Investigation of the Effect of Slip Length on the Electrokinetic Behavior of Conical-Shaped Nanochannels

, M.Sc. Thesis Sharif University of Technology Roostaei, Mahmoud (Author) ; Mohammadi, Ali Asghar (Supervisor)

Abstract

Conical nanochannels have desirable electrokinetic properties due to asymmetry,including ionic current rectification and ion selectivity. The present study numerically addressed the effect of slip length on the ionic current rectification and ion selectivity in conical-shaped electrolyte-loaded nanochannels with and without a coated polyelectrolyte layer. The electrolyte was considered a salted incompressible Newtonian fluid. The polyelectrolyte layer was also modeled as a rigid and charged porous solid saturated with a salted Newtonian fluid. The electrolyte-polyelectrolyte layer interface was modeled as a surface, considering ion partitioning with distinct physical properties across the...

Emergency Medical Service Centers Location

, M.Sc. Thesis Sharif University of Technology Roostaei, Ali (Author) ; Eshghi, Kourosh (Supervisor)

Abstract

The Emergency Medical Services (EMS) have a major role in decreasing the mortality rate and reducing the non-reversible effects of injuries by on time care to patients and transporting them to hospitals if it is needed. Since there is an important goal directly related to the human life, any research or study to improve the performance of EMS is highly recommended. One of the most important parameters in evaluation of EMS is to measure the coverage time of a demand. The locations of EMS play substantial role to decrease the response time. So the locations of EMS stations are very important especially in large and populated cities. Mainly, there are three problems that EMS managers should...

Emergence of Hopf bifurcation in an extended SIR dynamic

, Article PLoS ONE ; Volume 17, Issue 10 October , 2022 ; 19326203 (ISSN) Roostaei, A ; Barzegar, H ; Ghanbarnejad, F ; Sharif University of Technology

Public Library of Science 2022

Abstract

In this paper, the original SIR model is improved by considering a new compartment, representing the hospitalization of critical cases. A system of differential equations with four blocks is developed to analyze the treatment of severe cases in an Intensive Care Unit (ICU). The outgoing rate of the infected individuals who survive is divided into nI and bI/1+b where the second term represents the transition rate of critical cases that are hospitalized in ICU. The findings demonstrate the existence of forward, backward and Hopf bifurcations in various ranges of parameters. © 2022 Roostaei et al. This is an open access article distributed under the terms of the Creative Commons Attribution...

Study on Biodiesel Production Using Engineered Lipases

, M.Sc. Thesis Sharif University of Technology Char Roostaei, Hamzeh (Author) ; Kazemeini, Mohammad (Supervisor)

Abstract

Biodiesel has drawn the attention of many researches to itself as a replacing source for crude oil, recently. Transesterification is one of the most popular methods used for biodiesel production. Enzyme transesterification is a more simple method in comparison with acidic or basic transesterification. However, the high price and low yield of enzyme transesterification has caused many obstacles in its application. Enzyme engineering has gained much attention as a way to improve enzyme performance. In this thesis, biodiesel production by a native enzyme named Bacillus thermocatenulatus, and two engineered-enzymes is studied. First, effective parameters and variables in biodiesel production by...

Effects of a multi-component virtual reality program on motor skills and functional postural control in children with hemiplegic cerebral palsy

, Article Heliyon ; Volume 9, Issue 9 , 2023 ; 24058440 (ISSN) Roostaei, M ; Babaee, M ; Alavian, S ; Jafari, N ; Rayegani, M ; Behzadipour, S ; Sharif University of Technology

Elsevier Ltd 2023

Abstract

Background: Pediatric neurorehabilitation has recently employed virtual reality (VR) technologies as a platform to design and implement novel modalities. Aims: To evaluate the feasibility of a multi-component VR-based program on motor skills and functional postural control for children with hemiplegic cerebral palsy (HCP). Methods: A single-case-experimental design was conducted on eight children with HCP (12.33 ± 4.71 years and GMFCS= II, I). The VR-based program consisted of 3 sessions per week for four weeks. Timed Up and Go (TUG) test, Functional Reach Test (FRT), Pediatric Balance Scale (PBS), Activities Scale for Kids (ASK), ABILHAND-Kids, and Box and Block Test (BBT) were used to...

