Sharif Digital Repository

The present study was aimed at developing a model to optimize the sizing parameters and farm layout of wind turbines according to the wind resource and economic aspects. The proposed model, including aerodynamic, economic and optimization sub-models, is used to achieve minimum levelized cost of electricity. The blade element momentum theory is utilized for aerodynamic modeling of pitch-regulated horizontal axis wind turbines. Also, a comprehensive cost model including capital costs of all turbine components is considered. An iterative approach is used to develop the optimization model. The modeling results are presented for three potential regions in Iran: Khaf, Ahar and Manjil. The optimum... 

The objective of the present study is the development of an optimization model for identifying the best configuration of renewable-based integrated energy systems. The system includes a combination of renewable energy systems such as wind, solar, hydropower and hydrogen production, storage facilities and conventional fossil-fuel generators. The developed tool consists of various modules where water heating assumes the utilization of waste energy as an option. Furthermore, the application, which is demonstrated for a case study in Tehran, has been considered. The power exchange with the distribution network and injection of hydrogen produced from excess renewable sources into gas network are... 

The present study was aimed at performance and energy analysis of a hybrid wind-hydrogen power system. Such system consists of wind turbines, batteries for the short time energy storage, electrolyzer, fuel cell and hydrogen tank for long time energy storage. The proposed configuration is used to supply energy demand of a region with discrete seasonal wind speed regime. Temporary wind energy profiles restrict using batteries for electricity storage as they lose much electrical stored energy for the long time. Based on direct wind turbine usage, batteries and hydrogen storage, different energy supply strategies are introduced and analyzed to power the household electricity demand. The energy... 

In this study, hybrid renewable energy system based on wind/electrolyzer/PEM fuel cell are conceptually modeled, and also, exergy and energy analysis are performed. The energy and exergy flows are investigated by the proposed model for Khaf region-Iran with high average wind speed and monsoon. Exergy and energy analysis framework is made based on thermodynamic, electro-chemical and mechanical model of the different component of hybrid system. Also, the effects of various operating parameters in exergy efficiency are calculated. The results show an optimum wind speed where the exergy efficiency and power coefficient is at maximum level, and also, when the ambient temperature start to be... 

Control of unstable non-minimum-phase delayed stochastic processes is a challenging problem. In this work based on the Diophantine equation and using pole-placement technique, a discrete control scheme for such processes has been proposed. Robust stability of the suggested control structure has been shown. Advantages of the proposed scheme over the existing algorithms have been shown through computer simulations. It has been shown that performance of the proposed scheme for handling model mismatch and colored noise is superior to the previous work proposed in the literature  

This article indicates the accurate method for load level calculation to solve the power flow problem when capacitor reactive power is involved. Using the correct method causes some changes in the results and conclusion stated in the discussed paper on optimal reconfiguration and capacitor placement in radial distribution systems  

Capacitor placement/setting is one of the main means for loss reduction and voltage profile improvement in distribution systems. If capacitor placement is meant, the objective function will be the cost of energy losses besides the capacitors costs in a specified period of time. Here, reconfiguration can be used as a strategy to reform the base configuration of the distribution network in order to place the capacitors more efficiently with lower costs. On the other hand, if capacitors are already available in a network, optimum capacitors setting and network reconfiguration should be performed for power loss minimization. In this paper both power loss minimization and capacitor placement cost... 

This paper reports on the diversity of languages displayed in the linguistic landscape of Julfa district, a largely Armenian dominated area, in the city of Isfahan in Iran. The data included a corpus of 323 photographs taken from the top-down and bottom-up signage in this quarter of the city. Ethnographic fieldwork was also conducted to reach a deeper understanding of the linguistic landscape in Julfa. The results of the analyses indicated that Julfa, as home to Armenians in diaspora and also a luxurious neighborhood frequented by more modern strata of the Isfahani society, is occupied more noticeably with Persian and English language and to a lesser extent with Armenian language. The... 

Background: In recent years, Advanced Driving Assistance Systems (ADAS) have been significantly progressed, opening novel horizons in reducing traffic accidents. Driver gender can be an affecting factor in the utilization of these systems. The purpose of this study is to review articles examining the effect of gender on the use of ADAS technologies. Methods: This systematic review was conducted in Scopus, Science Direct and PubMed databases using defined key-words in 2018. The retrieved articles were managed and screened through PRISMA-P protocol using EndNote X7 software. The extracted variables were divided into three categories of reaction, behavior, and outcome and also the relevant... 

