Loading...
Search for: roshan--razieh
0.14 seconds

    , M.Sc. Thesis Sharif University of Technology Razieh, Azad (Author) ; Farzaneh, Forouhar (Supervisor)
    Abstract
    In recent years due to the advances in semiconductor technology and the ability to implement small-scale manufacturing, communication at 60 GHz band receive more attention than ever has been. The use of this frequency band is not only about 7-9 GHz unlicensed broadband access provided, but getting smaller devices make it possible to use multiple antennas at the transmitter and receiver, and thus taking advantage of multiple input – multiple output systems. Antennas used in these systems should have features such as small size , low weight, high gain and bandwidth and also they should keep their high efficiency and gainat high frequency range (about a few GHz ). To achieve these features... 

    Risk Action Plans’ Cost Optimization by Considering Risks’ Interdependency

    , M.Sc. Thesis Sharif University of Technology Roshan, Razieh (Author) ; Shadrokh, Shahram (Supervisor)
    Abstract
    Risk management, one of the knowledge areas in project management, plays a key role in the success of projects in today’s unstable situation. The massive cost reduction achieved by risk management can manifest its importance even more in huge construction projects in gas and oil industry such as developments of power plants and petrochemical complexes. In this research, the effect of considering the correlation between risks and consequently the effect of risk action plans on other risks in their execution cost reductions has been demonstrated. A questionnaire has been designed, many experts have been interviewed, and using statistical methods, the risks’ interdependencies have been... 

    Developing New Methods for Determining the Compressive Strength of Concrete

    , M.Sc. Thesis Sharif University of Technology Roshan, Parvin (Author) ; Khonsari, Vahid (Supervisor)
    Abstract
    Believing that the strength obtained from the standard 150300 mm2 cylindrical specimens, introduced by the ACI, cannot be a proper representative of what concrete experiences as part of a structure under loading, in this project an attempt was made to develop new methods for testing concrete specimens to find their strength. In order to avoid making new molds and to use standard 150300 mm2 molds, various innovative measures, proposed by the supervisor of this project, were used to work out the strength of tested concretes. While the results obtained from limited number of tests carried out in this work did not show much difference between the results of the standard ACI test with those of... 

    Design and Preparation of a Persian Semantic Corpus Using Abstract Meaning Representation

    , M.Sc. Thesis Sharif University of Technology Takhshid, Reza (Author) ; Bahrani, Mohammad (Supervisor) ; Shojaie, Razieh (Supervisor)
    Abstract
    To keep in line with the day to day advancements in the fields of computational linguistics and natural language processing, and the growing attention of researchers to semantic processing, this thesis presents the design and preparation of a Persian semantic corpus using Abstract Meaning Representation (AMR). This semantic representation pairs each sentence with a single rooted, acyclic, directed graph, which is human and computer readable. Moreover, this representation paves the way for the creation of large semantic corpora. In order to bring such benefits to Persian, in this thesis we present solutions for representing Persian sentences in the framework of AMR. Moreover, a corpus of 150... 

    Ezafe Recognition Using Dependency Parsing

    , M.Sc. Thesis Sharif University of Technology Nassajian, Minoo (Author) ; Bahrani, Mohammad (Supervisor) ; Shojaei, Razieh (Co-Supervisor)
    Abstract
    Ezafe is regarded as one of the most controversial and challenging issues in different Persian Language Processing (NLP) fields. It is recognized and pronounced but usually not written. So, this results in a high degree of ambiguity in Persian texts. Dependency grammar plays a significant role in optimization problems. So, to recognize the position of Ezafe in a sentence, this grammar is used in this current study. This method helps speed up computer operations and use low memory. Within this framework, first we take a close look at Ezafe distribution in Persian text. We use Uppsala Persian Dependency Corpus (2015) to analyze parsed sentences. The Ezafe constructions under study include... 

    A Semantic Valency Lexicon for Persian Predicates and Visualization of their Relations

    , M.Sc. Thesis Sharif University of Technology Salimifar, Saeedeh (Author) ; Khosravi Zadeh, Parvaneh (Supervisor) ; Shojaei, Razieh (Supervisor)
    Abstract
    The highest and most difficult layer of Natural Language Processing, is the understanding of meaning. As a result, lexicons and annotated corpora are of the utmost importance in this area. However, the lack of such semantic resources, especially in Abstract Meaning Representation (AMR), is one of the main issues in this field for Persian Language. This work by modeling PropBank, a semantic valency lexicon for English predicates, is the first step towards building such lexicons for Persian Language with the focus on AMR. Thus, a guideline describing how to annotate the Persian predicates is provided which first evaluates the common structures between the two languages and then focuses on the... 

