scheme over the existing algorithms have been shown through computer simulations. It has been shown that performance of the proposed scheme for handling model mismatch and colored noise is superior to the previous work proposed in the literature  

This article indicates the accurate method for load level calculation to solve the power flow problem when capacitor reactive power is involved. Using the correct method causes some changes in the results and conclusion stated in the discussed paper on optimal reconfiguration and capacitor placement in radial distribution systems  

Capacitor placement/setting is one of the main means for loss reduction and voltage profile improvement in distribution systems. If capacitor placement is meant, the objective function will be the cost of energy losses besides the capacitors costs in a specified period of time. Here, reconfiguration can be used as a strategy to reform the base configuration of the distribution network in order to place the capacitors more efficiently with lower costs. On the other hand, if capacitors are already available in a network, optimum capacitors setting and network reconfiguration should be performed for power loss minimization. In this paper both power loss minimization and capacitor placement cost... 

This paper reports on the diversity of languages displayed in the linguistic landscape of Julfa district, a largely Armenian dominated area, in the city of Isfahan in Iran. The data included a corpus of 323 photographs taken from the top-down and bottom-up signage in this quarter of the city. Ethnographic fieldwork was also conducted to reach a deeper understanding of the linguistic landscape in Julfa. The results of the analyses indicated that Julfa, as home to Armenians in diaspora and also a luxurious neighborhood frequented by more modern strata of the Isfahani society, is occupied more noticeably with Persian and English language and to a lesser extent with Armenian language. The...