Structures of tapered geometry are customarily used in a variety of applications. The analysis of such structures is usually made through finite element method using traditional beam, shell or brick elements. In this paper, a new tapered superelement is presented that lends itself to modeling revolving geometries under lateral, axial and torsional loads. The presented tapered superelement has 16 nodes. The performance of this element under static and dynamic loading and in rotating condition is examined. It is shown that this element yields accurate results with higher computational efficiency compared to conventional elements. Furthermore, it is verified that a single tapered superelement... 

The hybrid rocket motor is a kind of chemical propulsion system that has been recently given serious attention by various industries and research centers. The relative simplicity, safety and low cost of this motor, in comparison with other chemical propulsion motors, are the most important reasons for such interest. Moreover, throttle-ability and thrust variability on demand are additional advantages of this type of motor. In this paper, the result of an internal ballistic simulation of hybrid rocket motor in a zero-dimensional form is presented. Further to validate the code, an experimental setup was designed and manufactured. The simulation results are compared with the experimental data... 

Hydroxyapatite (HA) is the most substantial mineral constituent of a bone which displays splendid biocompatibility and bioactivity properties. Nevertheless, its mechanical property is not utmost appropriate for a bone substitution. Therefore, a composite consist of HA and a biodegradable polymer is usually prepared to generate an apt bone scaffold. In the present work polycaprolactone (PCL) was employed as a matrix and hydroxyapatite nanorods were used as a reinforcement element of the composite. HA/PCL nanocomposites were synthesized by a new in-situ sol-gel process using low cost chemicals. Chemical and physical characteristics of the nanocomposite were studied by X-ray diffraction (XRD),... 

Hydroxyapatite (HA) is the most substantial mineral constituent of a bone which has been extensively used in medicine as implantable materials, owing to its good biocompatibility, bioactivity high osteoconductive, and/or osteoinductive properties. Nevertheless, its mechanical property is not utmost appropriate for a bone substitution. Therefore, a composite consist of HA and a biodegradable polymer is usually prepared to generate an apt bone scaffold. In the present work polycaprolactone (PCL), a newly remarkable biocompatible and biodegradable polymer, was employed as a matrix and hydroxyapatite nanoparticles were used as a reinforcement element of the composite. HA/PCL nanocomposites were... 

Modeling passengers' itinerary choice behavior helps in understanding the increasingly competitive airline market and in predicting air travel demand. Recently, investigation of the variation in passengers' preferences with regard to factors influencing their choice through estimation of the mixed multinomial logit model has received attention. An extended form of the model identifies sources of heterogeneity and consequently makes the choice models less restrictive in considering both systematic and random preference variation across individuals. This research investigates the existence of significant interactions between passengers' preference heterogeneity around the mean of random... 

Oscillatory behavior and transfer properties of relay feedback systems with a linear plant including a fractional-order integrator are studied in this paper. An expression for system response in the time domain is obtained by means of short memory principle, Poincare return map, and Mittag-Leffler functions. On the basis of this expression, the frequency of self-excited oscillations is approximated. In addition, the locus of perturbed relay system (LPRS) is derived to analyze the input-output properties of the relay system. The presented analysis is supported by a numerical example. Copyright © 2017 by ASME  

In this paper, an oscillatory condition is obtained for fractional order relay feedback systems. This condition is derived by time domain representation of the response of the fractional order relay feedback system on the basis of the Mittag-Leffler functions. Also, using an inequality, which has been recently proved for fractional derivative of convex Lyapunov functions, an invariant set is found for the under-study fractional order relay feedback system. The obtained results are validated by numerical examples  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

This paper presents a methodology for implementing of the mathematical model of H-Bridge converter in an FPGA-based Real-Time simulator. Furthermore, it introduces a new method for choosing parameters of the Associate Discrete Circuit (ADC) model of semiconductor switches. The ADC-based model allows obtaining a fixed topology irrespective of switches states for the power electronic converters in the digital simulation. Backward-Euler based discretized state space matrix (SSM) of the circuit used for ADC parameter. Choosing appropriate switch parameter is based on 1) reducing the distance of SSM eigenvalues from origin in z-Plane to reduce settling-Time of system response; and 2) reducing the...