    Persian Causative/Inchoative Alternation from an LFG Perspective

    , M.Sc. Thesis Sharif University of Technology Jamshidi, Naser (Author) ; Khosravizadeh, Parvaneh (Supervisor) ; Shojaee, Razieh (Supervisor)
    Abstract
    This study attempts to describe and analyze Persian speakers’ linguistic knowledge of different types of causative and inchoative constructions within the framework of Lexical Functional Grammar (LFG). In order to do so, different studies on Persian causative alternations within theories other than LFG as well as causative alternations in other languages within LFG are reviewed. Next, different types of causative constructions are categorized conceptually and structurally after they are extracted from Bijankhan corpus (2005). Then they are analyzed syntactically and semantically. In this regard, we represent syntactic and semantic structures based on LFG as a monostratal theory. After that,... 

    Persian Compound Verb Database with the Verbal Element: “Shodan”

    , M.Sc. Thesis Sharif University of Technology Hashemnejad, Zeinab (Author) ; Khosravizadeh, Parvaneh (Supervisor) ; Shojaie, Razieh (Supervisor)
    Abstract
    Compound verbs (CVs) and its components, have been widely discussed in previous linguistics' researches as one of the most important and fundamental constructions of Persian language. Nevertheless most of the arguments and assumptions in those researches align with each other and studying CVs from another aspect with a different viewpoint has not been considered very much in order to solve nodes and issues in this area. We have endeavored in this thesis to review and criticize the portrayed definitions of the CVs, reconsider this construction and the syntactical and semantical roles of verbal and non-verbal elements in this combination from another point of view, and revise the previous... 

    Fuzzy Fractional Order PID Design

    , M.Sc. Thesis Sharif University of Technology Mohammadian Roshan, Yaser (Author) ; Sadati, Naser (Supervisor)
    Abstract
    In this thesis a novel Fuzzy Fractional Order Controller (FFOPID) is presented. This controller is designed by the means of the combination of a fuzzy system and a fractional order PID. Fractional controllers, especially fractional PIDs, shows their performance in control systems after the advent of fractional calculus. Fractional PID has better flexibility according to the classic PID. As the real control systems are nonlinear actually, so solving the control problem needs a nonlinear controller. Therefore, a fuzzy system is used in this thesis, in order to adapt the controller parameters with different operating points of the system. Fuzzy system design needs the optimal values for... 

    RANS simulations of the stepped duct effect on the performance of ducted wind turbine

    , Article Journal of Wind Engineering and Industrial Aerodynamics ; Volume 145 , October , 2015 , Pages 270-279 ; 01676105 (ISSN) Zabihzade Roshan, S ; Alimirzazadeh, S ; Rad, M ; Sharif University of Technology
    Elsevier  2015
    Abstract
    With the rise in oil price and population growth, renewable energies are assumed to be the main source of energies for the next generation. Wind as a natural, eco-friendly and renewable source of energy has been at the center of concentration for decades. Recently there has been some ideas regarding the self-regulating urban wind turbines. Researchers have shown that a proper enclosure increases the wind velocity and therefore more torques can be exerted on the rotors, therefore more power can be generated. These enclosures are light and cheap, therefore they are applicable and effective. In the present study, an enclosure was modified to increase the exerted torque with implementing a step... 

    Recognition and the Nature of Self-consciousness in Fichte and Hegel

    , M.Sc. Thesis Sharif University of Technology Shokrollahnia Roshan, Majid (Author) ; Abazari, Arash (Supervisor)
    Abstract
    For both Fichte and Hegel, self-consciousness is an intersubjective concept; that is, for them, self-consciousness is necessarily constituted between, at least, two subjects. In Foundations of Natural Right, Fichte introduces summons and recognition as necessary conditions of self-consciousness, without which, i.e. an other who is calling upon the subject, the subject cannot be conscious at all. Hegel, in Phenomenology of Spirit, also says self-consciousness is desire which is satisfied only in another (self-) consciousness. Based on these ideas, I try to show that self-consciousness can be defined as having the both in view; the self (I) and the other (not-I), at the same time. In this... 