Numerical Modeling and Experimental Investigation of the Efficiency of the Laser-assisted Machining for Ceramics

, Ph.D. Dissertation Sharif University of Technology Roostaei, Hossein (Author) ; Movahhedy, Mohammad Reza (Supervisor) ; Shoja Razavi, Reza (Co-Supervisor)

Abstract

Laser-assisted machining is nowadays considered as an alternative to conventional machining processes including ceramics grinding, which has provided the basis for extensive experimental and numerical studies in this field. Since the main difference between laser-assisted machining and conventional machining is in the presence of lasers, the main purpose of this study was to investigate the effects of laser on the laser assisted machining process. In this regard, in the first step the process of laser heating to the ceramic workpiece has been studied experimentally and numerically by finite element method. The material used in this research is a slip cast fused silica ceramic. The...

Forecasting Electricity Consumption in a Metropolis Using Machine Learning Algorithms

, M.Sc. Thesis Sharif University of Technology Roostaei, Mohammad (Author) ; Taghizadeh Manzari, Mehrdad (Supervisor) ; Aryanpour, Masoud (Supervisor)

Abstract

In smart grids, energy data such as electricity and gas consumption are recorded via smart sensors installed in buildings. Analyzing energy consumption patterns and classifying users based on their consumption behavior can assist policymakers in supply management and urban-scale energy control. This study proposes an unsupervised approach to classify energy consumers according to their monthly consumption patterns. The primary objective of the clustering is to group households with similar usage behaviors, facilitating a more effective analysis of electricity consumption at an urban scale. The K-means clustering algorithm is employed to classify households into K clusters based on their...

Analysis of Heat Transfer in Laser Assisted Machining of Slip Cast Fused Silica Ceramics

, Article 7th CIRP Conference on High Performance Cutting, HPC 2016, 31 May 2016 through 2 June 2016 ; Volume 46 , 2016 , Pages 571-574 ; 22128271 (ISSN) Roostaei, H ; Movahhedy, M. R ; Ihlefeldt S ; Wertheim R ; Hochmuth C ; Putz M ; Sharif University of Technology

Elsevier 2016

Abstract

Machining of ceramics often involves many challenges due to their high hardness, brittleness, and low thermal properties. Laser assisted machining (LAM) is a promising technology for improving the machinability of hard-to-cut materials. In this work, laser assisted machining of slip cast fused silica (SCFS) ceramics is investigated by presenting a numerical thermal analysis of laser effects on material behaviour. A transient three-dimensional heat transfer analysis for laser assisted turning of SCFS is performed using finite element method. Temperature distributions in SCFS cylindrical specimens are obtained. Experimental results are provided to validate the numerical results

Technical English for mechanical engineers

, Book Alemi, Minoo ; Meghdari,Ali

Sharif University Press 2014

Abstract

Local educational institutions produce in-house English for Specific Purpose (ESP) materials according to the curriculum policies designated and developed by the Ministry of Higher Education In Iran. To this end, this book aims to be used in the Iranian setting at the tertiary level for undergraduate students majoring in Mechanical Engineering. Moreover, the style of English usage in this ESP textbook is American.
Regarding the content of the textbook, it has both thematic organizations in which the topics are relevant and includes sufficient treatment of the target language areas necessary for the students. The principle organizing approach of this textbook is theme-based. In addition,...

