Sharif Digital Repository

In this research, titanium dioxide (TiO2) ultra-thin films have been successfully obtained on lamina-glass substrates by thermal oxidation of DC magnetron sputtered titanium. The as-deposited and the annealed films have been characterized by different techniques. The X-ray diffraction (XRD) results revealed the amorphous structure of as-deposited titanium and anatase crystal structure for the annealed films. The atomic force microscopy (AFM) results showed that increasing the annealing temperature could lead to rougher and larger grain size in the films. Finally, the optical data and band-gap calculations of the films were obtained using the transmittance spectrum, indicating that... 

Porter's model of Competitive advantage of nations (named as Diamond Model) has been widely used and criticized as well, over recent two decades. On the other hand, non-mainstream economists have tried to propose new frameworks for industrial analysis, that among them, Sectoral Innovation System (SIS) is one of the most influential ones. After proposing an assessment framework, we use this framework to compare SIS and Porter's models and apply them to the case of second mobile operator in Iran. Briefly, SIS model sheds light on the innovation process and competence building and focuses on system failures that are of special importance in the context of developing countries, while Diamond... 

In this paper the structure of Maximum Likelihood (ML) CFAR for lognormal clutter is derived assuming that some reference samples are censored to avoid destructive effect of interfering targets. It is shown that under some acceptable approximations we will achieve in a simple structure for this detector which is suitable for real time processing. The proposed detector is compared with non censored ML CFAR (i.e. logt CFAR) via simulation. It is shown that while the proposed detector is a little weaker than logt CFAR in homogeneous clutter, in non homogeneous clutter it outperforms the logt CFAR  

Purpose: The main purpose of this study is to review the knowledge management literature from a content-related perspective using cluster analysis. Design/methodology/approach: A critical analysis of previous review articles in KM provided a conceptual framework with nine dimensions. A survey was then administered to 120 KM authors asking them to review which dimensions they considered in their own research. Findings: Three clusters of KM research were identified as follows: the socialization school, the collaboration school, and the codification school. Research limitations/implications: The study does not consider the dimension of strategic versus operational KM issues nor does it consider... 

Based on the code specifications, in moment-resisting frames the span-to-depth ratio has to be larger than a minimum value to make sure of adequate plastic hinging at beam-ends. This provision poses a restriction on the use of deep beams with short spans, especially for the framed-tube system in tall buildings. In this paper, a new energy dissipation method is introduced for moment-resisting frames by modifying the mid-span of the beam by two different methods, resulting in: (i) Perforated Shear Links (PSLs) and (ii) Slit Shear Links (SSLs). The links dissipate energy through shear yielding of the web, weakened by perforation or slitting, respectively. A thorough study is conducted on the... 

It is beyond dispute that technological change acts as a driver of economic growth. In developing countries where highly suffer from lack of this process, incremental innovation is considered as main source of technology capability building and development In moving toward this pass and to meet with time pressure of catching up, developing countries acquire the initial required knowledge base through technology absorption from outside sources; On the other hand as development is a lengthy process, it is important that the absorbed knowledge still has the potential of more advancement in future. Therefore a selection instrument with ability of assessing different knowledge base or... 

This paper presents a powerful application of genetic algorithm (GA) for the minimization of the total harmonic current distortion (THCD) in high-power induction motors fed by voltage source inverters, based on an approximate harmonic model. That is, having defined a desired fundamental output voltage, optimal pulse patterns (switching angles) are determined to produce the fundamental output voltage while minimizing the THCD. The complete results for the two cases of three and five switching instants in the first quarter period of pulse width modulation (PWM) waveform are presented. Presence of harmonics in the stator excitation leads to a pulsing-torque component. Considering the fact that... 

In project-based organizations, many practical cases show there is a considerable knowledge gap between project-level and organization level. To bridge such gap, organizations can exploit knowledge intensive human resources, new organizational structures and new information and communication technologies. But all these three dimensions could have trivial effect when there is no central attention toward the content of knowledge that is to be managed. In this paper, we postulated a three layer framework for this problem that its main contribution is that the content of knowledge is at the center of attention, while all other three dimensions of any knowledge management system (HR, Organization... 

Switched Reluctance Motors (SRMs) possess both simple structure and high speed operation, but they suffer from considerable vibration and acoustic noise. The significant vibration and acoustic noise reduction techniques are categorized in two groups: Drive based methods and geometrical design based group. The main challenge in both groups is reducing the acoustic noise and vibration without significant deterioration in other performance characteristics of the motor such as average torque and efficiency. In this paper a novel multi-stage SRM with skewed poles is proposed to significantly reduce vibration and acoustic noise in almost constant average torque and even higher efficiency. Design... 