    Design, Manufacture and Flight Dynamics Analysis of A Handlaunched Solar UAV

    , M.Sc. Thesis Sharif University of Technology Khanipour Roshan, Alireza (Author) ; Banazadeh, Afshin (Supervisor)
    Abstract
    Hand-launched UAVs are type of unmanned aerial vehicles that due to transportability and geometric specification, are operationally valuable and worthy. reconnaissance & surveillance (aerial mapping, aerial filming, inspection, border protection); health care (blood transport, body organ transport, medicine delivery); agriculture (farm monitoring, fertilization, cloud seeding); payload delivery (envelopes posting); network covering (internet supply, telecommunication relay); crisis management (remote area medical) are some of typical applications and missions of this type of aircrafts. These UAVs have almost low altitude short endurance (below 5000 ft. and less than 2 hrs.). To extend their... 

    Unsteady RANS simulation of a surface piercing propeller in oblique flow

    , Article Applied Ocean Research ; Volume 56 , 2016 , Pages 79-91 ; 01411187 (ISSN) Alimirzazadeh, S ; Zabihzade Roshan, S ; Seif, M. S ; Sharif University of Technology
    Elsevier Ltd  2016
    Abstract
    Conventional propellers might undergo severe cavitation at high speeds and this phenomenon not only affects the efficiency of the propeller, but also may result in serious damages in propulsion system. Due to their special geometries, surface piercing propellers (SPPs) overcome this problem and achieve high efficiencies in high speeds. Therefore, SPPs are one of the popular propulsors for high-speed crafts. The present research is aimed to pursue SPP's performance in the off-design conditions. URANS method was used to study the performance of the 841-SPP (case with some available experimental results; Olofsson, 1996) in several immersion ratios (= 33%, 50%, 75% and 100%) and maneuvering... 

    Discovering and Improving the Processes of an Iranian Psychiatric Hospital Using Process Mining

    , M.Sc. Thesis Sharif University of Technology Roshan, Mohammad Amin (Author) ; Hassan Nayebi, Erfan (Supervisor)
    Abstract
    Providing quality hospital services depends on the efficient and correct implementation of processes. Therapeutic care processes are a set of activities that are carried out with the aim of diagnosing, treating and preventing any disease in order to improve and promote the patient's health. The purpose of this study is to use process mining techniques to discover and improve healthcare processes. The case study of this research is a psychiatric hospital in Shiraz. The approach implemented in this research consists of three main stages including data pre-processing, model discovery phase, and analysis phase. Three algorithms including Heuristic Miner, Inductive Miner, and ILP Miner were used... 

    Crystallization of hydroxyapatite during hydrothermal treatment on amorphous calcium phosphate layer coated by PEO technique

    , Article Ceramics International ; Volume 39, Issue 2 , 2013 , Pages 1793-1798 ; 02728842 (ISSN) Faghihi Sani, M. A ; Arbabi, A ; Mehdinezhad Roshan, A ; Sharif University of Technology
    2013
    Abstract
    Surface modification of titanium implants is recently considered by several researchers. In this study, PEO was performed over commercially Ti-6Al-4V alloy pellets in an aqueous electrolyte containing calcium acetate (C.A.) and calcium glycerphosphate (Ca-GP) with a Ca/P molar ratio of 6.8, and applying current density of 0.212 A/cm2, frequency of 100 Hz and duty ratio of 60% for 4 min. In the next step, hydrothermal treatments were carried out for various durations and at different temperatures inside an autoclave chamber containing a NaOH solution with pH of 11.5. XRD and SEM results confirmed formation of needle-shaped HAp after all hydrothermal conditions. Maximum intensity of HAp peaks... 

    Dielectrophoretic cell sorting via sliding cells on 3D silicon microelectrodes

    , Article Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS), 22 January 2017 through 26 January 2017 ; 2017 , Pages 147-150 ; 10846999 (ISSN) ; 9781509050789 (ISBN) Xing, X ; Chan, M. L ; Roshan, K. A ; Yobas, L ; Sharif University of Technology
    2017
    Abstract
    This work presents an innovative design for a flow-through dielectrophoretic cell sorting based on silicon bulk microelectrodes featuring sidewall undercuts. The microelectrodes are configured into an interdigitated array with digits extending across the flow chamber at an oblique angle against the flow stream. Target cells under dielectrophoretic forces and hydrodynamic drag can slide along the digits to a dedicated outlet. The design has been showcased for continuous-flow sorting of viable and non-viable mammalian cells, achieving a throughput of 16,600 cells/min, an order of magnitude higher than those reported for existing continuous-flow cell sorting designs using thin-film or... 