Feedback control of the neuro-musculoskeletal system in a forward dynamics simulation of stair locomotion [electronic resource]

, Article Proc. of IMechE Part H: Journal of Engineering in Medicine ; 2009, Vol. 223, No. 6, pp. 663-675 Journal of NeuroEngineering and Rehabilitation ; Volume 11, Issue 1, 30 April 2014, Article number 78 Selk Ghafari, A. (Ali) ; Meghdari, Ali ; Vossough, Gholam Reza ; Sharif University of Technology

Abstract

The aim of this study is to employ feedback control loops to provide a stable forward dynamics simulation of human movement under repeated position constraint conditions in the environment, particularly during stair climbing. A ten-degrees-of-freedom skeletal model containing 18 Hill-type musculotendon actuators per leg was employed to simulate the model in the sagittal plane. The postural tracking and obstacle avoidance were provided by the proportional—integral—derivative controller according to the modulation of the time rate change of the joint kinematics. The stability of the model was maintained by controlling the velocity of the body's centre of mass according to the desired centre of...

Design and Construction of a Soft Actuated Exoskeleton for Hand Rehabilitation of Stroke Patients

, M.Sc. Thesis Sharif University of Technology Razavi Zadehgan, Ali Akbar (Author) ; Ghafari, Ali (Supervisor) ; Meghdari, Ali (Supervisor)

Abstract

The main goal of this thesis is the design and development of a rehabilitation device for helping patients “to improve blood circulation” & retain and recover their abilities if possible that were lost during the stroke or a accident like that (my research in karaj/iran shows that it is possible by just movement of the specific body part). The focus is on hand in this thesis because Injuries to the hand are common and can be very debilitating since our hands are our primary means for interacting with our world. For rehabilitation in case of human hand there are several practices that should be done for patients either in home or in a rehabilitation center, time and money that is supposed to...

Silica chloride/wet SiO2 as a novel heterogeneous system for the deprotection of acetals under mild conditions [electronic resource]

, Article Phosphorus, Sulfur, and Silicon and the Related Elements ; Volume 178:2667-2670, Issue 12, 2003 Mirjalili, B. F. (BiBi Fatemeh) ; Pourjavadi, Ali ; Zolfigol, Mohammad Ali ; Bamoniri, Abdolhamid

Abstract

A combination of silica chloride and wet SiO2 was used as an effective deacetalizating agent for the conversion of acetals to their corresponding carbonyl derivatives under mild and heterogeneous condition

Earthquake Branch

, M.Sc. Thesis Sharif University of Technology Bagher Shemirani, Ali Reza (Author) ; Bakhshi, Ali (Supervisor)

Abstract

In the past few decades, shaking tables are widely used to evaluate system response of structures under seismic excitations. These devices are used without any fundamental research performed on a shaking table system as an entity model. In most of these studies for simplicity, it is assumed that there exist no considerable vibration and displacement around the shaking tables, and no attention is paid to the peripheral substances such as soil settled under the foundation.
In this thesis, result of ambient vibration test on shaking table system (solid deck, concrete foundation and soil layer) has been presented. Precise sensors known as low frequency and high accuracy accelerometers have...

Selective synthesis of conjugated enynes from α-arylalkynols using LiCl-Acidic Al2O3 under solvent-free conditions [electronic resource]

, Article Journal of Chemical Research ; Volume 2002, Number 8, 1 August 2002, pp. 378-380(3) Pourjavadi, A. (Ali) ; Bagheri Marandi, Gholam

Abstract

Free Content Selective synthesis of conjugated enynes from α-arylalkynols using LiCl-Acidic Al2O3 under solvent-free conditions

Selective preparation of fluorescent 1,8-naphthalimides using acidic alumina under microwave irradiation [electronic resource]

, Article Journal of Chemical Research ; 01/2001; 2001(11):485-487 Pourjavadi, A. (Ali) ; Bagheri Marandi, Gholam

Abstract

7H-benzimidazo[2,1-a]benz[de]isoquinolin-7-one compounds were prepared in a selective manner by reaction between o-phenylenediamines and appropriate 1,8-naphthalenedicarboxylic anhydrides using acidic alumina under microwave irradiation

Comparison between Performance of Stone Columns and RAPs from the Bearing Capacity and Settlement Reduction Viewpoints