The elastic behaviors of a two-axes dipole of wedge disclinations and an individual wedge disclination located inside the shell of a free standing core-shell nanowire is studied within the surface/interface elasticity theory. The corresponding boundary value problem is solved using complex potential functions, defined through modeling the disclination dipole by two finite walls of infinitesimal edge dislocations. The stress field, disclination strain energies and image forces acting on the disclinations, are calculated and studied in detail. It is shown that the stresses are rather inhomogeneous across the nanowire cross section, change their signs and reach local maxima and minima far from... 

One of the most significant parameters that the electronic designers are trying to increase, is the reliability or the effective lifetime of the circuit. For example the designers are always trying to achieve higher efficiency. One of the most important influence of the greater efficiency is the reduction of the thermal stress on the components, that leads to increase of the reliability. In this paper the reliability of two different industry-based structures as an AC/DC converter, have been compared. These circuits are from two different generations of power supplies in a particular industry, which the first introduced structure has greater efficiency due to soft switching. FIDES method has... 

An investigation of the kinetic and mechanism of CO hydrogenation reaction was performed on impregnated Co-Ni/Al2O3. Determination of kinetic parameters from the experiments was carried out in a micro fixed-bed reactor. Kinetic evaluations were performed under various operational conditions of T = 473–673 K, p = 1–14 bar, H2/CO = 1–3, and GHSV = 4,500 hr−1. Kinetic models and rate equations for CO consumption were obtained by using two main-type rate equations of Langmuir-Hinshelwood-Hougen-Watson (LHHW) and Eley-Rideal (ER). Estimation of various kinetic parameters was performed using a nonlinear regression method. According to the obtained experimental results and using statistical... 

This paper introduces a wavelet packet algorithm based on a new wavelet like filter created by a neural mass model in place of wavelet. The hypothesis is that the performance of an ERP based BCI system can be improved by choosing an optimal wavelet derived from underlying mechanism of ERPs. The wavelet packet transform has been chosen for its generalization in comparison to wavelet. We compared the performance of proposed algorithm with existing standard wavelets as Db4, Bior4.4 and Coif3 in wavelet packet platform. The results showed a lowest cross validation error for the new filter in classification of two different kinds of ERP datasets via a SVM classifier. © 2007 IEEE  

The purpose of this work is to decrease coupling effects of a tactical missile by designing a robust autopilot for its roll channel. In tactical STT missiles due to control strategy, in order to execute acceleration commands, roll angular velocity should be kept close to zero. Generally, in the design of autopilot for many of tactical missiles the inter influences of channels is neglected. However, three channels of the missile impact each other in different ways including kinematic, inertia and aerodynamic couplings. Aerodynamic coupling is a dominant in roll channel dynamics appearing as induced and control cross coupling roll moments. In this paper first the coupling terms are modeled... 

An efficient, green, novel and rapid vortex-assisted dispersive solid-phase extraction (VADSPE) technique was used for the preconcentration and determination of trace levels of Cu2+ followed by flame atomic absorption spectrometry. Graphene oxide (GO) was synthesized from graphite and then modified by pectic acid (poly-d-galacturonic acid, PA) to synthesize the pectic acid–graphene oxide (PA-GO) nanocomposite. The Fourier transform infrared spectrophotometry, field emission scanning electron microcopy, energy-dispersive X-ray spectroscopy and X-ray diffraction analysis were used to characterize the synthesized GO-PA nanocomposite. By using VADSPE technique, PA-GO was used as an adsorbent for... 

Consumption of fossil fuels in residential, industrial, and transportation sectors has a significant contribution to air pollution and high attributable premature deaths. To target specific strategies for reducing health effects, the anthropogenic sources and their contributions should be identified. This article provides an integrated modeling approach to evaluate the sector-specific contributions of different PM2.5 sources on air pollution and relevant health impacts. The dispersion of emissions from different sources is modeled by the American Meteorological Society/Environmental Protection Agency Regulatory Model (AERMOD), and the health impacts are estimated by the Environmental... 

Unwanted vibrations of vehicles are regarded as harmful threats to human health in biomechanical and psychophysical terms. Road roughness is considered as the main cause of unwanted vibrations of bus vehicles. Vertical seat vibrations were found via simulating a 10-Degree-Of-Freedom (10-DOF) model of an intercity bus vehicle under harmonic and random excitations caused by road roughness. To suppress undesirable vibrations, mass-spring-damper passive absorbers were proposed in a 13-Degree-Of- Freedom (13-DOF) model of the bus. Following the optimization of the characteristics of embedded passive absorbers under each seat and implementation of the designed absorbers, the vertical displacement... 

We investigate the problem of communicating three parameters in the absence of shared reference frame. We explore two methods in which the relative angles of spins are used to encode the parameters. In the first method we use three spins that carry the information in their relative angles while in the second method we use three disjoint spin-pairs and the information is sent through the relative angles of each individual pair. We show that in the first method, the information conveyed by each qubit is more than the second one, and that is while it requires fewer particles. © 2021 Elsevier B.V