    Estimation of modal parameters using bilinear joint time-frequency distributions

    , Article Mechanical Systems and Signal Processing ; Volume 21, Issue 5 , 2007 , Pages 2125-2136 ; 08883270 (ISSN) Roshan Ghias, A ; Shamsollahi, M. B ; Mobed, M ; Behzad, M ; Sharif University of Technology
    2007
    Abstract
    In this paper, a new method is proposed for modal parameter estimation using time-frequency representations. Smoothed Pseudo Wigner-Ville distribution which is a member of the Cohen's class distributions is used to decouple vibration modes completely in order to study each mode separately. This distribution reduces cross-terms which are troublesome in Wigner-Ville distribution and retains the resolution as well. The method was applied to highly damped systems, and results were superior to those obtained via other conventional methods. © 2006 Elsevier Ltd. All rights reserved  

    Modal parameters identification using bilinear joint time-frequency analysis

    , Article International Conference on Noise and Vibration Engineering 2006, ISMA 2006, Heverlee, 18 September 2006 through 20 September 2006 ; Volume 5 , 2006 , Pages 2907-2919 Roshan Ghias, A ; Mobed, M ; Shamsollahi, M. B ; Behzad, M ; Sharif University of Technology
    Katholieke Universiteit Leuven  2006
    Abstract
    In this paper, a new method for modal parameter estimation using time-frequency representations is presented. Smoothed Pseudo Wigner-Ville representation which is a member of the Cohen's class distributions is used that reduces cross-terms in time-frequency plane dramatically and holds resolution as well. The method was applied to systems with high damping, and the results were superior to other conventional methods. © (2006) by the Katholieke Universiteit Leuven Department of Mechanical Engineering All rights reserved  

    Investigating the effect of ultrasound intensity on the magnetic properties of magnetite nanostructures synthesized by sonochemical method

    , Article International Journal of Engineering, Transactions B: Applications ; Volume 36, Issue 6 , 2023 , Pages 1034-1039 ; 1728144X (ISSN) Hassanjani Roshan, A ; Vaezi, M. R ; Koohestani, H ; Cheraghi, F ; Sharif University of Technology
    Materials and Energy Research Center  2023
    Abstract
    In this article, the synthesis of magnetite nanostructures was successfully carried out by the sonochemical process. In this method, stoichiometric amount of iron chlorides (FeCl3.6H2O and FeCl2.4H2O), ammonia (NH3) and polyvinylpyrolidone (PVP) were used to synthesize pure Fe3O4 nanoparticles. The effect of initial sonication power of the ultrasonic device on the size and morphology of the final products as one of the effective parameters was investigated. For this, the initial power of the sonicator was evaluated at 90, 70, 50 and 30 W at 40°C. Characterization of Fe3O4 nanoparticles was done by transmission electron microscope (TEM) and X-ray powder diffraction (XRD) and its magnetic... 

    Performance characterization of a low-cost dual-channel camera-based microarray scanner

    , Article 24th Iranian Conference on Electrical Engineering, ICEE 2016, 10 May 2016 through 12 May 2016 ; 2016 , Pages 1534-1538 ; 9781467387897 (ISBN) Akhoundi, F ; Ghobeh, M ; Ghiasvand, E ; Akbari Roshan, K ; Motahari, S. A ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2016
    Abstract
    In this paper, we have proposed, designed, implemented, and characterized a low-cost camera-based microarray scanner which is capable of imaging fluorescently-labeled DNA or Protein microarrays. The proposed system is designed to simultaneously measure two different fluorescent dyes using two parallel channels which increase the overall scan speed. We have shown that the wide dynamic range of system makes it able to detect fluorophore densities from 100-106 molecule/μm2. In each capture, a 5.6 mm × 3.7 mm field is imaged on a 22.3 mm × 14.9 mm (18 megapixels) CMOS sensor. Therefore, the microarray can be scanned with ∼ 1μm2 spatial resolution which is high enough to distinguish borders of...