, M.Sc. Thesis Sharif University of Technology Golestani Dariani, Ali Akbar (Author) ; Pak, Ali (Supervisor)

Abstract

Out of several ground improvement techniques available, stone columns have been widely used. This technique has been successfully applied to increase the bearing capacity and to reduce the settlement for foundation of structures like liquid storage tanks, earthen embankments, raft foundations, etc., where a relatively large settlement is permissible. This technique has, generally, been proven successful in increasing the stiffness of weak soils, upgrading their safe bearing capacity, and reducing their total and differential settlements, as well as speeding up their consolidation process. The beneficial effects of stone column installation in weak deposits is manifested in the form of...

Performance of Partially Filled Mini-Channels with Porous Media

, M.Sc. Thesis Sharif University of Technology Azimi, Adel (Author) ; Nouri, Ali (Supervisor) ; Moosavi, Ali (Co-Advisor)

Abstract

Laminar forced convection flow through a channel partially filled with a porous material was numerically studied in this thesis. The Navier-Stokes and Brinkman-Forchheimer equations were used to model the fluid flow in the free and porous regions, respectively. Coupling of the pressure and velocity fields was resolved using the SIMPLEC algorithm. The local thermal equilibrium was adopted in the energy equation. The effects of the thermal conductivity ratio, Darcy number, porosity, Reynolds number and height of the porous insert on velocity and temperature field were investigated. The results show that the flow behavior and its associated heat transfer are susceptible to the variation of the...

Improvement of Stability of Haptic Force Interaction with Virtual Environments Using a Haptic Interface with a Separate Tracker

, M.Sc. Thesis Sharif University of Technology Mashayekhi, Ahmad (Author) ; Meghdari, Ali (Supervisor) ; Nahvi, Ali (Supervisor)

Abstract

In the present study, a new version of haptic devices is presented in which user’s hand is in contact with the device just while collision with virtual surface. In this system, the position of user’s finger can be traced by using a camera and the haptic device follows user’s finger at the distance of about two centimeters. While the haptic device approaches to the virtual surface, gradually reduces its speed and stops about two centimeters distant of virtual plane. Then user’s hand collides with the haptic device which is static. Greater fidelity, transparency, more stability and also no need to large actuators are of the advantages of this system. In this project, first we present a new...

Simulation of the Biomolecule Imaging and Manipulation Via AFM by Molecular Dynamics Method

, M.Sc. Thesis Sharif University of Technology Kheiroddin, Mohsen (Author) ; Meghdari, Ali (Supervisor) ; Moosavi, Ali (Supervisor)

Abstract

In this thesis we try to find optimized parameters for imaging and manipulation of a biosample with AFM. For this we have prepared a numerous Molecular Dynamics simulation and find some reliable result. So, first we have focused on imaging process in Non contact mode (the less harmful mode). Then we headed into the manipulation process. The main problem about manipulating a biosample is the environment. In imaging section, the process of imaging a biomolecule by AFM is modeled using molecular dynamics simulations. Since the large normal force exerted by the tip on the biosample in contact and tapping modes may damage the sample structure and produce irreversible deformation, the non-contact...

Characterzing Variation of Small Strain Shear Modulus of Unsaturated Sand During Hydraulic Hysteresis with Bender Elements

, M.Sc. Thesis Sharif University of Technology Shahbazan, Parisa (Author) ; Pak, Ali (Supervisor) ; Khosravi, Ali (Supervisor)

Abstract

Results of previous studies on silt and clay indicated that variations in the small strain shear modulus, Gmax, during drying had a non-linear increasing trend with matric suction with greater values upon wetting. However, due to different material properties and inter-particle forces, different behaviour in Gmax is expected for sand. Although considerable research has been devoted in recent years to characterize the behaviour of Gmax of sand during drying, rather less attention has been paid to the effect of hydraulic hysteresis on Gmax and its variations during wetting. In the study presented herein, an effort was made to characterize the variation of Gmax for specimens of sand during...