Sharif Digital Repository

A novel, magnetic nanocarrier was successfully synthesized through a facile and economical producer in which Fe3O4 magnetic nanoparticles were coated by starch-g-poly (methyl methacrylate-co-PEG-acrylamide). The surface of nanocarrier was then modified by hydrazine to preparation of a pH-responsive carrier. The resulted nanocarrier was applied for delivery of doxorubicin (DOX) as an effective anti-cancer drug. DOX was reacted with hydrazine linkage on the surface of nanocarrier to form hydrazone bond. Due to the presence of numerous hydrazine groups on the surface of magnetic nanocarrier large amounts of DOX was loaded onto the carrier (327 mg g−1). © 2016 The Korean Society of Industrial... 

A novel heterogeneous catalyst has been synthesized based on the distillation-precipitation-polymerization of methyl acrylate onto modified magnetic nanoparticles followed by the amidation of the methyl ester groups using N,N-dimethylethylenediamine. The resulting poly(dimethylaminoethyl acrylamide) coated magnetic nanoparticles (MNP@PDMA) catalyst was characterized using an array of sophisticated analytical techniques, including FT-IR, TGA, SEM, TEM, CHN, vibrating sample magnetometer (VSM), and XRD analysis. The resulting heterogeneous base catalyst allowed the performance of a domino Knoevenagel condensation/Michael addition/cycloaddition reaction toward the synthesis of... 

Anchoring of copper sulfate in layered poly(imidazole-imidazolium) coated magnetic nanoparticles provided a highly stable, active, reusable, high loading, and green catalyst for the click synthesis of 1,2,3-triazoles via a one-pot cycloaddition of alkyl halide, azide, and alkyne (Cu-A3C). The catalyst was characterized by FTIR, TGA, TEM, SEM, XRD, EDAX, VSM and AAS. High selectivity, broad diversity of alkyl/benzyl bromide/chloride and alkyl/aryl terminal alkynes, and good to excellent yields of products were obtained using 0.7 mol% catalyst. The catalyst was readily recovered and reused up to 6 times without significant loss of activity  

During construction of one of the Sahand cooling towers due to slip forming performance some imperfections were raised mostly between elevation of +30 and +40 meter. It was evaluated that some points of the shell should be repaired. In constructing the cooling tower from elevation +40 to +60 meter these imperfections were removed and the cooling tower was constructed with no problem until the elevation +130 meter. In this paper reasons of generation of geometric imperfections in Sahand cooling tower are clearly shown and possible ways for preventing them are discussed. Applied repairing method for Sahand cooling tower is explained in detail. Geometrical imperfections of the constructed... 

A heterogeneous magnetic copper catalyst was prepared via anchoring of copper sulfate onto multi-layered poly(2-dimethylaminoethyl acrylamide)-coated magnetic nanoparticles and was characterized using various techniques. The catalyst was found to be active, effective and selective for one-pot three-component reaction of alkyl halide, sodium azide and alkyne, known as copper-catalyzed click synthesis of 1,2,3-triazoles. As little as 0.3 mol% of catalyst was found to be effective under the optimum conditions. The catalyst could also be recycled and reused up to seven times without significant loss of activity. Thermal stability, high loading level of copper on catalyst, broad diversity of... 

A magnetic nanocomposite was prepared by entrapment of Fe3O4 nanoparticles into the cross-linked ionic liquid/epoxy type polymer. The resulting support was used for covalent immobilization of cellulase through the reaction with epoxy groups. The ionic surface of the support improved the adsorption of enzyme, and a large amount of enzyme (106.1 mg/g) was loaded onto the support surface. The effect of the presence of ionic monomer and covalent binding of enzyme was also investigated. The structure of support was characterized by various instruments such as FT-IR, TGA, VSM, XRD, TEM, SEM, and DLS. The activity and stability of immobilized cellulase were investigated in the prepared support. The... 

Depending on the type of dopant metal, many kinds of zircon based pigments are produced and blue vanadium pigment is the most important one of them. In this study, blue zircon ceramic pigments were synthesized from intermediate product, resulting from decomposition of zircon sand with NaOH. In this regard, various amounts of sulfuric acid, water, NH4VO3 as colorant, NaF as mineralizer and extra quartz were added to the prepared Na 2ZrSiO5. Role of quartz was to omit the repercussions of presence of free zirconia in the composition. The main objective of this work is to assess various reactions at different temperatures during blue pigment synthesis. Phase analysis was done by X ray... 

In the endurance time (ET) method, structures are subjected to a specially designed intensifying ground acceleration function and their performance is judged based on their response at various excitation levels. A range of equivalent intensities can be covered in a single numerical or experimental simulation, thus significantly reducing the computational demand as compared to full nonlinear response-history analyses. The applied excitation intensity at various times has been correlated with those of the scaled ground motions. Response spectra of seven ground motions on stiff soil were used to produce intensifying acceleration functions that at each time window produce a response spectrum... 

In the present study, the fluid characteristics of triangular turbulent jet flow are considered experimentally and numericafly. The results of spatially developed three- dimensional jet, issued from an equilateral triangular nozzle are presented. The jet is discharged to both bounded and unbounded domains. Because of the wind tunnel set up restrictions, the experimental study has done just for the bounded domain. The hot-wire anemometry is used for experimental study. A numerical method employing control volume approach with collocated grid arrangement which couples the velocity and pressure fields with SIMPLEC algorithm is introduced to discrete the governing equations of fluid flow. The... 

A heterogeneous tungstate-based catalyst has been prepared for selective oxidation of sulfides to sulfoxides in the presence of 30% H2O2. The catalyst was prepared via immobilization of high amounts of WO4 2− onto the cross-linked poly(ammonium ethyl acrylamide) coated magnetic nanoparticles (MNP). FT-IR, TEM, TGA, VSM, XRD, EDX, and CHN analysis were used for characterization of catalyst. Variety of sulfides successfully converted to the related sulfoxides using 1 mol% of catalyst at room temperature in high yields. The catalyst was easily recovered and reused up to 6 times without loss of activity  

A novel bi-functional polymeric catalyst was synthesized by immobilization of tungstate anions onto the nitrogen rich poly(ionic liquid)/magnetic nanocomposite. The resulting catalyst has two types of catalytic sites: (i) immobilized WO4 anions with bis-imidazolium ionic liquid cation for selective oxidation of alcohols and (ii) basic amine groups for Knoevenagel condensation between produced aldehyde and malononitrile. Due to the polymeric nature of the catalyst, large amounts of tungstate and basic nitrogen groups were presented on the solid surface which led to a decrease in the applied catalyst mass for catalytic reaction. High catalytic activity and excellent selectivity of catalyst in... 

Incremental launching is a widespread bridge erection technique which may offer many advantages for bridge designers. Since internal forces of deck vary perpetually during construction stages, simulation and modeling of the bridge behavior, for each step of launching, are tedious and time consuming tasks. The problem becomes much more complicated in construction progression. Considering other load cases such as support settlements or temperature effects makes the problem more intricate. Therefore, modeling of construction stages entails a reliable, simple, economical and fast algorithmic solution. In this paper, a new Finite Element (FE) model for study on static behavior of bridges during...