Sharif Digital Repository

Abstract : Vertically aligned carbon nanotube (CNT) arrays were synthesized by thermal chemical vapor deposition (CVD) on stainless steel substrates coated by cobalt nanoparticles as catalyst. Morphological and elemental analyses conducted by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) revealed that bamboo-like CNTs were blocked by Co nanoparticles at the tips. The fabricated nanotubes underwent functionalization by electrochemical oxidation in sulfuric acid, and the subsequent structural studies, as well as Fourier transform infrared (FTIR) spectroscopy confirmed that the tips of functionalized CNTs were opened while oxygenated functional groups were... 

In this paper, hydrogen management in refineries is examined considering a new perspective to optimize refinery costs. In order to minimize the total annual cost in refineries a mixed-integer non-linear programming (MINLP) model has been developed. Retrofitting the hydrogen network and determining the hydrogen surplus capacity of refineries are the main outputs of the proposed model. Then, to utilize this surplus capacity and increase the profitability of refineries, surplus hydrogen is used to produce electricity and ammonia. The results of a case study showed that retrofitting of the hydrogen network can save 12% in the consumption of fresh hydrogen from hydrogen plants. After retrofitting... 

Orthogonal frequency division multiplexing (OFDM) is used in many wireless communication. The important drawback of this modulation is its high peak-to-average power ratio (PAPR). In this paper, a new modulation scheme of constant-envelope OFDM (CE-OFDM) is proposed. This scheme uses a combination of OFDM, quantizer and continuous phase modulation (CPM) to achieves 0 dB PAPR. The statistical signatures of signals, based on system parameters such as the length of discrete Fourier transform (DFT) and the number of quantization levels are presented. There are two sources of noise in proposed CE-OFDM scheme: quantization noise and channel noise. The theoretical analysis of these noises is... 

This paper proposes a new medium-access control (MAC) protocol designed for wireless sensor networks. A wireless sensor network is an array of large number of sensors interconnected by a multi-hop ad-hoc network. The fundamental objective for sensor network is low-power consumption while latency is usually less important. This characteristic of sensor network motivates different MAC laver design from the conventional wireless network to reduce power consumption. In this paper novel algorithm based on distributed mediation device (DMD) protocol has been introduced that utilized distributed node scheduling strategy to dramatically increase energy saving principally in intermediate devices... 

Flooding technique is widely using to manipulate sensor network essential activities such as synchronization, data gathering, network query and in-network information processing. Reliable and low latency data broadcasting is the primary goal in design of appropriate quality of service aware flooding algorithm. This paper proposes a new error-rate adaptive reliable data flooding strategy. Energy consumption which it the main limitation in sensor network, has been considered in optimal presented scheme. Also the tradeoff between reliability, power consumption and latency has been cared to achieve the finest devise. The simulation results have shown significant enhancement in quality of data... 

A new air shower experiment of the Alborz Observatory, Alborz-I, located at the Sharif University of Technology, Iran, will be constructed in near future. An area of about 30×40 m2 will be covered by 20 plastic scintillation detectors (each with an area of 50×50 cm2). A series of experiments have been performed to optimize the height of light enclosures of the detectors for this array and the results have been compared to an extended code simulation of these detectors. Operational parameters of the detector obtained by this code are cross checked by the Geant4 simulation. There is a good agreement between the extended-code and Geant4 simulations. We also present further discussions on the... 

Electrospinning of biopolymers has gained significant interest for the fabrication of fibrous mats for potential applications in tissue engineering, particularly for wound dressing and skin regeneration. In this study, for the first time, we report successful electrospinning of chitosan-based biopolymers containing bacterial cellulous (33 wt %) and medical grade nanodiamonds (MND) (3 nm; up to 3 wt %). Morphological studies by scanning electron microscopy showed that long and uniform fibers with controllable diameters from 80 to 170 nm were prepared. Introducing diamond nanoparticles facilitated the electrospinning process with a decrease in the size of fibers. Fourier transform infrared... 

This paper proposes a new medium-access control (MAC) protocol designed for wireless sensor networks. A wireless sensor network is an array of large number of sensors interconnected by a multi-hop ad-hoc network. The primary objective for the sensor network is achieving to low-power consumption while latency is usually less important compare to traditional wireless networks. This characteristic of sensor network motivates the design of new MAC layer so that power consumption is reduced. In this paper, a novel traffic-aware algorithm based on distributed node schedule management (DMD) protocol is introduced that utilizes distributed dynamic node scheduling strategy to dramatically increase... 

In the present article, α-Al2O3 nano powder was synthesized by a simple aqueous sol-gel method by using AlCl3 as precursor. It was shown that the gel calcined at 1000°C, 1100 °Cand 1200 °Cresulted in the formation of a crystalline ?-Al2O3 nano powder. In continue TEOS and saccharose was used to prepare SiO2 xerogels containing carbon nano particles. The conversion of the gel to β-SiC nano powders was accomplished by carbothermal reduction at 1500°Cfor 1 h in argon atmosphere. In second pace alumina matrix composites with nano particles of 5 vol% SiC were prepared with the addition of TiO 2 as sintering aid and densified by pressureless sintering method at 1600°Cand 1630°C for 2 h in nitrogen... 

This paper investigates the applicability of frequency-domain system identification technique to achieve the equivalent linear dynamics of an autonomous underwater vehicle for control design purposes. Frequency response analysis is performed on the nonlinear and coupled dynamics of the vehicle, utilizing the CIFER® software to extract a reduced-order model in the form of equivalent transfer functions. Advanced features such as chirp-z transform, composite window optimization, and conditioning are employed to achieve high quality and accurate frequency responses. A particular frequency-sweep input is implemented to the nonlinear simulation model to achieve pole-zero transfer functions for yaw...